최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.35 no.6, 2011년, pp.750 - 756
임태우 (한국해양대학교 기관공학부) , 유삼상 (한국해양대학교 기계.에너지시스템공학부) , 최형식 (한국해양대학교 기계.에너지시스템공학부) , 김동혁 (한국해양대학교 기계.에너지시스템공학부)
An experimental study was carried out to measure the heat transfer coefficient in flow boiling to deionized water in a microchannel having a hydraulic diameter of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
마이크로 채널에서의 이상 유동 열전달이 마이크롤 냉각요소로 사용될 수 있는 이유는? | 마이크로 채널에서의 이상 유동 열전달은 단상 액체 유동에 비해 열소산 능력이 대단히 크기 때문에 마이크로 채널은 노트북 컴퓨터 칩, 전자 부품, 그리고 항공기의 전기 부품 등과 같은 마이크로 냉각 요소로 사용될 수 있다. 마이크로 채널에서 일어나는 열전달 과정 및 유체역학적 특성은 매크로 스케일에서의 그것과 분명히 다르며[6-10], 매크로 스케일에서 얻을 수 있는 지식의 일부만이 마이크로스케일에 적용할 수 있는 것으로 알려져 있다. | |
마이크로 채널 구조에서의 유동 비등 열전달에 대한 메커니즘은 무엇으로 밝혀지고 있는가? | 마이크로 채널에서 일어나는 열전달 과정 및 유체역학적 특성은 매크로 스케일에서의 그것과 분명히 다르며[6-10], 매크로 스케일에서 얻을 수 있는 지식의 일부만이 마이크로스케일에 적용할 수 있는 것으로 알려져 있다. 현재 마이크로 채널 구조[11]에서의 유동 비등 열전달에 대한 메커니즘을 이해하기 위한 수많은 연구가 이루어지고 있으며, 핵 비등이 마이크로 채널내에서의 증발을 지배하는 것[12]으로 여러 연구자들에 의해 밝혀지고 있다. 또한 이전의 큰 관에서의 유동 비등의 경우 대류와 핵 비등 열전달을 중요하게 고려하였으며, 총 열전달은 전형적으로 이들 두 개의 성분을 결합하여 취급하였다. |
J. Dirker, W. Liu, D. Van Wyk, J.P. Meyer and A.G. Malan, "Embedded solid state heat extraction in integrated power electronic modules", IEEE Trans. Power Electron. vol. 20, no. 3, pp. 694-703, 2005.
E.W. Kreutz, N. Pirch, T. Ebert, R. Wester, B. Ollier, P. Loosen and R. Poprawe, "Simulation of micro-channel heat sinks for optoelectronic", Microsyst. Microelectron. J. vol. 31 pp. 787- 90, 2000.
A.G. Fedorov and R. Viskanta, "Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging", Int. J. Heat Mass Transfer vol. 43 pp. 399-15, 2000.
W. Qu and I. Mudawar, "Analysis of three-dimensional heat transfer in microchannel heat sinks", Int. J. Heat Mass Transfer vol. 45 pp. 3973-985, 2002.
C.Y. Zhao and T.J. Lu, "Analysis of microchannel heat sinks for electronics cooling", Int. J. Heat Mass Transfer vol. 45 pp. 4857-869, 2002.
C.Y. Soong and S.H. Wang, "Theoretical analysis of electrokinetic flow and heat transfer in a microchannel under asymmetric boundary conditions", Colloid Interface Sci. vol. 265 pp. 202-13, 2003.
X.F. Peng and B.-X. Wang, "Forced convection and flow boiling heat transfer for liquid flowing through microchannels", Int. J. Heat Mass Transfer vol. 36 no. 14, pp. 3421- 3427, 1993.
S.G. Kandlikar, "Fundamental issues related to flow boiling in minichannels and microchannels", Exp. Therm. Fluid Sci. vol. 26, pp. 389-407, 2002.
M.W. Wambsganss et al., "Boiling heat transfer in a horizontal small-diameter tube", J. Heat Transfer Trans. ASME vol. 115 no. 4, pp. 963-972, 1993.
Thome, J.R., "Boiling in microchannels: a review of experiment and theory". Int. J. Heat and Fluid Flow vol. 25, pp. 128-139, 2004.
G. Hetsroni et al., "Fluid flow in microchannels", Int. J. Heat Mass Transfer vol. 48 no. 10, pp. 982-1998, 2005.
T.N. Tran and M.W. Wambsganss, D.M. France, "Small circular- and rectangular channel boiling with two refrigerants", Int. J. Multiphase Flow vol. 22, no. 3, pp. 485-498, 1996.
Liu, D. and Garimella, S.V., "Flow boiling in a microchannel heat sink". In: Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November pp. 5-11, 2005.
B.X. Wang and X.F. Peng, "Experimental investigation on liquid forced convection heat transfer through microchannels", International Journal of Heat and Mass Transfer vol. 37 (suppl.1) pp. 73-82, 1994.
X.F. Peng, G.P. Peterson and B.X. "Wang, Frictional flow characteristics of water flowing through rectangular micro-channels, Experimental Heat Transfer vol. 7 pp. 249-264, 1994.
X.F. Peng, G.P. Peterson and B.X. Wang, "Heat transfer characteristics of water flowing through micro-channels", Experimental Heat Transfer vol. 7 pp. 265-283, 1994.
X.F. Peng and G.P. Peterson, "Forced convection heat transfer of single-phase binary mixtures through microchannels", Experimental Thermal and Fluid Science vol. 12 pp. 98- 112, 1996.
P.S. Lee, S.V. Garimella and D. Liu, "Investigation of heat transfer in rectangular microchannels", International Journal of Heat and Mass Transfer vol. 48 pp. 1688-1704, 2005.
Y. Mishan, A. Mosyak, E. Pogrebnyak and G. Hetsroni, "Effect of developing flow and thermal regime on momentum and heat transfer in micro-scale heat sink", International Journal of Heat and Mass Transfer vol. 50, pp. 3100-3114, 2007.
W. Qu andI. Mudawar, "Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink", Int. J. Heat Mass Transfer vol. 45, pp. 2549-2565, 2002.
Liu, D., Lee, P. -S., Garimella and S. V., "Prediction of the onset of nucleate boiling in microchannel flow". International Journal of Heat and Mass Transfer vol. 48, pp. 5134- 5149, 2005.
Wang, G., Cheng, P., and Wu, H., "Unstable and stable flow boiling in parallel microchannels and in a single microchannel", International Journal of Heat and Mass Transfer vol. 50, pp. 4297-4310, 2007.
S.G. Kandlikar and W.J. Grande, "Evolution of microchannel flow passages thermo-hydraulic performance and fabrication technology", Heat Transfer Eng. vol. 24, no. 1, pp. 3-17, 2003.
A.E. Bergles, "Boiling and evaporation in small diameter channels", Heat Transfer Engineering Microchannels-Short History and Bright Future, vol. 24, no. 1, pp. 18-40, 2003.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.