최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.35 no.8, 2011년, pp.855 - 861
이상호 (부산대학교 정밀가공시스템) , 송길호 (POSCO 압연공정연구그룹) , 이성진 (POSCO 압연공정연구그룹) , 김병민 (부산대학교 기계공학부)
We predict the rolled-strip profile for a 6-high mill using thin rolling theory and a numerical model. In the numerical model, we calculate the distributions of the contact pressures between the rolls and the rolling pressure between the strip and the work roll in the transverse direction using the ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
냉간압연공정은 어떤 소성가공 공정 중 하나인가? | 냉간압연공정은 한 쌍 이상의 롤 사이에 상온의 슬래브를 넣고 롤에 회전을 주어 슬래브와 롤 사이의 마찰을 이용하여 판재를 더욱 얇은 판재로 가공하는 소성가공 공정 중 하나이다. | |
극박 압연은 무엇인가? | 극박 압연(Thin foil rolling)은 보통 최종 판 두께 50㎛이하, 압하율 50%이상의 압연공정을 의미한다. 특히, 이와 같은 조건에서는 압연하중에 의하여 워크롤이 탄성변형 받게 될 때, 기존의 박판 압연과 다르게 원형이 아닌 형태(Non-circle)로 변형하게 된다. | |
극박 압연공정에 사용된 압연기의 구조는? | 1에서 나타난 바와 같이 6단 압연기를 사용하였다. 압연기의 구조는 소성변형을 통하여 스트립을 압연하는 워크롤(WR), 워크롤을 지지하는 중간롤(IMR)과 백업롤(BUR)로 구성된다. |
Fleck, N. A. and Johnson, K. L., 1987, "Toward a New Theory of Cold Rolling Thin Foil," International Journal of Mechanical Science, Vol. 29, No. 7, pp. 507-524
Park, H. D. and Lee, J. J., 1988, "The Simulating Model to Strip Profile of 6 High Tandem Cold Rolling Mill," Proceedings of the KSME Spring Annual Meeting, pp. 170-173
Lee, H.S., Lee, Y. S. and Sim, W. B., 2001, "Control Technology of Thickness Deviation of Width Direction in Cold Rolling Mill," The 4th Rolling symposium.
Shi, X., Li, S. Q., Liu, X. H., Wang, G. D. and Xu, J. Y., 2004, "FEM Analysis for Steel Strip Deformation in Cold Rolling Process," Iron and Steel, Vol. 39, No. 11, pp. 45-48.
Han, S. Y., 1996, "Improvement Effect of Thickness Profile by Tapered Work Rolls," Proceedings of the KSME Fall Annual Meeting, 96F182, pp. 1094-1099.
Yu, H. L., Liu, X. H., Lee, G. T. and Park, H. D., 2008, "Numerical Analysis of Strip Edge Drop for Sendzimir Mill," Journal of a Materials Processing Technology, Vol. 208, pp. 42-52.
Song, G. H., Park, H. D., Shin, S. K. and Jin, C. J., 1998, "Analysis of Edge Drop and Development of Numerical Formula for Edge Drop Control of Cold Rolled Sheet," Trans. Of the KSME, A, Vol. 22, No. 4, pp. 723-730.
William, L. R., 1978, "Cold Rolling of Steel," pp. 511-515.
Han, S. Y., Kim, J. T., Lee, Y. H., Yi, J. J. and Kim, J. K., 1990, "Improvement on Edge Drop by Change of Work Roll Type in Silicon Steel Rolling," Trans. Of the KSME, Vol. 14, No. 4, pp. 830-838.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.