최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.23 no.12, 2011년, pp.821 - 827
김동선 (충주대학교 기계공학과) , 최영돈 (고려대학교 기계공학과) , 이대영
A simple analytical model has been developed from the approximate solution of the governing equations for desiccant wheels. The model has been compared with a numerical twodimensional transient model and found capable of making realistic prediction. The analytical model will be further developed to ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
제습냉방기의 성능은 무엇에 크게 좌우되는가? | 제습제를 통과시켜 만든 건조한 공기를 물과 직접 접촉시켜 낮은 포화온도에서 물이 증발하게 함으 로써 온도를 낮추는 냉방기술을 통틀어 제습냉방이라 부른다. 제습냉방기의 성능은 제습제 및 제습 사이클의 설계에 크게 좌우되며 과거로부터 흡수성이 강한 다양한 액상 또는 고상의 제습제와 그 운용에 관한 여러 가지 아이디어들이 연구되어 왔다. (1, 2) | |
제습냉방이란? | 제습제를 통과시켜 만든 건조한 공기를 물과 직접 접촉시켜 낮은 포화온도에서 물이 증발하게 함으 로써 온도를 낮추는 냉방기술을 통틀어 제습냉방이라 부른다. 제습냉방기의 성능은 제습제 및 제습 사이클의 설계에 크게 좌우되며 과거로부터 흡수성이 강한 다양한 액상 또는 고상의 제습제와 그 운용에 관한 여러 가지 아이디어들이 연구되어 왔다. |
Daou, K., Wang, R. Z., and Xia, Z. Z., 2006, Desiccant cooling air conditioning:a review, Renew. Sust. Energ. Rev., Vol. 10, pp. 55-77.
Parmar, H. and Hindoliya, H. A., 2011, Desiccant Cooling System for Thermal Comfort:A Review, Int. J. Eng. Sci. Tech., Vol. 3, pp. 4218- 4227.
Majumdar, P., 1998, Heat and mass transfer in composite pore structures for dehumidification, Solar Energy, Vol. 62, pp. 1-10.
Zhang, L. Z. and Niu, J. L., 2002, Performance comparisons of desiccant of desiccant wheels for air dehumidification and enthalpy recovery, Appl. Therm. Eng., Vol. 22, pp. 1347-1367.
Zhang, X. J., Dai, Y. J., and Wang, R. Z., 2003, A simulation study of heat and mass transfer in a honeycomb rotary desiccant dehumidifier, Appl. Therm. Eng., Vol. 23, pp. 989-1003.
Sphaier, L. A. and Worek, W. M., 2004, Analysis of heat and mass transfer in porous sorbents used in rotary regenerators, Int. J. Heat Mass Tran., Vol. 47, pp. 3415-3430.
Ruivo, C. R., Costa, J. J., and Figueiredo, A. R., 2007, On the behaviour of hygroscopic wheels:Part I-channel modelling, Int. J. Heat Mass Tran., Vol. 50, pp. 4812-4822.
Chung, J. D. and Lee, D. Y., 2009, Effect of desiccant isotherm on the performance of desiccant wheel, Int. J. Refrig., Vol. 32, pp. 720-726.
Van Den Bulck, E., Mitchell, J. W., and Klein, S. A., 1985, Design theory for rotary heat and mass exchangers-I. Wave analysis of rotary heat and mass exchangers with infinite transfer coefficients, Int. J. Heat Mass Tran., Vol. 28, pp. 1575-1586.
Van Den Bulck, E., Mitchell, J. W., Klein, S. A., 1985, Design theory for rotary heat and mass exchangers-II. Effectiveness number of transfer units method for rotary heat and mass exchangers, Int. J. Heat Mass Tran., Vol. 28, pp. 1587-1595.
Simonson, C. J. and Besant, R. W., 1999, Energy wheel efectiveness:part I-development of dimensionless groups, Int. J. Heat Mass Tran., Vol. 42, pp. 2161-2170.
Simonson, C. J. and Besant, R. W., 1999, Energy wheel efectiveness:part II-correlations, Int. J. Heat Mass Tran., Vol. 42, pp. 2171-2185.
Sphaier, L. A. and Worek, W. M., 2009, Parametric analysis of heat and mass transfer regenerators using a generalized effectiveness- NTU method, Int. J. Heat Mass Tran., Vol. 52, pp. 2265-2272.
Brillhart, P. L., 1997, Evaluation of desiccant rotor matrices using an advanced fixed-bed test system, Ph. D. thesis, University of Illinois at Chicago, USA.
Lee, G., Lee, D. Y., and Kim, M. S., 2004, Development of a linearized model and verification of the exact solution for the analysis of a desiccant dehumidifier, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 16, No. 9, pp. 811-819.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.