포어 네트웍 모델들 (Pore network model)은 토양 공극의 구조를 조사할 때 유용한 도구들이다. 이런 모델들은 삼차원 이미지들에서 공극의 구조와 관련된 양적 정보를 제공한다. 이 연구는 포어 네트웍 모델을 이용하여 공극의 구조와 수리학적 특성들을 양적으로 측정하였다. 연구목표는 큰 크기의 이미지에서 공극의 구조에 관한 양적 정보를얻기 위해 포어 네트웍 모델을 적용하고, 토양수분특성과 수리 전도도를 삼차원 이미지로부터 계산하고 이 값들은 실험을 통해 얻어진 실험값들과 결합하여 토양의 수리적 특성을 분석하는 것이었다. 토양 시료들은 발티모아 도시 중심에 있는발티모어 과학센터에 위치한 실험부지에서 채취되었다. 불교란 원주형 시료들이 채취되었고, 22 ${\mu}m$ 의 해상도로 x선 단층 촬영되었다. 포어 네트웍은 중심축 변형에 의해 공극에서 축출되었고 이를 바탕으로 공극 구조가 계산되었다. 토양수분특성과 불포화 수리 전도도 값들은 토양 이미지에서 계산 되었다. 토양 밀도, 토양수분특성과 불포화 수리 전도도들은 3 토양 시료들로부터 실험을 통해 구하였다. 삼차원 이미지 분석은 토양 공극의 특성들을, 예를 들어 공극 부피, 길이, 굴곡도, 가장 정확히 분석하였다. 이런 정확한 분석은 토양 내 수문학적 정보를 정확히 산출할 수 있게 하였다. 계산된 값과 실험을 통한 실험치의 결합은 공극에 대한 더 광범한 범위를 분석할 수 있게 하였다. 이 연구를 통해 이미지에서 계산되고 측정된 수문학적 자료들은 토양 내대기공과 소기공을 모두 다 설명해 줄 수 있는 방법이라는 것이 밝혀졌다.
포어 네트웍 모델들 (Pore network model)은 토양 공극의 구조를 조사할 때 유용한 도구들이다. 이런 모델들은 삼차원 이미지들에서 공극의 구조와 관련된 양적 정보를 제공한다. 이 연구는 포어 네트웍 모델을 이용하여 공극의 구조와 수리학적 특성들을 양적으로 측정하였다. 연구목표는 큰 크기의 이미지에서 공극의 구조에 관한 양적 정보를얻기 위해 포어 네트웍 모델을 적용하고, 토양수분특성과 수리 전도도를 삼차원 이미지로부터 계산하고 이 값들은 실험을 통해 얻어진 실험값들과 결합하여 토양의 수리적 특성을 분석하는 것이었다. 토양 시료들은 발티모아 도시 중심에 있는발티모어 과학센터에 위치한 실험부지에서 채취되었다. 불교란 원주형 시료들이 채취되었고, 22 ${\mu}m$ 의 해상도로 x선 단층 촬영되었다. 포어 네트웍은 중심축 변형에 의해 공극에서 축출되었고 이를 바탕으로 공극 구조가 계산되었다. 토양수분특성과 불포화 수리 전도도 값들은 토양 이미지에서 계산 되었다. 토양 밀도, 토양수분특성과 불포화 수리 전도도들은 3 토양 시료들로부터 실험을 통해 구하였다. 삼차원 이미지 분석은 토양 공극의 특성들을, 예를 들어 공극 부피, 길이, 굴곡도, 가장 정확히 분석하였다. 이런 정확한 분석은 토양 내 수문학적 정보를 정확히 산출할 수 있게 하였다. 계산된 값과 실험을 통한 실험치의 결합은 공극에 대한 더 광범한 범위를 분석할 수 있게 하였다. 이 연구를 통해 이미지에서 계산되고 측정된 수문학적 자료들은 토양 내대기공과 소기공을 모두 다 설명해 줄 수 있는 방법이라는 것이 밝혀졌다.
Pore network models are useful tools to investigate soil pore geometry. These models provide quantitative information of pore geometry from 3D images. This study presents a pore network model to quantify pore structure and hydraulic characteristics. The objectives of this work were to apply the pore...
Pore network models are useful tools to investigate soil pore geometry. These models provide quantitative information of pore geometry from 3D images. This study presents a pore network model to quantify pore structure and hydraulic characteristics. The objectives of this work were to apply the pore network model to characterize pore structure from large images to quantify pore structure, calculate water retention and hydraulic conductivity properties from a three dimensional soil image, and to combine measured hydraulic properties from experiments with calculated hydraulic properties from image. Soil samples were taken from a site located at the Baltimore science center, which is located inside of the city. Undisturbed columns were taken from the site and scanned with a computer tomographer at resolutions of 22 ${\mu}m$. Pore networks were extracted by medial-axis transformation and were used to measure pore geometry from one of the scanned samples. Water retention and unsaturated hydraulic conductivity values were calculated from the soil image. Properties of soil bulk density, water retention and unsaturated hydraulic conductivity were measured from three replicates of scanned soil samples. 3D image analysis provided accurate detailed pore properties such as individual pore volumes, pore length, and tortuosity of all pores. These data made possible to calculate accurate estimations of water retention and hydraulic conductivity. Combination of the calculated and measured hydraulic properties gave more accurate information on pore sizes over wider range than measured or calculated data alone. We could conclude that the hydraulic property computed from soil images and laboratory measurements can describe a full structure of intra- and inter-aggregate pores in soil.
