다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국공작기계학회지 = Journal of the Korean society of machine tool engineers, v.19 no.3, 2010년, pp.414 - 418
AI-Helper
Due to the increasing demand for carious methodologies to improve the quality of products were introduced. A Brush the most frequently used type of grinding process is one of the deburring. in order to produce consistent burr shape, various machining conditions have been combined and applied to disk...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Park, D. S., Han, J. Y., Seong, E. J. and Han, I. Y., 2006, "Deburring of the Inner Edge in Intersection Hole by Powder Blasting," Proceedings of the KSMPE spring Conference in 2006, pp. 44-49
Choi, G. J., Kim, Y. W., Shin, S. W. and Ahn, D. S., 1998, "Deburring of Irregular Burr using Vision and Force Sensors," Journal of the KSPSE, Vol. 2, No. 3, pp. 83-88
Won, J. Y., Choi, Y. J., Lee, S. Y. and Choi, H. J., 2003, "Deburring Technology Using Ultrasonic Cavitation," Proceedings of the KSME fall Conference in 2003, pp. 1798-1803
Shin, S. W., Gal, C. S. and Ahn, D. S., 1996, "A Study on the Automation of Deburring Process Using Expert's Skills," Proceedings of the KSPE fall Conference in 1996, pp. 685-688
Bae, J. Y., Joo, Y. M., Kim, J. U. and Lee, S. R., 2002, "A Development of Deburring System using Vision Sensor," Proceedings of the KSME spring Conference in 2002, pp. 900-904
Park, K. T. and Choi, J. W., 1994, "Intelligent Robot System for Deburring," Proceedings of the KSPE spring Conference in 1994, pp. 371-376
Shin. K. S., 2001, A study on the Analysis and Optimization of Brush Grinding Process, A Thesis for a Doctorate, Kyung Hee University, Republic of Korea.
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.