최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국가시화정보학회지= Journal of the Korean society of visualization, v.8 no.3, 2010년, pp.12 - 21
장태현 (한국과학기술정보연구원) , 도덕희 (한국해양대학교 기계정보공학부) , 이권수 (한국국제대학교 기계자동차공학부)
Swirling flows are found in very wide range of applications, for examples, cyclone separators, spraying machines, heat exchangers and jet pumps, ect. Relatively, little work has been done on the swirl flow using flow visualization techniques. This study deals with many visualization techniques to st...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
선회유동은 어디에 이용되었는가? | 지난 50여년간 선회유동은 학문적이나, 기술적으로 중요하여 광범위하게 연구가 계속되어왔다. 선회유동은 관내 유동에서 열전달을 향상시킨다는 것은 잘 알려져 왔고, 이와 같은 장점을 이용하여, 이 유동은 각종 열교환기, 엔진, 선회 제트, 사이클론 분리기, 분사기 분무기 그리고 각종 연소장치에 이용되었다. 선회유동의 특징을 연구하기 위하여 많은 가시화기법이 사용되었다. | |
선회유동의 장점은? | 지난 50여년간 선회유동은 학문적이나, 기술적으로 중요하여 광범위하게 연구가 계속되어왔다. 선회유동은 관내 유동에서 열전달을 향상시킨다는 것은 잘 알려져 왔고, 이와 같은 장점을 이용하여, 이 유동은 각종 열교환기, 엔진, 선회 제트, 사이클론 분리기, 분사기 분무기 그리고 각종 연소장치에 이용되었다. 선회유동의 특징을 연구하기 위하여 많은 가시화기법이 사용되었다. | |
선회유동에 대한 가시화기법 중 Nuttall이 시행한 것은? | 선회유동의 특징을 연구하기 위하여 많은 가시화기법이 사용되었다. Nuttall(1)은 수직관에서 염색액을 사용하여 세 개의 역유동현상을 관찰하였고, Binnie 등(2)은 깔대기형 수직관에서 lycopodium 분말을 이용하여 선회유동을 연구하였다. |
John B. Nuttall, 1953, “Axial flow in a vortex”, NATURE, Vol. 172, No. 4378, pp. 582-583.
A. M. Binnie and J. D. Teare, 1957, “Experiments on the flow of swirling water through a pressure nozzle and open trumpet”, Quart J. of Mech. And applied Math., Vol. X, part. 3, pp. 78-89.
Shy Woei Chang, Tsun Lirng Yang, 2009, “Forced convective flow and heat transfer of upward cocurrent air-water slug flow in vertical plain and swirl tubes”, Experimental Thermal and Fluid Science 33, pp. 1087-1099.
H. Mak and S. Balahani, 2007, “Near field characteristics of swirling flow past a sudden expansion”, Chemical engineering science Vol. 62, pp. 6726-6746.
M. P. Escudier and J. J. Kellert, 1985, “Recirculation in swirling flow: A manifestation of vortex breakdown”, AIAA J., Vol. 23, No. 1, pp. 111-116
E. M. Sparrow and A. Chaboki, 1984, “Swirlaffected turbulent fluid flow and heat transfer in a circular tube”, J. of heat transfer, Vol. 106, pp. 766-773.
B. R. Clayton and Y. S. M. Morsi, 1984, “Determination of principal characteristics of turbulent swirling flow along annuli”, J. Heat & fluid flow, Vol. 5, No. 4, pp. 195-203.
C. C. Wan and J. E. R. Coney, 1982, “An investigation of adiabatic spiral vortex flow in wide annular gaps by visualization and digital analysis”, J. Heat & fluid flow, Vol. 3, No. 1, pp. 39-44.
Tae-Hyun Chang, 2009, “Experimental studies on heat transfer enhancement with swirling flow in the circular tubes using uniform heat flux”, The Int. Conference on Fluid and Thermal Energy Conversion pp. 17-24.
Chang T. H. and Lee H. S., 2003, “An experimental study on swirling flow in a 90 degree circular tube by using particle image velocimetry”, J. of Visualization, Vol. 6, No. 4, pp. 343-352.
W. H. Hallett and R. Gunther, 1984, “Flow and mixing in swirling flow in a sudden expansion”, The Canadian J. of chemical engineering, Vol. 62, pp. 149-155.
Lamboune, N. C. and Bryer, D. W., 1961 “The bursting of leading edge vortices; Some observations and discussion of the phenomenon”, Aeronautical research council, R&MM3282.
