최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.28 no.10, 2011년, pp.1146 - 1152
이승현 (한국기계연구원 인쇄전자연구센터) , 남기상 (한국기계연구원 인쇄전자연구센터) , 이택민 (한국기계연구원 인쇄전자연구센터) , 윤덕균 (한국기계연구원 인쇄전자연구센터) , 조정대 (한국기계연구원 인쇄전자연구센터)
Ink transfer process is very important to determine quality of printed pattern, therefore its mechanism should be understood to control printing quality. Although there have been many attempts to understand ink transfer mechanism by numerical simulation and experimental studies, their model was too ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전자소자용 롤 프린팅 연속생산장비란 무엇인가? | 전자소자용 롤 프린팅 연속생산장비는 종이나 플라스틱과 같은 유연 기판 위에 그라비아(gravure), 그라비아 옵셋(gravure-offset), 플렉소(flexo) 프린팅과 같은 롤 프린팅 기법을 이용하여 수십 um 급의미세패턴을 인쇄하여 저가의 인쇄전자소자(printed electronics)를 대량 생산하는 장비이다. 이러한 롤프린팅 공정을 이용한 인쇄전자 생산기술은 기존의 노광(lithography) 기술 등을 이용하는 반도체 공정에 비하여 진공 공정을 필요치 않기 때문에 대면적 기판 사용 시 장비, 시설 투자비가 크게 절감되며 롤투롤(roll-to-roll) 연속 생산 방식을 통하여 고속 대량생산이 가능하여 매우 저렴한 전자 소자 생산이 가능하다. | |
그라비아 옵셋 프린팅 공정은 어떻게 나뉘는가? | 인쇄전자 공정에서 널리 쓰이고 있는 그라비아 옵셋 프린팅 공정의 경우 패턴롤에서 블랭킷롤로 잉크가 전이되는 오프(off) 공정과, 블랭킷롤에서유연기판으로 잉크가 전이되는 셋(set) 공정으로 나뉘어 질 수 있는데 각 공정마다 매우 다양한 물리적 현상들이 복합적으로 연관되어 있다. 아래 그림은 그라비아 옵셋 프린팅 공정의 모식도를 보여주고 있다. | |
롤 프린팅 기법을 이용한 인쇄전자 생산기술의 장점은 무엇인가? | 전자소자용 롤 프린팅 연속생산장비는 종이나 플라스틱과 같은 유연 기판 위에 그라비아(gravure), 그라비아 옵셋(gravure-offset), 플렉소(flexo) 프린팅과 같은 롤 프린팅 기법을 이용하여 수십 um 급의미세패턴을 인쇄하여 저가의 인쇄전자소자(printed electronics)를 대량 생산하는 장비이다. 이러한 롤프린팅 공정을 이용한 인쇄전자 생산기술은 기존의 노광(lithography) 기술 등을 이용하는 반도체 공정에 비하여 진공 공정을 필요치 않기 때문에 대면적 기판 사용 시 장비, 시설 투자비가 크게 절감되며 롤투롤(roll-to-roll) 연속 생산 방식을 통하여 고속 대량생산이 가능하여 매우 저렴한 전자 소자 생산이 가능하다. 이러한 이유로 인하여 최근 들어 롤 프린팅 기술을 이용한 인쇄전자 제작에 대한 연구가 전세계적으로 널리 이루어지고 있다. |
Kim, C. H., Choi, B. O., Ryu, B. S. and Kim, D. S., "Gravure Offset Printing for Printed Electronics," J. of KSPE, Vol. 25, No. 5, pp. 96-102, 2008.
Choi, B.-O., Kim, C. H. and Kim, D.-S., "Manufacturing Ultra-high-frequency Radio Frequency Identification Tag Antennas by Multilayer Printings," Proc. IMechE Part C: J. Mechanical Engineering Science, Vol. 224, No. 1, pp. 149-156, 2010.
Kopolar, P., Tumikoski, M., Suhonen, R. and Maaninen, A., "Gravure Printed Organic Light Emitting Diodes for Lighting Applications," Thin Solid Films, Vol. 517, No. 19, pp. 5757-5762, 2009.
Lija, K. E., B cklund, T. G., Lupo, D., Hassinen, T. and Joutsenoja, T., "Gravure Printed Organic Rectifying Diodes Operating at High Frequencies," Organic Electronics, Vol. 10, No. 5, pp. 1011-1014, 2009.
Lee, T.-M., Noh, J.-H., Kim, I., Kim, D.-S. and Chun, S., "Reliability of Gravure Offset Printing under Various Printing Conditions," J. Applied Physics, Vol. 108, No. 10, Paper No. 102802, 2010.
Padus, M., Hagberg, J. and Lepp vuori, S., "The Absorption Ink Transfer Mechanism of Gravure Offset Printing for Electronics Circuitry," IEEE Trans. Electronics Packaging Manufacturing, Vol. 25, No. 4, pp. 335-343, 2002.
Pudas, M., Hagberg, J. and Lepp vuori, S., "Printing Parameters and Ink Components Affecting Ultra-fineline Gravure-offset Printing for Electronics Applications," Journal of the European Ceramic Society, Vol. 24, No. 10-11, pp. 2943-2950, 2004.
Pudas, M., Hagberg, J. and Lepp vuori, S., "Gravure Offset Printing of Polymer Inks for Conductors," Progress in Organic Coatings, Vol. 49, No. 4, pp. 324-335, 2004.
Pudas, M., Hagberg, J. and Lepp vuori, S., "Rollertype Gravure Offset Printing of Conductive Inks for High-resolution Printing on Ceramic Substrates," International Journal of Electronics, Vol. 92, No. 5, pp. 251-269, 2005.