Pore network models are useful tools to investigate soil pore geometry. These models provide quantitative information of pore geometry from 3D images. This study presents a pore network model to quantify pore structure and hydraulic characteristics. The objectives of this work were to apply the pore network model to characterize pore structure from large images to quantify pore structure, calculate water retention and hydraulic conductivity properties from a three dimensional soil image, and to combine measured hydraulic properties from experiments with calculated hydraulic properties from image. Soil samples were taken from a site located at the Baltimore science center, which is located inside of the city. Undisturbed columns were taken from the site and scanned with a computer tomographer at resolutions of 22 ${\mu}m$. Pore networks were extracted by medial-axis transformation and were used to measure pore geometry from one of the scanned samples. Water retention and unsaturated hydraulic conductivity values were calculated from the soil image. Properties of soil bulk density, water retention and unsaturated hydraulic conductivity were measured from three replicates of scanned soil samples. 3D image analysis provided accurate detailed pore properties such as individual pore volumes, pore length, and tortuosity of all pores. These data made possible to calculate accurate estimations of water retention and hydraulic conductivity. Combination of the calculated and measured hydraulic properties gave more accurate information on pore sizes over wider range than measured or calculated data alone. We could conclude that the hydraulic property computed from soil images and laboratory measurements can describe a full structure of intra- and inter-aggregate pores in soil.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
가설 설정
Computed hydraulic conductivity from a soil and average hydraulic conductivity of measurements data from the three soils and fitted line by Eq. 8. Circle symbols represent data from the urban soil and square symbols do data from the rural soil. Solid line is fitted line for the urban soil and dash line is for the rural soil.
제안 방법
The objectives of this study were to characterize soil pore geometry, from a three dimensional image, based on a pore network model, to compute hydraulic properties from the image and to combine measured hydraulic properties from experiments with calculated hydraulic properties from images to describe accurate pore structure.
An undisturbed bulk soil (5.5 cm in diameter and 12 cm in height) was sampled from each of the three plots by excavating a sample carefully. The outside of each sample was covered by cheesecloth with saran to harden the surface of the sample.
Water flow in a pore is controlled by throat size instead of pore-body size. Throat and tortuosity results from all samples were applied to water retention and hydraulic conductivity calculation. Computed water retention data and measured data from laboratory experiments were matched and fitted by Eq.
대상 데이터
The site selected for this study was located at the Baltimore science center, which is located inside of the city. In 2002, the top 20 cm of a fallow soil that did not have any fertilizer applications for 5 years was removed from the Beltsville experimental farm over a 6 × 9 m.
An axial X-ray micro computer tomographer (model MS, General Electric Medical Systems, London, ON, Canada) located at the University of Guelph (ON, Canada) was used to scan soil samples. The resolution of the scans was 22 μm for the bulk soil samples.
이론/모형
A Fortran code was written to identify pores and quantify number of pores, pore volumes, number of throats, throat volumes, pore length and tortuosity from the scanned image. The calculation was based on pore network model developed by Lindquist et al. (1996). Medial-axis skeletonization was applied to extract representative pore geometry and pore networks (Lindquist and Venkatarangan, 1999).
참고문헌 (35)
Abenny-Mickson, S., T. Miura, and A. Yomota. 1996. Evaluation of two soil water retention models for the prediction of hydraulic conductivity of Daisen Kuroboku (volcanic ash) soil. Soil Phys. Cond. Plant Growth Jpn. 74:17-27.
Amemiya, M. 1965. The influence of aggregate size on soil moisture Content capillary conductivity relations. Soil Sci. Soc. Am. Proc. 29:744-748.
Balland, V., J.A. P. Pollacco, and P.A. Arp.2008. Modeling soil hydraulic properties for a wide range of soil conditions. Ecol. Model. 219(3-4):301-316.
Bastardie. F.Y., Capowiez, J.R. de Dreuzy, and D. Cluzeau. 2003. X-ray tomographic and hydraulic charactcrization of burrowing by three earthworm species in repacked soil cores. Appl. Soil Ecol. 24(1):3-16.
