최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.21 no.7, 2011년, pp.665 - 673
신동호 (경기대학교 대학원 기계공학과) , 김상호 (세종공업(주) 기술연구소) , 윤형호 (세종공업(주) 기술연구소) , 임희곤 (세종공업(주) 기술연구소) , 오재응 (한양대학교 기계공학부) , 이정윤 (경기대학교 기계시스템공학과)
Simplified formulae for axial and bending natural frequencies of a bellows are developed using an equivalent thin-walled pipe model. The axial and bending stiffness of bellows is determined using lumped transfer matrix method. Transfer matrix method which includes the rotary inertia is used to calcu...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
자동차 배기계에서 벨로스의 역할은? | 이러한 진동이 발생하면 구조물의 변형이나 파손이 발생하므로 이를 방지하기위해 벨로스(bellows)가 많이 사용되고 있다. 특히 자동차 배기계에서 벨로스는 엔진에서 발생되는 종진동 및 횡진동과 노면으로 부터 들어오는 진동을 흡수하여 배기계의 내구성과 승차감을 향상시키는 역할을 한다. | |
벨로스의 구조는? | 벨로스는 원통셸, 토로이달 셸(toroidal shell)로 이루어진 파형(corrugation)이 연속적으로 연결된 구조이다. 자동차 엔진 및 노면으로부터 오는 진동이 배기계로 전달되는 것을 감소시키기 위해서는 벨로스의 동특성 해석이 매우 중요하다. | |
벨로스의 모델을 단순하게 하여 동특성을 신속히 예측하는 방법에 대한 설명은? | 벨로스는 신차 모델 개발 시 이에 적합한 모델을 신속히 개발 하여야 하기 때문에 제품 개발의 시간이 매우 짧게 되어 벨로스의 모델을 단순하게 하여 동특성을 신속히 예측하는 방법이 필요하게 되었다. 이를 위해 EJMA(expansion joint manufactures association)는 축 방향 강성을 계산하는 식을 제안(5) 하였으며 Broman, G. 등은 벨로스를 등가 보 (equivalent beam)로 모델링하여 횡 강성을 계산하고 벨로스의 동특성을 예측(4)하였으나 기본 고유진동수는 잘 일치하였지만 고차가 될 수록 오차가 많이 증가하였다. |
Lee, W. I., Oh, J. E. and Kim, T. W., 1988, A Study on the Dynamic Characteristics of Bellows, Transactions of the Korean Society of Mechanical Engineers, Vol. 12, No. 6, pp. 1273-1281.
Lee, Y. S., Yoon, G. S. and Kim, T. W., 1999, A Study on the Analysis of the Natural Frequencies and the Development of the Simplified Formulas for Bellows, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 9, No. 2, pp. 331-339.
Lu, C. L., Wu, T. X., Yu, J. G. and Ye, Q. T., 2004, On Torsional Stiffness and Natural Frequency of Bellows, Journal of Mechanical Engineering Science, Vol. 218, Part C, pp. 263-271.
Broman, G., Hermann, M. and Jonsson, A., 1999, Modelling Flexible Bellows by Standard Beam Finite Elements, Psilander Grafiska, Karlskrona.
EJMA, 1980, Standards of the Expansion Joint Manufacturers Association, Fifth.
Ko, B. G., Lee, W. I. and Park, G. J., 1994, Improvement of the Vibration Characteristics According to Attachment of Bellows and Evaluation of Bellows Optimal Position in Automobile Exhaust System, Transactions of the KSAE, Vol. 2, No. 3, pp. 21-32.
Jakubauskas, V. F. and Weaver, D. S., 1998, Transverse Vibrations of Bellows Expansion Joints. Part II : Beam Model Development and Experimental Verification, Journal of Fluids and Structures, Vol. 12, No. 4, pp. 457-473.
Midas IT, 2010, NFX-MIDAS Manual, Midas Information Technology.
Tse, F. S., Morse, I. E. and Hinkle, R. T., 1978, Mechanical Vibration, Allyn and Bacon, Chap. 5.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.