최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.12 no.1, 2011년, pp.45 - 54
김수현 (유한대학교 기계설계학과) , 이정익 (인하공업전문대학 기계공학부) , 이동연 (영남대학교 기계공학부) , 이무연 (자동차부품연구원 열제어연구센터)
This paper discuss about structure modification method of the reciprocating compressor to reduce its vibration and noise in small refrigeration system. The structure modification is applied using analytic FE models and then applying suggested Component Mode Synthesis(CMS) algorithms. The efficient C...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
부분 구조 합성법이란 무엇입니까? | 1960년도부터 자동차와 항공기 산업 분야에서 크고 복잡한 구조물의 동적 해석을 위해 부분 모드 합성법 (component mode synthesis)이 개발되었다. 부분 구조 합성법은 2 개 이상의 부분 구조물을 개별적으로 분석한 후 분석된 결과를 이용하여, 합성된 전체 구조물의 동특성을 예측하고자 하는 방법이다. 부분 구조물의 모드인 정규모드(normal mode), 강체 모드(rigid body mode), 구속 모드(constraint mode)와 부착 모드(attachment mode) 등이 부분 구조물 합성 시 고려되었고, 이러한 모드들을 이용 하여 합성한 결과의 오차 보상을 위해서 잔여 유연도 (residual flexibility), 부가 질량 법(mass loading technique) 이 개발되었다. | |
모드 합성 방법은 크게 공간 모델, 모드 모델, 응답 모델로 분류되는데 각각은 무엇을 의미합니까? | 모드 합성 방법은 크게 공간 모델, 모드 모델, 응답 모델로 분류된다. 공간 모델은 질량, 강성, 감쇠 행렬의 직접적인 대수 연산을 통해 공간 모델이 합성되고 합성된 후의 고유치 문제(eigen problem)를 풀어 합성된 구조물의 모드 변수를 구하게 되며, 응답 모델은 모델의 FRF 데이터로부터 합성된 FRF 정보를 얻고 이로부터 모드 변수를 추출해 낸다. 모드 모델은 해석 또는 실험에서 얻어진 모드 변수를 가지고 Ritz 이론을 통한 좌표 변환 과정을 통해 축약된 질량, 강성 행렬을 얻은 후 새로운 시스템의 고유치 문제를 풀어 합성된 구조물의 모드 변수를 구하게 된다. | |
부분 구조물의 모드로는 어떠한 것들이 있습니까? | 부분 구조 합성법은 2 개 이상의 부분 구조물을 개별적으로 분석한 후 분석된 결과를 이용하여, 합성된 전체 구조물의 동특성을 예측하고자 하는 방법이다. 부분 구조물의 모드인 정규모드(normal mode), 강체 모드(rigid body mode), 구속 모드(constraint mode)와 부착 모드(attachment mode) 등이 부분 구조물 합성 시 고려되었고, 이러한 모드들을 이용 하여 합성한 결과의 오차 보상을 위해서 잔여 유연도 (residual flexibility), 부가 질량 법(mass loading technique) 이 개발되었다. |
R. R. Craig, C. Mervyn, and C. C. Bampton, "Coupling of Substructures for Dynamic Analysis", AIAA Vol. 6, No. 7, 1968.
Benfield, and Hruda, "Vibration Analysis of Substructures by Component Mode Substitution", AIAA, Vol. 9, No. 7, pp. 1255-1251, 1971.
E. H. Dowell, "Free Vibrations of an Arbitrary Structure in terms of Component Mode", Journal of Applied Mechanics, september, 1972.
W. H. Chen, and J. S. Cherng, "Modal Synthesis via Combined Experimental and Finite Element Techniques with Consideration of Rotational Effects", Journal of Sound and Vibration, Vol. 103, No. 1, 1985.
J. H. Kuang, and Y. G. Tsuei, "A More General Method of Substructure Mode Synthesis for Dynamic Analysis", AIAA, 1985.
N. Neibal, "Experimental System Identification for Experimental/analytical Correction and Modeling", ASME, Vo. l67, 1985.
Kenneth W. Gwinn, James P. Lauffer, A. Keith, Miller, "Component Mode Synthesis using Experimental Modes Enhanced by Mass Loading", IMAC, 1992.
L. E. Suarez, and E. E. Matheu, "A Modal Synthesis Technique Based on the Force Derivative Method", Journal of Vibration and Acoustics, Vol. 114, 1992.
R. C. Engels, "Convergence Improvement for Component Mode Synthesis," AIAA, Vol. 30, No. 2, 1992.
G. Z. Matthew, P. Castanier, and C. Pierr, "Efficient Component Mode Synthesis with a New Interface Reduction Method", IMAC, 2001
K. F. Alvin, L. D. Peterson, and K. C. Park, "Minimal Order Experimental Component Mode Synthesis: New results and challenges", AIAA, Vol. 33, No. 8, 1995.
K. Wyckaert, K. Q. Xu, and P. Mas, "The Virtures of Static and Dynamic Compensations for FRF based Substructuring", IMAC, 1996.
J. A. Morgan, C. Pierre, and G. M. Hulbert, "Calculation of Component Mode Synthesis Matrices from Measured Frequency Response Function, Part1:Theory", Journal of Vibration and Acoustics, ASME, Vol. 120, 1998.
J. A. Morgan, C. Pierre, and G. M. Hulbert, "Calculation of Component Mode Synthesis Matrices from Measured Frequency Response function, Part2: Application", Journal of Vibration and Acoustics, Vol. 120, 1998.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.