최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.19 no.1, 2010년, pp.114 - 120
Optimization of the turning process has been concentrated on the selection of the optimal cutting parameters, such as cutting speed, feed rate and depth of cut. However, optimization of the cutting parameters does not necessarily guarantee the maximum profit. For the maximization of the profit, para...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Aggarwal, A, Singh, H., Kumar, P., and Singh, M., 2008, "Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique-A comparative analysis," Journal of Materials Processing Technology, Vol. 200, pp. 373-384.
Kwak, J.-S., 2005, "Application of Taguchi and response surface methodologies for geometric error in surface grinding process," International Journal of Machine Tools & Manufacture, Vol. 45, pp. 327-334.
Hou, T.-H., Su, C.-H., and Liu, W-L., 2007, "Parameters optimization of a nano-particle wet milling proeess using the Taguchi method, response surface method and genetic algorithm," Powder Technology, Vol. 173, pp. 153-162.
Vining, G. G., 1990, "Combining Taguchi and Response Surface Philosophies: A Dual Response Approach," Journal of Quality Technology, Vol. 22, No. 1, pp. 38-45.
Davim, J. P., Gaitonde, V. N., and Kamik, S. R, 2008, "Investigations into the effect of cutting conditions on surfacc roughness in tuming of free machining steel by ANN models," Journal of Materials Processing Technology, Vol. 205, pp. 16-23.
Wu, S.-J, Shiah, S.-W, and Yu, W-L., 2009, "Parametric analysis of proton exchange membrane fuel cell performance by using the Taguchi method and a neural network," Renewable Energy, Vol. 34, pp. 135-144.
Ferreira, S. L. C., Bruns, R. E., Fen'eira, H. S., Matos, G. D., David, J. M., Brandao, G. C., da Silva, E. G. P., Portugal, L. A., dos Reis, P. S., Souza, A. S., and dos Santos, W. N. L., 2007, "Box-Behnken design: An altemative for the optimization of analytical methods," Analytica Chinica Acta, Vol. 597, pp. 179-186.
Lee, H.-W. and Kwon, W. T., "Determination of the minute region for RSM to identify the optimum cutting conditions during turning on CNC lathe," submitted for publication.
Oh S.-H. and Lee, B.-C., 2000, "A Global Optimization Algorithm Based on the Extended Domain Elimination Method," The Korean Society of Mechanical Engineers, Vol. 24, No. 1, pp. 240-249.
Mo, J., Zhang, K., and Wei, Z., 2006, "A variant of SQP method for inequality constrained optimization and its global convergence," Journal of Computational and Applied Mathematics, Vol. 197, pp. 270-281.
Sun, W., 1998, ''Newton's method and quasi-Newton -SQP nethod for general LC constrained optimization," Applied Mathematics and Computation, Vol. 92, pp. 69-84.
von Schwerin, M., Deutschmann, O., and Schulz, V., 2000, " Process optimization of reactives systems by partially reduced SQP methods," Computers and Chemical Engineering, Vol. 24, pp. 89-97.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.