최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.20 no.5, 2011년, pp.576 - 581
이승표 ((주)일진글로벌 기술연구소) , 이인하 ((주)일진글로벌 기술연구소) , 김봉철 ((주)일진글로벌 기술연구소) , 진성규 ((주)일진글로벌 기술연구소)
In this paper, deformation of dust cap in the automotive wheel bearing produced during press-fit process was numerically analyzed. The commercial software, MSC.MARC which is based on the finite element method was used to calculate the deformation. From those results, interference between dust cap an...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Hofmann, H., and Troster, M., 1988, "Progress with Car Wheel Bearing Units," Ball and Roller Bearing Engineering - Industrial Engineering published by FAG, Vol. 27, No. 2, pp. 13-15.
Hofmann, H., and Bayer, O., 1990, "ABS Wheel Bearing," Ball and Roller Bearing Engineering - Industrial Engineering published by FAG, Vol. 501, pp. 19-24.
Ouchi, H., 1996, "Hub Unit Bearing with Annular Passive Sensor," NSK Technical Journal, No. 662, pp. 1-7.
Ahn, T. K., and Lee, S. H., 2003, "Design of a Wheel Bearing Unit Using Taguchi Method," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 10, pp. 164-168.
Lee, S. P., Lee, I. H., Park, J. S., Hwang, S. H., and Park, J. Y., 2010, "Deformation Analysis for Dust Cap of Wheel Bearing," Proceedings of the Korean Society of Machine Tool Engineering spring conference, p. 60.
MARC, 2008, Volume B: Element Library Manual Version 2008 r1, MSC.Software Corporation.
I-DEAS, 2008, Finite Element Modeling User's Guide Version NX 6, Siemens Product Lifecycle Management Software Inc.
Lee, S. P., Lee, I. H., Cho, Y. G., Kim, B. C., and Koo, M. H., 2010, "Stress Analysis of Automotive Wheel Bearing Considering the Heat Treatment," Proceedings of the Korean Society of Precision Engineering spring conference, pp. 923-924.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.