최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산유체공학회지 = Journal of computational fluids engineering, v.16 no.4 = no.55, 2011년, pp.92 - 99
김선민 (인하대학교 대학원 기계공학과) , 이기돈 (인하대학교 대학원 기계공학과) , 김광용 (인하대학교 기계공학부)
In order to protect the turbine blade from working fluid of high temperature, many cooling techniques such as internal convection cooling, film cooling, impinging jet cooling and thermal barrier coating have been developed. With all other things, film-cooling has been widely used as the important al...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
가스터빈 엔진의 입구 온도를 높이는 이유는 무엇인가? | 가스터빈 엔진은 높은 열효율과 낮은 연료 소모를 위하여 터빈의 입구온도를 지속적으로 높여 왔다. 그 결과 부품에 가해지는 열적 및 기계적 하중도 함께 높아졌고, 이에 따라 효율적인 냉각 방법의 필요성이 절실하게 대두되고 있다. | |
막냉각이란 무엇인가? | 막냉각(film-cooling)은 터빈의 블레이드를 냉각하는 주요한 기술들 중의 하나이다. 막냉각은 냉각재를 뜨거운 작동기체에 노출된 블레이드 표면에 분출하여 낮은 온도의 냉각 기체가 형성한 막이 금속 표면을 보호하게 되는 기술이다. 이러한 막 냉각의 중요성으로 인해 이에 관한 많은 연구들이 지난 10-15년간 이루어져 왔다. | |
막냉각의 성능을 평가하기 위한 척도인 막냉각 효율은 무엇에 의해 결정되는가? | 막냉각의 성능을 평가하기 위하여 많은 연구자들이 사용하는 척도로 막냉각 효율(film-cooling effectiveness)이 있다. 막냉각 효율은 분사율(blowing ratio), 주유동의 난류 강도, 운동량속의 비(momentum flux ratio), 분사각(injection angle), 측면방향 확장각(diffuser angle), 그리고 막냉각 홀의 지름 등과 같은 형상 변수들에 의해 결정된다. 이렇게 막냉각 효율에 영향을 미치는 많은 요인들이 있지만 막냉각 홀의 형상은 막냉각 효율에 가장 큰 영향을 미치는 요인이다. |
2005, Bunker, R.S., "A Review of Shaped Hole Turbine Film-Cooling Technology," Journal of Heat Transfer, Vol.127, pp. 441-453.
2004, Taslim, M.E. and Ugarte, S., "Discharge Coefficient Measurements for Flow through Compound-Angle Conical Holes with Cross-Flow," The International Journal of Rotating Machinery, Vol.10, No.2, pp.145-153.
2007, Lu, Y., "Effect of Hole Configurations on Film Cooling from Cylindrical Inclined Holes for the Application to Gas Turbine Blades," Ph. D Thesis, Louisiana State University.
2003, Saumweber, C., Schulz, A. and Wittig, S., "Free-Stream Turbulence Effects on Film Cooling With Shaped Holes," Journal of Turbomachinery, Vol.125, pp.65-73
2010, Liu, J.S., Malak, M.F., Tapia L.A., Crites, D.C., Ramachadran, D., Srinivasan, B., Muthiah, G. and Venkaramanan, J., "Enhanced Film Cooling Effectiveness with New Shaped Holes," Proceedings of ASME Turbo Expo 2010, GT2010-22774.
2002, Yu, Y., Yen, C. -H., Shih, T. I. -P., Chyu, M. K. and Gogineni, S., "Film Cooling Effectiveness and Heat Transfer Coefficient Distributions Around Diffusion Shaped Holes," Journal of Heat Transfer, Vol.124, No.5, pp.820-827.
2010, Ghorab, M., Hassan, I. and Lucas T., "An Experimental Investigation of a New Hybrid Film Cooling Scheme," International Journal of Heat and Mass Transfer, Vol.53, No.21-22, pp.4994-5007.
2006, Zhang, X.Z. and Hassan, I., "Film Cooling Effectiveness of an Advanced-Louver Cooling Scheme for Gas Turbines," Journal of Thermophysics and Heat Transfer, Vol.20, No.4, pp.754-763.
2002, Sargison, J.E., Guo, S.M., Oldfield, M.L.G., Lock, G. D. and Rawlinson, A. J., "A Converging Slot-Hole Film-Cooling Geometry - Part 1: Low-Speed Flat-Plate Heat Transfer and Loss," Journal of Turbomachinery-Transactions of the ASME, Vol.124, No.3, pp.453-460.
2003, Nasir, H., Acharya, S., and Ekkad, S., "Improved film cooling from cylindrical angled holes with triangular tabs_effect of tab orientations," International Journal of heat and fluid flow, Vol.24, No.5, pp.657-668.
2009, Lu, Y., Dhungel, A., Ekkad, S.V. and Bunker, R.S., "Effect of Trench Width and Depth on Film Cooling from Cylindrical Holes Embedded in Trenches,", Journal of Turbomachinery, Vol.131, No.1, pp.1-13.
2006, CFX-11.0 Solver Theory, ANSYS Inc.
2001, Menter, F. and Esch, T., "Elements of industrial heat transfer prediction," 16th Brazilian Congress of Mechanical Engineering (COBEM), Uberlandia Brazil
1986, Wilcox, D. D., "Multiscale model for turbulent flows," AIAA 24th Aerospace Science Meeting, American Institute of Aeronautics and Astronautics.
1997, Bardina, J.E., Huang, P.G. and Coakley, T., "Turbulence Modeling Validation," Fluid Dynamics Conference 28th, AIAA pp. 1997-2121.
2010, Lee, K.D. and Kim, K.Y., "Shape Optimization of Fan-Shaped Hole to Enhance Film-Cooling Effectiveness," International Journal of Heat and Mass Transfer, Vol.53, No. 15-16, pp.2996-3005.
2011, Lee, K.D. and Kim, K.Y., "Surrogate Based on Optimization of a Laidback Fan-Shaped Hole for Film-Cooling," International Journal of Heat and Fluid Flow, Vol.32, No.1, pp.226-238.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.