최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기콘크리트학회논문집 = Journal of the Korea Concrete Institute, v.23 no.3, 2011년, pp.289 - 294
이수진 (건국대학교 사회환경시스템공학과) , 이회근 (삼성물산(주) 건설부문 기술연구센터 기반기술연구소) , 이승훈 (삼성물산(주) 건설부문 기술연구센터 기반기술연구소) , 원종필 (건국대학교 사회환경시스템공학과)
The installation of joint is to prevent random cracking due to drying shrinkage stress of concrete slab. However contraction joint spacing is empirically implemented into slab constructions without detail calculation based on quantitative criteria. In this study, shrinkage strain of concrete due to ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
콘크리트 구조물에 발생하는 균열의 내부 요인에는 무엇이 있는가? | 콘크리트 구조물에 발생하는 균열의 내부 요인은 건조 수축, 수화열, 이상 응결, 알칼리-골재 반응 등이고 외부 요인은 과 하중, 외부의 온도 변화, 동결 융해, 부등 침하 등이 있다. 이와 같은 균열 발생 요인 중 건조수축이나 온도 변화에 의한 균열 발생은 전체 균열의 90%이상을 차지하고 있다. | |
콘크리트 슬래브는 언제부터 건조되기 시작하는가? | 콘크리트 슬래브는 타설 후 외부와 접하면서 건조되기 시작한다. 건조가 시작된 외부의 콘크리트는 수축하는 반면 그 내부는 수분을 가지고 있어 외부의 수축 작용을 구속하게 된다. | |
수축 거동을 미리 파악하여 이로 인한 균열을 방지하는 것이 콘크리트 구조물의 건조수축을 예측하는 가장 큰 목적인 이유는 무엇인가? | 콘크리트 구조물에 발생하는 균열의 내부 요인은 건조 수축, 수화열, 이상 응결, 알칼리-골재 반응 등이고 외부 요인은 과 하중, 외부의 온도 변화, 동결 융해, 부등 침하 등이 있다. 이와 같은 균열 발생 요인 중 건조수축이나 온도 변화에 의한 균열 발생은 전체 균열의 90%이상을 차지하고 있다. 따라서 콘크리트 구조물의 건조수축을 예측하는 가장 큰 목적은 수축 거동을 미리 파악하여 이로 인한 균열을 방지하기 위함이다. |
한국콘크리트학회, 최신콘크리트공학, 기문당, 2005, 844 pp.
이홍재, "팽창줄눈 간격의 이론적 산정," 중앙대학교 건설대학원 석사논문, 1999.
한국콘크리트학회, 콘크리트구조설계기준 해설, 기문당, 2008, 523 pp.
한국도로공사, 도로설계요령, 2002.
국토해양부, 도로설계편람, 2000.
ACI 224.3R-95, Joints in Concrete Construction, American Concrete Institute, ACI Committee 224, pp. 2-3.
ACI 360R-06, Design of Slabs-on-Ground, ACI Committee 360, pp. 23-28.
ACPA, Design and Construction of Joints for Concrete Streets, American Concrete Pavement Association, 1992, IS061.01P, pp. 1-12.
ACI 302.1R-96, Guide for Concrete Floor and Slab Construction, ACI Committee 302, 10 pp.
Bogemconcrete.com/Concrete-tips, Concrete Parking Area Construction.
Bazant Z. P., "Prediction of Concrete Creep and Shrinkage: Past, Present and Future," Nuclear Engineering and Design, Vol. 203, 2001, pp. 27-38.
ACI 209R-92, Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structure, American Concrete Institute, ACI Committee 209, 6 pp.
CEB-FIP Model Code 1990, Comite Euro International Du Beton, 1991, 57 pp.
Bazant, Z. P. and Kim, J. K., "Improved Prediction Model for Time-Dependent Deformations of Concrete : Part 1-Shrinkage," Materials and Structures, Vol. 24, 1991, pp. 327-345.
Gardner, N. J. and Lockman, M. J., "Design Provisions for Drying Shrinkage and Creep of Normal Strength Concrete," ACI Materials Journal, Vol. 98, No. 2, 2001, pp. 159-167.
Sakata, K., "Prediction of Concrete Creep and Shrinkage, Creep and Shrinkage of Concrete," Proceedings of the 5th International RILEM Symposium, London, UK, 1993, pp. 649-654.
ACI 209.2R-08, Guide for Modeling and Calculating Shrinkage Shrinkage and Creep in Hardened Concrete, ACI Committee 209, 16 pp.
McDonald, D. B. and Roper, H., Accuracy of Prediction Model for Shrinkage of Concrete, ACI Material Journal, Vol. 90, 1993, pp. 265-271.
Akthem, Al-M. and Lam, J. P., "Statistical Evaluation of Shrinkage and Creep Models," ACI Material Journal, Vol. 102, No. 3, 2005, pp. 170-176.
전쌍순, 박태균, 황택진, 엄장섭, 진치섭, "콘크리트 크리 프와 건조수축의 CEB-FIP 모델코드와 ACI 코드의 비교," 부산대학교 생산기술연구소논문집, 61권, 2002, pp. 63-73.
Bazant, Z. P. and Li, G. H., "Unbiased Statistical Comparison of Creep and Shrinkage Prediction Models," ACI Material Journal, Vol. 105, No. 6, 2008, pp. 610-622.
ACI 308-81, Standard Practice for Curing Concrete, ACI Manual of Concrete Practice, Part 2, ACI Committee 308, 2001.
Bazant, Z. P. and Xi, Y., "New Test Method to Separate Microcracking from Drying Creep: Curvature Creep at Equal Bending Moment and Various Axial Forces, Creep and Shrinkage of Concrete," Proceeding of the Fifth International RILEM Symposium, 1993, pp. 77-82.
Miltenberger, M. A. and Attiogbe, E. K., "Shrinkage-Based Analysis for Control Joint Spacing in Slab on Ground," ACI Structural Journal, Vol. 99, No. 3, 2002, pp. 352-359.
Tarr, S. M. and Farny, J. A., Concrete Floors on Ground, Portland Cement Association, 4th Edition, 2008, pp. 91-109.
Merril, W. S., "Prevention and Control of Cracking in Reinforced Concrete Building," Engineering News-Record, Vol. 131, No. 23, 1943, pp. 91-93.
Fintel, M., Joints in Building, Handbook of Concrete Engineering, New York, Van Nostrand Reinhold Company, 1974, pp. 94-110.
Wood, R. H., "Joints in Sanitary Engineering Structures," Concrete International, Vol. 3, No. 4, 1981, pp. 53-66.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.