Hartmut H. Bossel, 1968, “Vortex breakdown flow field”, The Physics of Fluids, Vol. 12, No. 3, pp. 498-508.
John J. Cassidy and Henry T. Falvey, 1970, “Observations of unsteady flow arising after vortex breakdown”, J. Fluid Mech. Vol. 41, part 4, pp. 724-736.
W. J. Grabowski and S. A. Berger, 1976, “Solution of Navier-Stokes equations vortex breakdown”, J. fluid mechan. Vol. 75, part 3, pp. 525-544.
Sidney Leibovich, “Vortex stability and breakdown: Survey and extension”, AAIA, J., Vol. 22, No.9, 1983, pp. 1192-1206
Sidney Leibovich, 1978 “The structure of vortex breakdown”, Ann. Rer. Fluid Mech.. pp.221-246.
Tae-Hyun Chang, 2005, “An experimental study on the wake behind a round cylinder with swirling flow in the horizontal circular tube”, J. of the Korean Society of Marine Engineers, Vol. 29, No. 4, pp. 417-425.
Tae-Hyun Chang and Deog-hee Doh, 2003, “An experimental study on temperature velocity fields of the turbulent flow horizontal cylindrical tube by using thermo-sensitive liquid crystal”, J. of the Korean Society of Marine Engineers, Vol. 27, No. 7, pp. 921-929.
K. Bakirci, K. Bilen, 2007, “Visualization of heat transfer for impinging swirl flow”, Experimental thermal and fluid science 32 pp. 182-191.
W. S. Lewellen, 1962, “A solution for three-dimensional vortex flows with strong circulation”, J. of fluid mechanics, Vol. 14, pp. 420-432.
J. N. Cannon, W. M. Kays, “Heat transfer to a fluid flowing inside a pipe rotating about its longitudinal axis”, J. of heat transfer, pp. 135-139.
J. M. Khodadadi, and N. S. Vlachos, 1987, “Computation of confined swirling flow: effects of boundary conditions and turbulence model”, Numerical methods in laminar and turbulent flow, pp. pp. 458-461.
K. C. Cheng and F. P. Yuen, 1987, “Flow visualization experiments on secondary flow patterns in an isothermally heated curved pipe”, J. of heat transfer, Vol. 109, pp. 55-61.
K. C. Cheng and F. P. Yuen, 1987, “Flow visualization studies on secondary flow patterns in straight tubes downstream of a 180 deg bend and in isothermally heated tubes”, J. of heat transfer, Vol. 109, pp. 49-54.
J. K. Harvey, 1962, “Some observations of the vortex breakdown phenomenon”, J. of fluid mechanics, Vol. 14, pp. 585-593.
Smith Eiamsa-ard, Pongjet Promvonge, 2005, “Enhancement of heat transfer in a tube with regularly-spaced helical swirl generators”, Solar energy Vol. 78, pp. 483-494.
Z. Zhao, D. W. Yuen, C. W. Leung, T. T. Wong, 2009, “Thermal performance of a premixed impinging circular flame jet array with induced-swirl”, Applied Thermal engineering, Vol. 29, pp. 159-166.
Tae-Hyun Chang, 2009, “Experimental studies on heat transfer enhancement with swirling flow in the circular tubes using uniform heat flux”, The Int. Conference on Fluid and Thermal Energy Conversion pp. 17-24.
D. L. Rhode and D.G. Lilley, D. K. McLaughlin, “Mean flow fields in axisymmetric combustor geometries with swirl”, AIAA J. , Vol. 21, No. 4, 1983, pp. 593-600.
R.J.K. Wood, T.F. Jone, N.J. Miles, J. Ganeshalinggam, 2001, “Upstream swirl-induced for reduction of erosion damage from slurries in pipeline bends”, Wear 250, pp. 770-778.
D. L. Rhode, D. G. Lilley and D. K. McLaughlin, 1983, “On the prediction of swirling flow field found in axisymmetric combustor geometries”, J. of fluids engineering, Vol. 104, pp. 378-384.
A. K. GUPTA, D. G. LILLEY and N. SYRED, 1984. SWIRL FLOWS, Tunbridge Wells, Kent & Cambridge, Mass,
Tae-Hyun Chang, 2008, “An experimental study on swirling flow in a sudden expansion tube using the 3D PIV technique”, Proceeding of 12th Asian congress of fluid mechanics, 17-21 August, Daejeon, Korea
可視化情補學會 編, 2002년 7월, PIV ハンドブック, 森北出版株式會社.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.