최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.48 no.6, 2011년, pp.617 - 620
Kim, Ju-Young (School of Materials Science & Engineering, Pusan National University) , Yoon, Sang-Hyeon (School of Materials Science & Engineering, Pusan National University) , Kim, Yoon-Ho (Engine Development Department Platform Development Division Technical Center, Daihatsu Motor Co., Ltd.) , Lee, Hee-Soo (School of Materials Science & Engineering, Pusan National University)
Thermal shock behavior of porous ceramic nozzles with various pore sizes for continuous casting process of steel was investigated in terms of physical properties and microstucture. Porous nozzle samples with a composition of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
G. J. Zhang, J. F. Yang, and Tatsuki Ohji, "Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores," J. Am. Ceram. Soc., 84 [6] 1395-7 (2001).
F. Tang, H. Fudouzi, T. Uchikoshi, and Y. Sakka, "Preparation of Porous Materials with Controlled Pore Size and Porosity," J. Eur. Ceram. Soc., 24 341-4 (2004).
K. Maca, P. Dobsak, and A.R. Boccaccini, "Fabrication of Graded Porous Ceramics using Alumina-carbon Powder Mixtures," Ceram. Int., 27 577-84 (2001).
O. Lyckfeldt and J. M. K. Ferreira, "Processing of Porous Ceramics by 'Starch Consolidation'," J. Eur. Ceram. Soc., 18 131-40 (1998).
C. Yuan, L. J. Vandeperre, R. J. Stearn, and W. J. Clegg, "The Effect of Porosity in Thermal Shock," J. Mater. Sci., 43 4099-106 (2008).
M. Collin and D. Rowcliffe, "Analysis and Prediction of Thermal Shock in Brittle Materials," Acta Mater., 48 1655-65 (2000).
N. M. Rendtorff, L. B. Garrido, and E. F. Aglietti, "Effect of the Addition of Mullite-zirconia to the Thermal Shock Behavior of Zircon Materials," Mater. Sci. Eng. A., 498 208-15 (2008).
T. Volkov-Husovic, R. M. Jancic, M. Cvetkovic, D. Mitrakovic, and Z. Popovic, "Thermal Shock Behavior of Alumina-Based Refractories: Fracture Resistance Parameters and Water Quench Test," Mater. Lett., 38 372-8 (1999).
J. H. She, J. F. Yang, and T. Ohji, "Thermal Shock Resistance of Porous Silicon Nitride Ceramics," J. Mater. Sci. Lett., 22 331-3 (2003).
D. P. H. Hasselman, "Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics," J. Am. Ceram. Soc., 52 [11] 600-4 (1969).
D. P. H. Hasselman and J. P. Singh, "Analysis of Thermal Stress Resistance of Microcracked Brittle Ceramics," Am. Ceram. Soc. Bull., 58 856-60 (1979).
S. H. Yoon, M. K. Cho, D. H. Jeong, and H. S. Lee, "Effect of Porosity on Durability in a Porous Nozzle for Continuous Casting (in Korean)," Kor. J. Met. Mater., 48 [7] 625-9 (2010).
Y. H. Cho, J. Y. Kim, S. H. Yoon, and H. S. Lee, "Effect of the Pore Size of Graphite on the Mechanical Properties and Permeability of a Porous Nozzle for Continuous Casting Process," Kor. J. Met. Mater., 49 [7] 530-4 (2011).
Z. Wang, C. Hong, X. Zhang, X. Sun, and J. Han, "Microstructure and Thermal Shock Behavior of $ZrB_{2}-SiC$ -graphite Composite," Mater. Chem. Phys., 113 338-41 (2009).
N. Rendtorff, L. Garrido, and E. Aglietti, "Mullite-zirconiazircon Composites: Properties and Thermal Shock Resistance," Ceram. Int., 35 779-86 (2009).
J. T. Richardson, Y. Peng, and D. Remue, "Properties of Ceramic Foam Catalyst Supports: Pressure Drop," Appl. Catal., A, 204, 19-32 (2000).
K. Ishizaki, S. Komarneni, and M. Nanko, Porous Materials, pp. 202-24, Kluwer Academic Publishers, Netherlands, 1998.
L. Shen, M. Liu, X. Liu, and B. Li, "Thermal Shock Resistance of the Porous $Al_{2}O_{3}/ZrO_{2}$ Ceramics Prepared by Gelcasting," Mater. Res. Bull., 42 2048-56 (2007).
R. W. Rice, "Comparison of Stress Concentration Versus Minimum Solid area Based Mechanical Property-porosity Relation," J. Mater. Sci., 28 2187-90 (1993).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.