최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.34 no.2, 2010년, pp.303 - 309
이정길 (한국기술교육대학교 기계정보공학부) , 한기범 (충북대학교 기계공학과) , 김관우 (충북대학교 기계공학과) , 최종웅 (LS산전(주)) , 김재훈 (LS산전(주)) , 조해용 (충북대학교 기계공학부)
Copper tube rolling process using the planetary rolling mill has been studied by using finite element method. This rolling is process that makes copper tube by three-roll with mannesmann method. Also, rolling process has started from the cold working and finished to the hot working. This rolling pro...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
동의 특징은? | 동은 알루미늄, 아연, 납과 함께 4대 비철 금속으로서 철강재와 더불어 가장 널리 쓰이는 공업용 재료이며, 높은 열․전기전도성과 내식성, 내구성, 가공성 등이 뛰어난 재료이다. 특히 동 제품 중 동관은 냉동 공조기기, 열기기, 통신케이블, 급수, 급탕, 주택냉난방 등 생활과 밀접한 배관용 파이프로 널리 사용되어 수요가 증가되고 있다. | |
만네스만(Mannesmann) 공법의 압연 과정은? | 유성압연기에 의한 동관 압연공정은 3개의 원추형 롤이 각각 120° 각도로 위치하고 이 원추형 롤 사이에 수평연속주조기에 의해 제조된 동관이 투입되어 모관을 제조하는 만네스만(Mannesmann) 공법의 압연을 말한다. 이 압연공정에서는 예열되지 않은 냉간상태로 동재료를 투입하여, 압연 중단면감소율이 90 % 이상에 이르고 600~700 ℃의 높은 가공열로 가공이 진행된다. 그 공정에서 모관의 조직은 보다 균일화되고 재결정되며 이후 별도의 열처리과정 없이 동관이 제조된다. | |
동관의 제조방법은 어떻게 구별되는가? | 동관의 제조방법은 기존의 압출 방식과 신공법인 유성압연기에 의한 압연방식으로 크게 구별된다. 유성압연기에 의한 압연방식은 기존의 압출방식에 비해 제조공정의 단축과 제조원가의 절감이라는 장점을 갖고 있어 동관 제조업계에서 크게 주목받고 있다. |
C. K. Shih, C. Hung and R. Q. Hsu, "The finite element analysis on planetary rolling process", Journal of Materials Processing Technology, vol. 113, pp. 115-123, 2001.
R. J. Montecinos and E. S. Arauco, "An investigation into rolling process of copper tubes", Journal of Material Processing Technology, vol. 95, pp. 139-144, 1999.
S. J. Wu, Y. M. Hwang and M. H. Chang, "A three-dimensional finite element analysis of the three-roll planetary mill", Journal of Materials Processing Technology, vol. 123, pp. 336-345, 2002.
B. Li, S. H. Zhang, G. L. Zhang and H. Q. Zhang, "Prediction of 3-D temperature field of TP2 copper tubes in three-roll planetary rolling process", Journal of Materials Processing Technology, vol. 205, pp. 370-375, 2008.
K. Aoyagi and K. Ohta, "Material deformation, rolling load and torque in three-roll planetary mill", J. Jpn. Soc. Technol. Plasticity, vol. 24, pp. 1039-1047, 1983.
W. J. Ammerling and H. Brauer, "Application of 3-roll technology for rolling specialty rod and bar products", Iron Steel Eng. vol. 65, pp. 22-27, 1988.
W. J. Ammerling, "The knocks 3-roll technology for high precision specialty rod and bar products", Metal. Plant Techno., vol. 6, pp. 14-19, 1989.
T. Nishio, T. Noma, S. Karashige, H. Hino, T. Tsuta and K. Kadota, "Development of three-roll planetary mill(PSW)", Kawasaki Steel Tech. Rep., vol. 84, pp. 81-90, 1995
K. Komori, "Simulation of deformation and temperature in multi-pass three-roll rolling", J. Mater. Process. Techno., vol. 92, pp. 450-457, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.