최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국가스학회지 = Journal of the Korean institute of gas, v.15 no.4, 2011년, pp.44 - 50
Explosion limit is one of the major combustion properties used to determine the fire and explosion hazards of the flammable substances. In this study, the lower explosion limit(LEL) and upper explosion limit(UEL) of ethers were predicted by using the heat of combustion and stoichiometric coefficient...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폭발한계란 무엇인가? | 폭발한계는 가연성물질의 화재 및 폭발위험성을 결정하는데 주요한 특성치 가운데 하나이다. 본 연구에서, 에테르류의 폭발하한계와 상한계에 대해 연소열과 화학양론계수를 이용하여 예측하였다. | |
이론을 이용한 예측식으로 가연성물질의 위험성 예측이 타당성이 있는 이유는 무엇인가? | 산업안전 및 손실예방의 중요성을 인식하면, 완전하지 않은 예측식을 사용하기보다는 실험에 의해 확인하는 것이 바람직하나, 부득이 하게 실험하기 어려운 가연성물질인 경우 예측식을 사용하여 안전을 확보할 수밖에 없다. 따라서 경우에 따라서 이론을 이용한 예측식으로 가연성물질의 위험성 예측은 타당성이 있다. | |
취급물질의 연소 특성치 파악이 필요한 이유는 무엇인가? | 공정에서 가연성물질을 취급함에 있어 밸브의 조작실수, 배관접합부파손 등으로 인해 주위의 공기와 혼합되면 화재 및 폭발이 발생할 수도 있으며, 또한 유해물질이 유출되는 경우도 있다. 산업현장에서 화재 및 폭발의 위험을 최소화하기 위해서는 공정의 안전과 최적화 조작이 이루어 져야 하는데, 이를 위해 우선 작업 조건하에서 취급물질의 연소 특성치 파악이 필요하다[1]. |
Lees, F.P., Loss Prevention in the Process Industries Vol. 1, 2nd ed., Oxford Butterworth-Heinemann, (1996)
Meyer, E., Chemistry of Hazardous Materials, 2nd ed., Prentice-Hall, (1990)
Ha, D.M., "Estimation of Explosion Limits by Using Heat of Combustion for Esters", T. of Korean Institute of Fire Sci. & Eng., 24(30, 66-71, (2010)
Lenga, R.E. and K.L. Votoupal, The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III, Sigma Chemical Company and Aldrich Chemical Company Inc., (1993)
NFPA, Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids, NFPA 325M, NFPA, (1991)
Kanury, A.M., SFPE Handbook of Fire Protection Engineering ; Ignition of Liquid Fuels, 2nd ed., SFPE, (1995)
Perry, R.H. and G.W. Green, Perry's Chemical Engineers' Handbook, 7th ed., MaGraw-Hill, New York, (1997)
Lide, D.R., Handbook of Chemistry and Physics, 76th ed., CRC Press, Boca Raton, (1995)
Cardozo, R.D., "Prediction of the Enthalpy of Combustion of Organic Compounds", AIChE Journal, 32(5), 844-847, (1986)
Drysdale, D., An Introtduction to Fire Dynamics, John Wiley and Sons, (1985)
Suzuki, T., "Empirical Relationship Between Lower Flammability Limits and Standard Enthalpies of Combustion of Organic Compounds", Fire and Materials, 18, 333-336, (1994)
Hanley, B.F., "A Model for the Calculation and the Verification of Closed Flash Points Multicomponent Mixtures", Process Safety Progress, 17(2), .86-97, (1998)
Hshieh, F-Y., "Predicting Heats of Combustion and Lower Flammability Limits of Organosilicon Compounds", Fire and Materials, 23, 79-89, (1999)
Jones, G.W., "Inflammation Limits and Their Practical Application in Hazardous Industrial Operation", Chem. Rev., 22(.1), 1-26, (1938).
Hilado, C.J., "A Method for Estimating Limits of Flammability", J. of Fire and Flammability, 6, 130-139, (1975)
Jones, J.C., "Reid Vapour Pressure as a Route to Calculating the Flash Points of Petroleum Fractions", J. of Fire Sciences, 16(3), 222-227, (1998)
Mullins, B.P., Bubble-points, Flammability-limits and Flash-points of Petroleum Products, Combustion Researches and Reviews, Butterworths, London, (1957)
Pintar, A.J., "Predicting Lower and Upper Flammability Limits", Proc. Ind. Conf. on Fire Safety, 28, Product Safety Corp., Sissonville WV, (1999)
Zabetakis, G.M., Flammability Characteristics of Combustible Gases and Vapors, US Bureau of Mines, Bulletin, (1965)
Box, G.E.P. and N.R. Draper, Empirical Model- Building and Response Surface, John Wiley and Sons, Inc., (1987)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.