최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기유체기계저널 = Journal of fluid machinery, v.14 no.1 = no.64, 2011년, pp.48 - 54
김선웅 (금오공과대학교 기계공학부 대학원) , 이상우 (금오공과대학교 기계공학부)
The effect of channel cutback on three-dimensional flow fields and aerodynamic losses downstream of a cavity squealer tip has been investigated in a turbine rotor cascade for the squealer rim height-to-chord ratio and tip gap height-to-chord ratio of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
가스터빈 엔진에서 터빈 동익의 경우 무엇이 존재하는가? | 가스터빈 엔진에서 터빈의 효율은 각 터빈 단(stage)에서의 압력손실과 밀접한 관련이 있다. 터빈 동익의 경우, 회전 하는 익형 팁(tip)과 케이싱(casing) 사이에 팁간극(tip gap) 이 존재한다. 이 팁간극을 통하여 익형의 압력면(pressure surface)에서 흡입면(suction surface) 쪽으로 이동하는 유동이 발생하는데, 이 유동을 팁누설유동(tip leakage flow) 라고 한다. | |
팁누설유동이란 무엇인가? | 가스터빈 엔진에서 터빈의 효율은 각 터빈 단(stage)에서의 압력손실과 밀접한 관련이 있다. 터빈 동익의 경우, 회전 하는 익형 팁(tip)과 케이싱(casing) 사이에 팁간극(tip gap) 이 존재한다. 이 팁간극을 통하여 익형의 압력면(pressure surface)에서 흡입면(suction surface) 쪽으로 이동하는 유동이 발생하는데, 이 유동을 팁누설유동(tip leakage flow) 라고 한다. | |
익렬 풍동은 무엇으로 구성되는가? | 본 연구에서 사용된 익렬 풍동(cascade wind tunnel)은 개방형 풍동, 입구덕트, 터빈 익렬, 출구덕트 등으로 구성된다(Fig. 3). |
Cohen, H., Rogers, G. F. C., and Saravanamuttoo, H.I. H., 1996, Gas Turbine Theory, Longman GroupLimited, Essex.
Bindon, J. P., 1989, “The Measurement and Formationof Tip Clearance,” ASME Journal of Turbomachinery,Vol. 111, pp. 257-263.
Yamamoto, A., 1989, “Endwall Flow/Loss Mechansmin a Linear Turbine Cascade With Vlade Tip Clearance,”ASME Journal of Turbomachinery, Vol. 111, pp.264-275.
Lee, S. W., Moon, H. S., and Lee, S. E., 2009, “TipGap Height Effects on Flow Structure and Heat/MassTransfer over Plane Tip of a High-Turning TurbineRotor Blade,” International Journal of Heat and FluidFlow, Vol. 30, pp. 198-210.
Key, N., and Arts, T., 2006, “Comparison of TurbineTip Leakage Flow for Flat Tip and Squealer TipGeometries at High Speed Conditions,” ASME Journalof Turbomachinery, Vol. 128, pp. 213-220.
Lee, S. W. and Chae, B. J., 2008, “Effects of SquealerRim Height on Aerodynamic Losses Downstream of aHigh-Turning Turbine Rotor Blade,” ExperimentalThermal and Fluid Science, Vol. 32, pp. 1440-1447.
Lee, S. W. and Kim, S. U., 2010, “Tip Gap Height Effects on the Aerodynamic Performance of CavitySquealer Tip in a Turbine Cascade in Comparisonwith Plane Tip Results-Part 1: Tip Gap Flow Structure,”Experiments in Fluids, Vol. 49, pp. 1039-1051.
Lee, S. W. and Choi, M. Y., 2010, “Tip Gap HeightEffects on the Aerodynamic Performance of CavitySquealer Tip in a Turbine Cascade in Comparisonwith Plane Tip Results-Part 2: Aerodynamic Losses,”Experiments in Fluids, Vol. 49, pp. 713-723.
Lee, S. E., Lee, S. W., and Kwak, H. S., 2011, “TipLeakage Aerodynamics over Stepped Squealer Tips in aTurbine Cascade,” Experimental Thermal and FluidScience, Vol. 35, pp. 135-145.
Mhetras, S., Narzary, D., Gao, Z., and Han, J-C, 2008,“Effect of a Cutback Squealer and Cavity Depth onFilm-Cooling Effectiveness on a Gas Turbine BladeTip,” ASME Journal of Turbomachinery, Vol. 130, pp.021002-1-021002-13.
Treaster, A. L. and Yocum, A. M., 1979, “The Calibration and Application of Five-Hole probes,” ISATransactions, Vol. 18, pp. 23-34.
Lee, S. W. and Yoon, T. J., 1999, “An Investigation ofWall-Proximity Effect Using a Typical Large-ScaleFive-Hole Probe,” KSME International Journal, Vol.13, pp. 273-285.
Abernethy, R. B., Benedict, R. B., and Dowdell, R. B.,1985, “ASME Measurement Uncertainty,” ASMEJournal of Fluids Engineering, Vol. 107, pp. 161-164.
Lee, S. W., and Park, J. J., 2009, “Effects of IncidenceAngle on Endwall Convective Transport Within aHigh-Turning Turbine Rotor Passage,” InternationalJournal of Heat and Mass Transfer, Vol. 52, pp.5922-5931.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.