최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.27 no.3, 2010년, pp.282 - 289
김남이 (경기대학교 화학공학과) , 김성우 (경기대학교 화학공학과)
In preparation of silica aerogel-based hybrid coating materials, the combination of hydrophobic aerogel with organic polar binder material is shown to be very limited due to dissimilar surface property between two materials. Accordingly, the surface modification of the aerogel would be required to o...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
본 실험에 사용된 실리카 에어로겔은 어떤 특성을 갖고 있는가? | 본 실험에 사용된 실리카 에어로겔(Nanogel®, Cabot Co.)은 분말형태로 기공율 95 %, 기공크기 20-40 nm, 비표면적 750 m2/g, 열전도도 0.012 W/m·K 인 특성을 갖고 있다. 물리적 흡착에 의한 표면 개질을 위해 비교적 분자량이 작은 sorbitan monolaurate (SPAN 20)와 sorbitan monostearate (SPAN 60), 그리고 고분자 구조의 polyethyleneglycol hexadecylether (BRIJ 56)와 polyoxyethylene sorbitan monolaurate (TWEEN 20) 등 네 종류의 계면활성제를 사용하였다. | |
실리카 에어로겔이 초 단열재, 촉매 담체, 반도체 소자의 유전물질 및 흡음제 등 다양한 분야에 응용이 가능한 것으로 인식되어지는 이유는 무엇인가? | 실리카 에어로겔(silica aerogel)은 수십 나노미터 크기의 기공으로 이루어진 극저밀도 첨단 소재로서 열전도도 및 유전상수가 매우 낮고, 기공율과 비표면적이 매우 높아 초 단열재, 촉매 담체, 반도체 소자의 유전물질 및 흡음제 등 다양한 분야에 응용이 가능한 것으로 인식되고 있다[1,2]. | |
최근에 초임계 건조 공정의 문제점을 해결하기 위해 어떤 연구가 진행되어 왔는가? | 그러나 이러한 초임계 건조 공정은 고비용이 소요되는 매우 위험한 공정으로 에어로겔의 다양한 산업 분야로의 응용을 제한하는 요소가 되었다[3]. 따라서 최근에는 이러한 문제점을 해결하기 위해 상압 건조 방식을 이용한 에어로겔 제조 공정 개발에 관한 연구가 진행되어 왔다[4-7]. 상압 건조 공정(ambient drying process)을 이용하여 실리카 에어로겔을 제조하는 경우 습윤겔 내에 발생하는 모세관력과 표면에 존재하는 –OH 기의 연속적인 축합반응으로 인하여 기공 구조의 붕괴를 초래할 수 있기 때문에 용매 치환 및 표면 개질 방법을 이용하여 이러한 현상을 극복하게 된다[8,9]. |
S. S. Kistler, Coherent Expanded Aerogels and Jellies, Nature, 127, 741 (1931).
M. Schmidt and F. Schwertfeger, Application for silica aerogel products, J. Non-Cryst. Solids, 225, 364 (1998).
T. Gerber, The subcritical preparation of aerogel based on sodium water glass, J. Sol-Gel Sci. Technol, 13, 323 (1998).
S. K. Kang, and S. Y. Choi, Synthesis of Silica Aerogel at Ambient Pressure and Characterization (I), J. Kor. Ceram. Soc., 33(12), 1394 (1996).
Y. G. Kwon, S. Y. Choi, and S. K. Kang, Synthesis of Silica Aerogel at Ambient Pressure and Characterization (II), J. Kor. Ceram. Soc., 36(11), 1189 (1999).
T. Wei, T. Chang, S. Lu, and Y. Chang, Preparation of monolithic silica aerogel of low thermal conductivity by ambient pressure drying, J. Am. Ceram. Soc., 90, 1551 (2007).
D. M. Smith, R. Deshpande, and C. J. Brinker, "Preparation of low-density aerogels at ambient pressure", Mat, Res. Soc. Symp. Proc., 271, 567 (1992).
S. W. Ryu, S. S. Kim, and Y. J. Oh, Influence of solvent on the nano porous silica aerogels prepared by ambient drying process, J. Kor. sensors soc., 15(5), 371 (2006).
J. L. Gurav, D. Y. Nadargi, and A. V. Rao, Effect of mixed Catalysts system on TEOS-based silica aerogels dried at ambient pressure, J. Appl. Surf. Sci., 255, 3019 (2008).
S. S. Prakash and C. J. Brinker, Silica aerogel film prepared at ambient pressure by using surface derivatization to induce reversible drying shrinkage, Nature, 374, 439 (1995).
S. D. Bhagat, C. Oh, Y. Kim, Y. Ahn, and J. Yeo, Methyltrimethoxysilane based monolithic silica aerogel via ambient pressure drying, J. Micromeso., 100, 350 (2007).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.