참고문헌 (16)

1. Journal of Sound and Vibration D. C. Conrad 188 3 301 1995 10.1006/jsvi.1995.0595 Conrad, D. C. and Soedel, W., “On the Problem of Oscillatory Walk of Automatic Washing Machines,” Journal of Sound and Vibration, Vol. 188, No. 3, pp. 301-314, 1995. 

   상세보기

2. Proceedings of the 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics E. Papadopoulos 2 899 2001 Papadopoulos, E. and Papadimitrious, I., “Modeling, Design and Control of a Portable Washing Machine during the Spinning Cycle,” Proceedings of the 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Vol. 2, pp. 899-904, 2001. 

3. Choi, J. Y., Lee, J. M., Lee, J. S., Park, N. C. and Park, Y. P., “A Study on the Dynamic Behavior and Comparative Analysis of a Suspension Type Pulsator/Drum Type Washing Machine,” Journal of the Korean Society for Noise and Vibration Engineering, Annual Spring Conference, pp. 1134-1139, 2003. 

4. 10.1007/978-94-015-8173-8 Lee, C. W., “Vibration Analysis of Rotors,” Kluwer Academic Publishers, 1993. 

   

5. Mechanical Systems and Signal Processing Y. S. Han 13 5 723 1999 10.1006/mssp.1998.1202 Han, Y. S. and Lee, C. W., “Directional Wigner Distribution for Order Analysis in Rotating/Reciprocating Machines,” Mechanical Systems and Signal Processing, Vol. 13, No. 5, pp. 723-737, 1999. 

   상세보기

6. The Korean Society of Mechanical Engineers S. W. Hong 12 5 976 1988 Hong, S. W. and Lee, C. W., “Dynamic Analysis of Spin Speed Dependent Parameter Rotor-Bearing Systems,” The Korean Society of Mechanical Engineers, Vol. 12, No. 5, pp. 976-983, 1988. 

7. Joe, M. K., Joe, Y. G., Kim, D. W., Lee, J. Y. and Oh, J. E., “Dynamical behavior of the eccentric rotor system using mathematical modeling,” Journal of the Korean Society for Noise and Vibration Engineering, Annual Spring Conference, pp. 313-318, 2003. 

8. Int. J. Precis. Eng. Manuf. B. H. Kim 10 2 17 2009 10.1007/s12541-009-0022-3 Kim, B. H, “Modeling and Analysis of Robotic Dual Softfingered Writing,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 2, pp. 17-23, 2009. 

   원문보기 상세보기

9. Journal of Sound and Vibration W. S. Kim 285 3 547 2005 10.1016/j.jsv.2004.08.016 Kim, W. S., Lee, D. J. and Chung, J. T., “Three-dimensional Modeling and Dynamic Analysis of an Automatic Ball Balancer in an Optical Disk Drive,” Journal of Sound and Vibration, Vol. 285, No. 3, pp. 547-569, 2005. 

   상세보기

10. Int. J. Precis. Eng. Manuf. J. E. Oh 8 3 54 2007 Oh, J. E., Lee, C. H., Sim, H. J., Lee, H. J., Kim, S. H. and Lee, J. Y., “Development of a System for Diagnosing Faults in Rotating Machinery using Vibration Signals,” Int. J. Precis. Eng. Manuf., Vol. 8, No. 3, pp. 54-59, 2007. 

11. Int. J. Precis. Eng. Manuf. M. R. Parlapalli 9 4 22 2008 Parlapalli, M. R., Bin, G., Dongwei, S. and Fujii, Y., “Dynamic Response Measurement of the Head Arm Assembly of a Hard Disk Drive b Numerical Analysis and Experiments,” Int. J. Precis. Eng. Manuf., Vol. 9, No. 4, pp. 22-25, 2008. 

12. 10.1016/0022-460X(92)90387-D Rao, S. S., “Mechanical Vibration,” Addison Wesley, 1992. 

    상세보기

13. Seo, H. S., Lee, T. H. and Jeon, S. M., “Optical Design of an Auto-leg System for Washing Machines,” Journal of the Korean Society for Noise and Vibration Engineering, Annual Spring Conference, pp. 996-1001, 2006. 

14. Int. J. Precis. Eng. Manuf. I. S. Son 9 3 72 2008 Son, I. S., Cho, J. R. and Yoon, H. I., “Effects of a moving Mass on the Dynamic Behavior of Cantilever Beams with Double Cracks,” Int. J. Precis. Eng. Manuf., Vol. 9, No. 3, pp. 72-74, 2008. 

15. Int. J. Precis. Eng. Manuf. H. Su 7 2 36 2006 Su, H. and Chong, T., “A Practical Method of Balancing a Rigid Rotor,” Int. J. Precis. Eng. Manuf., Vol. 7, No. 2, pp. 36-40, 2006. 

16. Wlerzba, P., Cao, W., Park, C. W., Park, J. S. and Kim, H. K., “Development of Balancer for Reduced Vibration of Washing Machine,” Proceeding of Korean Society of Precision Engineering Spring Conference, pp. 602-607, 1997. 

저자의 다른 논문 :

정의봉 (127)