최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기산업공학 = IE Interfaces, v.25 no.4, 2012년, pp.422 - 430
김성규 (경기대학교 대학원 산업경영공학과) , 김용수 (경기대학교 산업경영공학과)
In this article, we introduced the estimation method by 'Safety Integrity Level'(SIL) for the criterion of safety assurance and performed a case study on a flame scanner. SIL requires probabilistic evaluation of each set of equipment used to reduce risk in a safety related system. FMEDA(Failure Mode...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Safety Instrumented System의 수행 목적은? | 기능안전의 임무를 수행하는 SIS는 센서와 단일 또는 다중의 제어기로 구성되어 개인, 장비, 환경에 대한 보호 시스템을 의미한다. SIS의 수행목적은 안전성 향상 또는 위험의 감소를 위해 잠재위험의 모니터링과 사고가 발생하였을 경우 사전에 계획된 프로그램을 통해 피해결과를 최소화하는 데 있다. 이러한 SIS는 공정에 대한 생산량을 증대시키거나 공정효율을 높이는 효과는 없으나 사고에 대한 손실을 감소시킴으로써, 유지 보수 비용과 위험 비용을 절감시킨다(Jin et al. | |
안전이란 무엇인가? | 안전이란 일반적으로 위험이 생기거나 사고가 발생할 염려가 없는 상태로서, 시스템적 측면에서는 시스템의 고장을 야기할 수 있는 모든 위험원의 위험도(Risk)가 허용수준 이내로 제어된 상태라고 할 수 있다(Shin et al., 2009). | |
기능안전은 무엇을 대상으로 하는가? | , 2009). 이러한 안전의 개념에 포함되는 기능안전은 안전을 제공하기 위한 장치나 시스템과 같은 안전장치들의 기능 및 관련된 신뢰성 측면을 대상으로 한다. 즉, 위험 상황에서 특정 안전장치가 설계대로 작동된다면, 기능안전(functional safety)이 우수하다고 평가할 수 있는 것이다. |
IEC 61508-0 (2010), Functional safety of electrical/electronic/programmable electronic safety-related systems-part 0 : Functional safety and IEC 61508.
IEC 61508-1 (2010), Functional safety of electrical/electronic/programmable electronic safety-related systems-part 1 : General requirements.
IEC 61508-2 (2010), Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 2 : Requirements for electrical/electronic/ programmable electronic safety-related systems.
IEC 61508-4 (2010), Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 4 : Definitions and abbreviations.
IEC 61508-6 (2010), Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 6 : Guidelines on the application of IEC 61508-2 and IEC 61508-3.
SIEMENS SN 29500-1 (1996), Failure rates of components-Expected values, General.
SIEMENS SN 29500-2 (1999), Failure rates of components-Expected values for integrated circuits.
SIEMENS SN 29500-3 (1997), Failure rates of components-Expected values for discrete semiconductors.
SIEMENS SN 29500-4 (1999), Failure rates of components-Expected values for passive components.
SIEMENS SN 29500-6 (1996), Failure rates of components-Expected values for electrical and optical connectors and sockets.
SIEMENS SN 29500-7 (1997), Failure rates of components-Expected values for relays.
Telcordia SR-332 (2006), Reliability prediction procedure for Electronic equipment : Issue 2.
SINTEF (2010), Reliability Prediction Method and Data for Safety Instrumented Systems, Trondheim, Norway.
Chang, S-H., An, G-Y., Lee, D.-G., and Lee, J. (2009), A study on the SIL application for electronic interlocking equipment of high speed line, 2009 Fall Conference Publication of the Korean Society for Railway, 3442-3447.
Cho, C.-H., Kang, C.-Y., and Hwang, J.-H. (2010), Study on ISA's assessment to software process for EN50128 SIL4, 2010 Spring Conference Publication of the Korean Society for Railway, 838-849.
Choi, J.-R., Kim, Y.-S. and Shin, S.-K. (2009), SIL Assessment and Validation of ATP On-Board System using Fault Tree Analysis, 2009 Fall Conference Publication of the Korean Society for Railway, 1439-1447.
Goble, W. M. and Brombacher, A. C. (1999), Using a failure modes, effects and diagnostic analysis (FMEDA) to measure diagnostic coverage in programmable electronic systems, Reliability Engineering and System Safety, 66(2), 145- 148.
Jin, S.-H., Song, K. H., Yeo, Y.-K. and Kim, I.-W. (2002), Development of the SIS Evaluation Method Based on Reliability Analysis, Journal of the Korean Institute of Gas, 6(1), 66-73.
Joung, E.-J. and Kim, Y.-M. (2004), A Hazard Identification and Analysis for the Train Control System of Light Rail Transit, The Transactions of KIEE, 53B(2), 99-106.
Keum, J.-Y., Suh, Y.-S., Lee, J.-K., and Park, J.-Y. (2008), Measurement of a Diagnostic Coverage for a Digital Signal Processor Board Using an FMEDA, Journal of Applied Reliability, 8(2), 101-111.
Kim, G.-Y., Ko, B.-G., Jang J. S., and Chan, S.-I. (2010), Assessment Procedure of Safety Integrity Level(SIL) Based on Flowchart, Journal of Applied Reliability, 10(2), 107-122.
Ko, J.-S. and Kim, H. (2003), Reliability Analysis on Firewater Supply Facilities based on the Probability Theory with Considering Common Cause Failures, Journal of Korean Institute of Fire Science and Engineering, 17(4), 76-85.
Ko, J.-S., Kim, H., and Lee, S.-K. (2006), Reliability Analysis on Safety Instrumented System by Using Safety Integrity Level for Fire.Explosion Prevention in the Ethyl Benzene Processes, Journal of Korean Institute of Fire Science & Engineering, 20(3), 1-8.
Lundteigen, M. A. and Rausand, M. (2009), Architectural constraints in IEC 61508 : Do they have the intended effect?, Reliability Engineering and System Safety, 94(2), 520-525.
Sammarco, J. J. (2007), Programmable Electronic and Hardwired Emergency Shutdown Systems : A Quantified Safety Analysis, IEEE Transactions on Industry Applications, 43(4), 1061-1068.
Shin, D., Baek, J.-H., Lee, K.-M., and Lee, J.-H. (2009), A Study on the SIL Allocation and Demonstration for Train Control System, 2009 Spring Conference Publication of the Korean Society for Railway, 855-859.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.