최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국해안·해양공학회논문집 = Journal of Korean Society of Coastal and Ocean Engineers, v.22 no.3, 2010년, pp.191 - 201
김승우 (서울대학교 건설환경공학부) , 서경덕 (서울대학교 건설환경공학부)
The breakwaters are designed by considering the cost optimization because a human risk is seldom considered. Most breakwaters, however, were constructed without considering the cost optimization. In this study, the optimum return period, target failure probability and the partial safety factors were...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반적인 구조물의 설계시 고려하는것은? | 일반적인 구조물은 인명 피해, 경제적 손실 그리고 사회 · 환경적 손실에 따라 중요도를 구분하여 설계하며 특히 교량, 고층빌딩 등은 인명 피해에 대한 높은 안전기준을 가지고 설계한다. 유럽의 일반적 토목구조물의 설계기준인 JCSS(2004, Joint Committee on Structural Safety)와 ECS(EN 1990)는 인명 피해에 따른 경제적 손실과 사회 · 환경적 손실을 고려한 확률론적 설계기준을 제시하고 있다. | |
Burcharth and Sorensen는 무엇을 수행하여 최적설계중량을 산정하였는가? | 이에 국내외 연구자들은 방파제의 비용최적설계 방법을 사용하여 설계기준을 제안하고자 노력하고 있다. Burcharth and Sorensen(2005)은 사석과 Cubes로 피복된 경사식 방파제에 대해 비용최적설계를 수행하여 최적설계중량을 산정하였다. Castillo et al. | |
van der Meer(1988)의 공식은 어떤 경우에만 유효한가? | Tetrapod의 중량을 산정하는 안정식은 van der Meer(1988)의 공식을 사용한다. 하지만 제안된 공식은 구조물의 경사가 1:1.5일 때만 유효하다. 그러나 실제 경사식 방파제는 구조물의 경사가 1:1. |
국토해양부 (2008). 2008년 하반기 건설공사 실적공사비 적용 공종 및 단가.
Burcharth, H.F. (2000). State of the art in conceptual design of breakwaters, Coastal Structures '99(ed I.J. Losada), A.A. Balkema, Rotterdam, 3-20.
Burcharth, H.F., Sorensen, J.D. (2005). Optimum safety levels for breakwaters, Proc. Coastline, Structures and Breakwaters, London, UK, 1-13.
Burcharth, H.F. (2009). Personal communication.
Castillo, E., Losada, M.A., Minguez, R., Castillo, C., Baquerizo, A. (2004). Optimal engineering design method that combines safety factors and failure probabilities: Application to rubble mound breakwaters, J. Waterway, Port, Coastal and Ocean Engineering, ASCE, 130(2), 77-88.
European Committee for Standardisation (1990). Eurocode 1 and 2 for Actions on Structures, European Committee for Standardisation.
Hudson, R. Y. (1959). Laboratory investigation of rubble mound breakwaters, J. Waterway and Harbors Division, ASCE, 85(WW3), 93-121.
Italian recommendation (1996). Technical instructions for the design of maritime dikes.
JCSS (2004). Probabilistic Model Code Part 1-Basic of design.
ROM 0.0 (2002). Recommendatons for Marine Structures. General procedure and requirements in the design of harbor and maritime structures. Part 1. Puertos del Estado, Ministerio de Fomento, Spain
Suh, K.D., Kim, K.S., Kim, D.L. (2010). Effects of discount rate and various costs on optimal design of caisson breakwater, J. Civil Engineering, KSCE, 14(2), 99-109.
US Army Corps of Engineers(2006). Coastal Engineering Manual, U.S. Army Corps of Engineers, Washington, D.C. (in 6 volumes)
van der Meer, J. W. (1988). Stability of Cubes, Tetrapods and Accropods, Proc. of the Breakwaters '88 Conference; Design of Breakwaters, Institution of Civil Engineers, Thomas Telford, London, UK, 71-80.
Vrijling, J.K., Voortman, H.G., Burcharth, H.F., and Sorensen, J.D. (2000). Design philosophy for a vertical breakwater, Coastal Structures '99(ed I.J. Losada), A.A. Balkema, Rotterdam, 631-635.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.