최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.19 no.3, 2010년, pp.370 - 375
Tungsten carbide microshaft is used as micro punch, electrode of micro electro discharge machining, and micro tool because of its high hardness and rigidity. In this research, tungsten carbide microshaft was fabricated using electrochemical machining.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Muller, E. W. and Tsong, T. T., 1969, Field ion microscopy, Elsevier, New York, USA.
Fotino, M., 1993, "Tip sharpening by normal and reverse electrochemical etching," Rev. Sci. Instrum. Vol. 64, No. 1, pp. 159-167.
Morikawa, H. and Goto, K., 1988, "Reproducible sharp-pointed tip preparation for field ion microscopy by controlled AC polishing," Rev. Sci. Instrum. Vol. 59, No. 10, pp. 2195-2197.
In, C. H., Kim, G. M., and Chu, C. N., 2001, "Fabrication of tungsten probe using electro-chemical etching," J. Kor. Soc. Prec. Eng., Vol. 18, No. 2, pp. 111-118.
Lim, Y. M., Lim, H. J., and Kim, S. H., 2001, "Fabrication of microshafts using electrochemical process," J. Kor. Soc. Prec. Eng. Vol. 18, No. 3, pp. 169-174.
Human, A. M., Roebuck, B., and Exner, H. E., 1998, "Electrochemical polarization and corrosion behavior of cobalt and Co (W, C) alloys in 1N sulphuric acid," Materials Sci. and Eng. A241, pp. 202-210.
Kang, M. J., 2001, Production of tungsten carbide microshaft using electro-chemical machining, M.S. Dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, Republic of Korea.
Masuzawa, T. and Kimura M., 1991, "Electrochemical surface finishing of tungsten carbide alloy," Annals of the CIRP, Vol. 40, No. 1, pp. 199-202.
Kim, B. H. and Chu, C.N., 2007, "Electrochemical micro machining with ultra-short pulse," KSMTE, Vol. 16, No. 2, pp. 7-11.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.