최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of precision engineering and manufacturing, v.12 no.2, 2011년, pp.195 - 201
Chung, Do-Kwan (School of Mechanical and Aerospace Engineering, Seoul National University) , Shin, Hong-Shik (School of Mechanical and Aerospace Engineering, Seoul National University) , Park, Min-Soo (Department of Product Design and Manufacturing Eng., Seoul National University of Science and Technology) , Chu, Chong-Nam (School of Mechanical and Aerospace Engineering, Seoul National University)
Micro EDM using conventional pulse generators such as the RC type or transistor type with water as the dielectric fluid suffers from poor accuracy of machined structures due to electrolytic corrosion. In this study, a new high frequency bipolar pulse generator for micro EDM in water was developed in...
J. Micromech. Microeng. B. H. Kim 15 1 124 2005 10.1088/0960-1317/15/1/019 Kim, B. H., Ryu, S. H., Choi, D. K. and Chu, C. N., “Micro electrochemical milling,” J. Micromech. Microeng., Vol. 15, No. 1, pp. 124-129, 2005.
Shin, H. S., Kim, B. H. and Chu, C. N., “Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses,” J. Micromech. Microeng., Vol. 18, No. 7, Paper No. 075009, 2008.
J. Micromech. Microeng. D. K. Chung 17 5 867 2007 10.1088/0960-1317/17/5/004 Chung, D. K., Kim, B. H. and Chu, C. N., “Micro electrical discharge milling using deionized water as a dielectric fluid,” J. Micromech. Microeng., Vol. 17, No. 5, pp. 867-874, 2007.
Int. J. Precis. Eng. Manuf. M. P. Jahan 9 4 3 2008 Jahan, M. P., Wong, Y. S. and Rahman, M., “A Comparative Study of Transistor and RC Pulse Generators for Micro-EDM of Tungsten Carbide,” Int. J. Precis. Eng. Manuf., Vol. 9, No. 4, pp. 3-10, 2008.
J. Micromech. Microeng. Y. S. Liao 15 2 245 2005 10.1088/0960-1317/15/2/001 Liao, Y. S., Chen, S. T. and Lin, C. S., “Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts,” J. Micromech. Microeng., Vol. 15, No. 2, pp. 245-253, 2005.
CIRP Annals - Manufacturing Technology K. P. Rajurkar 55 2 643 2006 10.1016/j.cirp.2006.10.002 Rajurkar, K. P., Levy, G., Malshe, A., Sundaram, M. M., McGeough, J., Hu, X., Resnick, R. and DeSilva, A., “Micro and nano machining by electro-physical and chemical processes,” CIRP Annals - Manufacturing Technology, Vol. 55, No. 2, pp. 643-666, 2006.
Chung, D. K., Shin, H. S., Kim, B. H., Park, M. S. and Chu, C. N., “Surface finishing of micro-EDM holes using deionized water,” J. Micromech. Microeng., Vol. 19, No. 4, Paper No. 045025, 2009.
Yamamoto, M. and Magara, T., “Power supply unit electric discharge machining apparatus,” US Patent, No. 5064984, 1991.
Balleys, F., “Process and device for machining by electroerosion,” US Patent, No. 6465754 B1, 2002.
Nakashima, T., Hattori, K., Ukai, Y., Taneda, A., Goto, A. and Hashimoto, T., “Power supply unit for wire electrical discharge machining and method of wire electrical discharge machining,” US Patent, No. 6930273 B2, 2005.
Goto, A., Hattori, K. and Nakamura, K., “Wire electrical discharge machining apparatus,” US Patent, No. 7038158 B2, 2006.
Song, K. Y., Chung, D. K., Park, M. S. and Chu, C. N., “Micro electrical discharge drilling of tungsten carbide using deionized water,” J. Micromech. Microeng., Vol. 19, No. 4, Paper No. 045006, 2009.
Dorf, R. C. and Svoboda, J. A., “Introduction to electric circuits, 5th edition,” John Wiley & Sons, pp. 378-389, 2001.
J. Mater. Process. Technol. E. Uhlmann 167 2-3 488 2005 10.1016/j.jmatprotec.2005.06.013 Uhlmann, E., Piltz, S. and Doll, U., “Machining of micro/miniature dies and moulds by electrical discharge machining-recent development,” J. Mater. Process. Technol., Vol. 167, No. 2-3, pp. 488-493, 2005.
Cho, P. J., “Characteristics of RC circuit with transistor in micro-EDM,” Ph.D. Dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.