최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.35 no.12, 2011년, pp.1663 - 1668
김종도 (한국해양대학교 기관공학부) , 송무근 (한국해양대학교 대학원) , 황현태 (자동차부품혁신센터)
Surface hardening treatment is required to improve the wear-resistance of press die because severe abrasion of die occurs during the drawing process in which the forming of the automotive body is completed and during the trimming process in which the unnecessary parts are cut. In this study, experim...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
프레스 금형을 제작하는데 있어서 주조성 및 절삭성이 좋은 주철이 금형 재료로 현재 많이 사용되고 있는 이유는? | 프레스 금형을 사용하여 자동차 차체를 성형하는 가공공정은 박판소재를 원하는 형상으로 제작하는 공정으로써, 보통 드로잉, 트리밍, 플랜징 및 캠/플랜징 공정을 거쳐 제품을 생산한다. 금형 공정이 이와 같이 여러 공정으로 구분되어 있기 때문에 사용되는 금형의 형상이 다양하고 형상 또한 복잡하다. 따라서 프레스 금형을 제작하는데 있어서 주조성 및 절삭성이 좋은 주철이 금형 재료로 현재 많이 사용되고 있다. | |
자동차 생산 공정에서 금형의 표면 열처리를 하는 이유는? | 따라서 프레스 금형을 제작하는데 있어서 주조성 및 절삭성이 좋은 주철이 금형 재료로 현재 많이 사용되고 있다. 또한 자동차 차체를 제작하는 과정에서 제품의 생산성 및 품질 향상을 위해 금형의 우수한 기계적 성질이 요구되고 있으며, 이를 위해 금형의 표면 열처리가 행해지고 있다. | |
프레스 금형을 사용하여 자동차 차체를 성형하는 가공공정이란? | 프레스 금형을 사용하여 자동차 차체를 성형하는 가공공정은 박판소재를 원하는 형상으로 제작하는 공정으로써, 보통 드로잉, 트리밍, 플랜징 및 캠/플랜징 공정을 거쳐 제품을 생산한다. 금형 공정이 이와 같이 여러 공정으로 구분되어 있기 때문에 사용되는 금형의 형상이 다양하고 형상 또한 복잡하다. |
Gagne, M., 2004, The Sorelmetal Book of Ductile Iron, Rio Tinto Iron & Titanium Inc.
Kang, M.S. and Park, H.S., "A Study on the Mechanical Properties of Austempered Low-Alloy Ductile Cast Iron," Trans. of the KSME, Vol. 12, No. 6, pp. 1296-1302
Smith, W.F., 1993, Structure and Properties of Engineering Alloys, McGraw-Hill, Inc.
Holmgren, D., Dioszegi, A. and Svensson, I.L., 2007, "Effects of Nodularity on Thermal Conductivity of Cast Iron," International Journal of Cast metals Research, Vol. 20, No. 1
Sandven, O. A., "Laser Surface Hardening," ASM Handbook, Vol. 4, pp. 286-295
Chen, T.L., Guan, Y.H., Wang, H.G. and Zhang, J.T., 1997, "A Study on Austenite Transformation during Laser Heating," Journal of Material Processing Technology, Vol. 63, pp. 546-549
Li, L., 2000, "The Advances and Characteristics of High Power Diode Laser Materials Processing," Optics and Laser in Engineering Vol.34, pp. 231-253
Pashby, I.R., Barnes, S. and Bryden, B.G., 2003, "Surface Hardening of Steel Using a High Power Diode Laser," Journal of Materials Processing Technology Vol. 139, pp. 585-588
Kennedy, E., Byrne, G. and Collins, D.N., 2004, "A Review of the Use of High Power Diode Lasers in Surface Hardening," Journal of Materials Processing Technology, pp. 1855-1860
Ehlers, B., Herfurth, H. and Heinemann, S., 1998, "Surface Hardening with High Power Diode Laser," ICALEO-Section G, pp. 75-84.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.