Durner, W., E. Priesack. H.J. Vogel, and T. Zurmuhl. 1999. Determination of parameters for flexible hydraulic functions by inverse modeling. In: M. Th. van Genuchten, F. J. Leij and L. Wu (eds.) Proc. Int. Workshop, Characterization and Measurement of the Hydraulic Properties of Unsaturated Porous Media. p. 817-830. University of California, Riverside, CA.
Elliot, T. R. and R. J. Heck. 2007 A comparison of optical and X-ray CT technique for void analysis in soil thin section. Geoderma. 141 (1-2):60-70.
Gimenez. D., E. Perfecl. W.J. Rawls. and Y. Pachepsky. 1997. Fractal models for predicting soil hydraulic properties: a review. Eng Geol. 48 (3-4): 161-183.
Green R.E. and J.C. Corey. 1971. Calculation of hydraulic conductivity: A further evaluation of some predictive methods. Soil Sci. Soc. Am. Proc. 32(561-565).
Hayashi,Y., K. Ken'ichirou, and T. Mizuyama. 2006. Changes in pore size distribution and hydraulic properties of forest soil resulting from structural dcvelopment. J. Hydrol. 331:85-102.
Horn, R. and A.J.M. Smucker. 2005. Structure formation and its consequences for gas and water transport in unsaturated amble and forest soils. Soil Tillage Res. 82:5-14.
Lindquist, W.B., S.M. Lee, D.A. Coker, K.W. Jones, and P. Spanne. 1996. Medial axis analysis of void Structure in three-dimensional tomographic images of porous media. J. Geophys. Res. 101(B4):8297-8310.
Pagliai. M., M. Raglione. T. Panini. M.Malclla. and M. Lamarca. 1995. The structure of two alluvial soils in Italy after ten years of conventional and minimum tillage. Soil Till. Res. 34 (4):209-223.
Pagliai M. and Vignozzi N. 2002. The soil pore system as an indicator of soil quality. Advances in Geoecology, 35.
Peth, S., R. Horrn, F. Beckmann. T. Donath, J. Fischer. and A.J.M. Smucker. 2008. Three. dimensional quantification of intra-aggregate pore-space features using synchrotron-radiation based microtomography. Soil Sci. Soc. Am. J. 72(4):897-907.
Pires. L.F., J.R. Macedo. M.D. Souza. O.O.S. Bacchi, and K. Reichardt. 2005. Gamma-ray computed tomography to investigate compaction on sewage-sludge-treated soil. Appl. Radiat. Isot. 59(1): 17-25.
Pires, L.F., M. Cooper, F.A .M. Cassaro. K. Reichardt, O.O.S. Bacchi, and N.M.P. Dias. 2008. Micromorphological analysis to characterize structure modifications of soil samples submitted to wetting and drying cycles. Catena. 72(2):297-304.
Posadas, A.N.D., D. Gimenez, M. Bittelli, C. M. P. Vaz, and M. Flury. 2003. Multifractal characterization of soil particle-size distributions. Soil Sci. Soc. Am. J. 65(5):1361-1367.
Sleutel. S., V. Cnudde, B. Masschaele, J. Vlassenbroek , M. Dierick, L. Van Hoorebeke, P. Jacobs, and S. De Neve. 2008. Comparison of different nano- and micro-focus X-ray computed tomography set-ups for the visualization of the soil microstructure and soil organic matter. Comput. Geosci. 34(8): 931-938.
Spohrer, K., L. Herrmann,J. Ingwersen, and K. Stahr. 2006. Applicability of uni-and bimodal retention functions for water flow modelling in a tropical acrisol. Vadose Zone J. 5: 48-58.
Strudley, M.W., T.R. Green. and J.C. Ascough. 2008. Tillage effects on soil hydraulic properties in space and time: State of the science. Soil Till. Res. 99:4-48.
Tamboli. P.M. W.E. Larson, and M. Amemiya. 1964. Influence of aggregate size on moisture retention. Iowa Acad. Sci. 71: 103-108.
Udawatta, R.P. and S.H. Anderson. 2008. CT-measured pore characteristics of surface and subsurface soils influenced by agroforestry and grass buffers. Geoderma. 145(3-4):381-389.
Ventrella. D., N. Losavio. A.Y. Vonella, and F.J. Leij. 2005. Estimating hydraulic conductivity of a fine-textyred soil using tension infiltrometry. Geoderma. 124(3-4):267-277.
Vervoort, R.W. and S.R. Cattle. 2003. Linking hydraulic con ductivity and tortuosity parameters to pore space geometry and pore size distribution. J. Hydrol. 272 (1-4):36-49.
Wosten, J. H. M. and M.T. van Genuchten. 1988. Using texture and other soil properties to predict the unsaturated soil hydraulic functions. Soil Sci. Soc. Am. J. 52: 1762-1770.
Ziska. L.H., J.A. Bunce, and E.W. Goins. 2004. Characterization of an urban-rural CO2/temperature gradient and associated changes in initial plant productivity during secondary succession. Oecologia. 139 (3):454-458.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.