최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.23 no.3, 2011년, pp.223 - 230
김경훈 (금오공과대학교 기계공학부)
The power cycle using ammonia-water mixture as a working fluid is a possible way to improve efficiency of the system of low-temperature source. In this work thermodynamic performance of the ammonia-water regenerative Rankine cycle with partial-boiling flow is analyzed for purpose of extracting maxim...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
암모니아-물 동력 시스템의 장점은 무엇인가? | 암모니아-물 동력 시스템은 비등점을 물보다 낮출 수 있기 때문에 수증기를 발생시킬 정도로 온도가 높지 않은 폐열도 효과적으로 활용할 수 있으며 터빈 입구 압력을 낮추고 작동유체의 순환 유량도 줄일 수 있어 운전 경비를 절감할 수 있다. 게다가 혼합물은 순수 물과 분자량이 비슷하기 때문에 증기터빈을 그대로 사용할 수 있으며 산업체에서 쓰이는 다른 혼합물들에 비해 환경에 미치는 영향이 작은 등 많은 장점을 가지고 있기 때문에 최근 들어 다양한 분야로 응용범위를 넓혀가고 있으며 활발히 연구되고 있다.(3-7) | |
비공비 혼합물을 작동유체로 사용하면 일정한 압렵이 유지되는 동안에도 무엇을 시킬수 있는가? | 작동유체로 비공비 혼합물을 사용하면 일정한 압력이 유지되는 동안에도 온도가 변화하는 상태에서 열전달을 시킬 수 있다. 이렇게 온도가 변화하면서 열전달되는 과정은 열교환기 내에서 고온과 저온 흐름에서의 불균형을 줄여주기 때문에 특히 현열형태의 저온 열원을 이용한 동력 사이클에 효율적이다. | |
암모니아-물 열동력의 해석을 위해 필요한 열역학적 상태량 계산에는 어떤 계열이 주류를 이루는가? | 이러한 암모니아-물 열동력의 해석을 위해서는 암모니아-물 흡수냉동의 영역보다 높은 온도와 압력에서의 열역학적 상태량 계산이 필요하다. 암모니아-물 혼합물의 열역학적 물성치 계산방식으로는 3차 방정식 계열(8)과 과잉깁스에너지를 생성함수로 사용하는 계열(9)이 주류를 이루고 있으며 이에 대한 연구도 활발히 진행되고 있다. |
Prisyazhniuk, V. A., 2008, Alternative trends in development of thermal power plant, Applied Thermal Engineering, Vol. 28, pp. 190-194.
Kim, K. H., Kim, S. W. and Ko, H. J., 2010, Study on the Rankine cycle using ammoniawater mixture as working fluid for use of lowtemperature waste heat, Trans. Korean Hydrogen and New Energy, Vol. 21, pp. 570-579(Korean).
Ibrahim, O. M., 1996, Design consideration for ammonia-water Rankine cycle, Energy, Vol. 21, pp. 835-841.
Zamfirescu, C., Dincer, I., 2008, Thermo-dynamic analysis of a novel ammonia-water trilateral Rankine cycle, Thermo-chemica Acta, Vol. 477, pp. 7-15.
Roy, P., Desilets, M., Galanis, N., Nesreddine, H., and Cayer, E., 2010, Thermo-dynamic analysis of a power cycle using a low-temperature source and a binary NH3-H2O mixture as working fluid, Int. J. Thermal Sci., Vol. 49, pp. 48-58.
Lolos, P. A. and Rogdakis, E. D., 2009, A Kalina power cycle driven by renewable energy sources, Energy, Vol. 34, pp. 457-464.
Ogriseck, S., 2009, Integration of Kalina cycle in a combined heat and power plant, a case study, Applied Ther. Eng., Vol. 29, pp. 2843-2848.
Yang, T., Chen, G. J., Yan, W., and Guo, T. M., 1997, Extension of the Wong-Sandler mixing rule to the three-parameter Patel-teja equation of stste : Application up to the nearcritical region, Chem. Eng. J., Vol. 67, pp. 27-36.
Xu, F. and Goswami, D. Y., 1999, Thermodynamic properties of ammonia-water mixtures for power-cycle application, Energy, Vol. 24, pp. 525-536.
Smith, J. M., Van Ness, H. C. and Abbott, M. M., 2005, Introduction to chemical engineering thermodynamics, 7th Ed., McGraw-Hill.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.