최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.35 no.3 = no.306, 2011년, pp.237 - 244
An experimental study was carried out to investigate the effect of the inclination angle on the nucleate pool boiling of saturated water at atmospheric pressure. We considered an annulus with a gap of 5 mm and a bottom opening. The inner tube of the annulus was heated, and the outer diameter and the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
임계열유속은 무엇에 의해 크게 달라지는가? | 경사각이 임계열유속에 미치는 영향 역시 평판, 튜브, 제한된 공간 등의 여러 가지 기하학적형상에 대해 연구되어 왔다.(15~20) 발표된 연구 결과들에 의하면, 임계열유속은 경사각에 따라 크게 달라진다. 특히, 제한된 공간의 경우 틈새간격이 매우 중요한 변수가 됨을 확인하였다. | |
풀비등열전달에 큰 영향을 미치는 두 가지 요소는? | 풀비등열전달은 오랜 기간에 걸쳐서 연구되어왔으며, 최근 들어 신형원전개발에 적용하기 위해 광범위하게 연구되고 있다.(1,2) 기존에 발표된연구 결과들을 살펴보면 풀비등 열전달에 큰 영향을 미치는 기하학적 변수 중 두 가지는 제한된공간과 경사각을 고려하는 것이다. | |
전기적으로 가열한 튜브 표면에서의 열유속은 무엇인가? | 전기적으로 가열한 튜브 표면에서의 열유속은 공급전력을 열전달면적( )으로 나눈 것이며, 다음과 같은 식으로 계산할 수 있다. |
Shoji, M., 2004, "Studies of Boiling Chaos: a Review," Int. J. Heat Mass Transfer, Vol. 47, pp. 1105-1128.
Chun, M. H. and Kang, M. G., 1998, "Effects of Heat Exchanger Tube Parameters on Nucleate Pool Boiling Heat Transfer," ASME, J. of Heat Transfer, Vol. 120, pp. 468-476.
van Stralen, S. J. D. and Sluyter, W. M. 1969, "Investigations on the Critical Heat Flux of Pure Liquids and Mixtures under Various Conditions," Int. J. Heat Mass Transfer, Vol. 12, pp. 1353-1384.
Githinji, P. M. and Sabersky, R. H., 1963, "Some Effects of the Orientation of the Heating Surface in Nucleate Boiling'" ASME, J. of Heat Transfer, Vol. 85, p. 379.
Nishikawa, K., Fujita, Y., Uchida, S. and Ohta, H., 1984, "Effect of Surface Configuration on Nucleate Boiling Heat Transfer," Int. J. Heat Mass Transfer, Vol. 27, No. 9, pp. 1559-1571.
Lienhard, J. H., 1985, "On the Two Regimes on Nucleate Boiling," ASME J. Heat Transfer, Vol. 107, pp. 262-264.
Jung, D. S., Venant, J. E. S., and Sousa, A. C.
Fujita, Y., Ohta, H., Uchida, S., and Nishikawa,
Kang, M. G., 2000, "Effect of Tube Inclination on Pool Boiling Heat Transfer," ASME, J. of Heat Transfer, Vol. 122, Issue 1, pp. 188-192.
Kang, M. G., 2003, "Effects of Tube Inclination on Pool Boiling Heat Transfer," Nuclear Engineering and Design, Vol. 220, pp. 67-81.
Kang, M. G., 2008, "Effects of Tube Inclination on Saturated Nucleate Pool Boiling Heat Transfer," Trans. of the KSME(B), Vol. 32, No. 1, pp.116-124.
Narayan, G. P., Anoop, K. B., Sateesh G. and Das, S. K., 2008, "Effects Surface Orientation on Pool Boiling Heat Transfer on Nanoparticle Suspensions," Int. J. Multiphase Flow, Vol. 34, pp. 145-160.
Parker, J. L. and El-Genk M. S., 2006, "Effect of Surface Orientation on Nucleate Boiling of FC-72 on Porous Graphite," ASME J. Heat Transfer, Vol. 128, pp. 1159-1175.
Sateesh, G., Das, S. K. and Balakrishnan, A.
Howard, A. H. and Mudawar, I., 1999, "Orientation Effects on Pool Boiling Critical Heat Flux(CHF) and Modeling of CHF for Near-Vertical Surfaces," Int. J. Heat Mass Transfer, Vol. 42, pp. 1665-1688.
El-Genk, M. S. and Bostanci H., 2003, "Saturation Boiling of HFE-7100 from a Copper Surface, Simulating a Microelectric Chip," Int. J. Heat Mass Transfer, Vol. 46, pp. 1841-1854.
Kim, Y. H. and Suh, K. Y., 2003, "Onedimensional Critical Heat Flux Concerning Surface Orientation and Gap Size Effects," Nuclear Engineering and Design, Vol. 226, pp. 277-292.
Liu, Z. and Zhang, T., 2004, "Critical Heat Flux during Natural Convection Boiling in Inclined Annular Tubes Submerged in Saturated Liquids," Int. Comm. Heat Mass Transfer, Vol. 31, pp. 169-179.
Liu, Z., Liao, L., and Zhang, T., 2008, "Critical Heat Flux of Countercurrent Boiling in an Inclined Small Tube with Closed Bottom," Int. Comm. Heat Mass Transfer, Vol. 35, pp. 995-1000.
Misale, M., Guglielmini, G., and Priarone, A.,
Cornwell, K. and Houston, S. D., 1994, "Nucleate Pool Boiling on Horizontal Tubes: a Convection-Based Correlation," Int. J. Heat Mass Transfer, Vol. 37, Suppl. 1, pp. 303-309.
Kang, M. G., 2008, "Effects of the Inclination Angle on Pool Boiling in an Annulus," Int. J. Heat Mass Transfer, Vol. 51, pp. 5018-5023.
Kang, M. G., 2010, "Pool Boiling Heat Transfer on the Tube Surface in an Inclined Annulus," Int. J. Heat Mass Transfer, Vol. 53, pp. 3326-3334.
Coleman, H. W. and Steele, W. G. 1999, Experimentation and Uncertainty Analysis for Engineers, 2nd Ed., John Wiley&Sons.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.