Neff, J. E., "Investigation of the Effects of Process Parameters on Performance of Gravure Printed ITO on Flexible Substrates," M.S. Thesis, Mechanical Engineering, Georgia Institute of Technology, 2009.
Lee, J.-W., Mun, K. K. and Yoo, Y. T., "A Comparative Study on Roll-to-roll Gravure Printing on PET and BOPP Webs with Aqueous Ink," Progress in Organic Coating, Vol. 64, No. 1, pp. 98-108, 2009.
Lee, T.-M., Lee, S.-H., Noh, J.-H., Kim, D.-S. and Chun, S., "The Effect of Shear Force on Ink Transfer in Gravure Offset Printing," J. Micromech. Microeng., Vol. 20, No. 12, Paper No. 125026, 2010.
Schwartz, L. W., "Numerical Modeling of Liquid Withdrawal from Gravure Cavities in Coating Operations; the Effect of Cell Pattern," J. Engineering Mathematics, Vol. 42, No. 3-4, pp. 243-253, 2002.
Powell, C. A., Savage, M. D. and Guthrie, J. T., "Computational Simulation of the Printing of Newtonian Liquid from a Trapezoidal Cavity," Int. J. Numerical Methods for Heat & Fluid Flow, Vol. 12, No. 4, pp. 338-355, 2002.
Yin, X. and Kumar, S., "Lubrication Flow Between a Cavity and a Flexible Wall," Phys. Fluids, Vol. 17, No. 6, Paper No. 063101, 2005.
Yin, X. and Kumar, S., "Two-dimensional Simulations of Flow near a Cavity and a Flexible Solid Boundary," Phys. Fluids, Vol. 18, No. 6, Paper No. 063103, 2006.
Hoda, N. and Kumar, S., "Boundary Integral Simulations of Liquid Emptying from a Model Gravure Cell," Phys. Fluids, Vol. 20, No. 9, Paper No. 092106, 2008.
Dodds, S., Carvalho, M. S. and Kumar, S., "Stretching and Slipping of Liquid Bridges near Plates and Cavities," Phys. Fluids, Vol. 21, No. 9, Paper No. 092103, 2009.
Huang, W.-X., Lee, S.-H., Sung, H. J., Lee, T.-M. and Kim, D.-S., "Simulation of Liquid Transfer between Separating Walls for Modeling Micro-gravure-offset Printing," Int. J. Heat & Fluid Flow, Vol. 29, No. 5, pp. 1436-1446, 2008.
Lee, S. and Na, Y., "Effect of Roll Patterns on the Ink Transfer in R2R Printing Process," Int. J. Precision Engineering and Manufacturing, Vol. 10, No. 5, pp. 120-130, 2009.
Ahmed, D. H., Sung, H. J. and Kim, D.-S., "Simulation of non-Newtonian Ink Transfer between Two Separating Plates for Gravure-offset Printing," Int. J. Heat & Fluid Flow, Vol. 32, No. 1, pp. 298-307, 2011.
Ghadri, F., Ahmed, D. H., Sung, H. J. and Shirani, E., "Non-Newtonian Ink Transfer in Gravure-offset Printing," Int. J. Heat & Fluid Flow, Vol. 32, No. 1, pp. 308-317, 2011.
Bhat, P. P., Basaran, O. A. and Pasquali, M., "Dynamics of Viscoelastic Liquid Filaments: Low Capillary Number Flows," J. Non-Newtonian Fluid Mech., Vol. 150, No. 2-3, pp. 211-225, 2008.
McKinley, G. H. and Sridhar, T., "Filament-Stretching Rheometry of Complex Fluids," Annu. Rev. Fluid Mech., Vol. 34, No. 1, pp. 375-415, 2002.
Notz, P. K. and Basaran, O., "Dynamics and Breakup of a Contracting Liquid Filament," J. Fluid Mech., Vol. 512, pp. 223-256, 2004.
Pearson, G. and Middleman, S., "Elongational Flow Behavior of Viscoelastic Liquids: Modelling Bubble Dynamics with Viscoelastic Constitutive Relations," Rheol. Acta, Vol. 17, No. 5, pp. 500-510, 1978.
Rodd, L. E., Scott, T., Cooper-White, J. J. and McKinley, G. H., "Capillary Break-up Rheometry of Low-Viscosity Elastic Fluids," Applied Rheology, Vol. 15, No. 1, pp. 12-27, 2005.
Sizaire, R. and Legat, V., "Finite Element Simulation of a Filament Stretching Extensional Rheometer," J. Non-Newtonian Fluid Mech., Vol. 71, No. 1-2, pp. 89-107, 1997.
Kim, K., Kim, C. H., Kim. H.-Y. and Kim, D. -S., "Effects of Blanket Roller Deformation on Printing Qualities in Gravure-Offset Printing Method," Japanese Journal of Applied Physics, Vol. 49, No. 5, Paper No. 05EC04, 2010.
Yin, X., "Visualization and Modeling of Flow inside Gravure Cells and Grooves," Ph.D. Dissertation, Chemical Engineering, University of Minnesota, 2005.
Yin, X. and Kumar, S., "Flow Visualization of the Liquid-emptying Process in Scaled-up Gravure Grooves and Cells," Chem. Eng. Sci., Vol. 61, No. 4, pp. 1146-1156, 2006.
Kang, H. W., Sung, H. J., Lee, T.-M., Kim, D.-S. and Kim, C.-J., "Liquid Transfer between Two Separating Plates from Micro-gravure-offset Printing," J. Micromech. Microeng., Vol. 19, No. 1, Paper No. 015025, 2009.
Dodds, S., Carvalho, M. S. and Kumar, S., "Stretching Liquid Bridges with Bubbles: The Effect of Air Bubbles on Liquid Transfer," Langmuir, Vol. 27, No. 5, pp. 1556-1559, 2011.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.