최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전력전자학회 논문지 = The Transactions of the Korean Institute of Power Electronics, v.17 no.6, 2012년, pp.471 - 477
김동희 (College of Information and Communication Eng., Sungkyunkwan Univ.) , 이희서 (College of Information and Communication Eng., Sungkyunkwan Univ.) , 이영달 (College of Information and Communication Eng., Sungkyunkwan Univ.) , 이은주 (College of Information and Communication Eng., Sungkyunkwan Univ.) , 이태원 (PIA TF, Samsung Electro-Mechanics Co., Ltd.) , 이병국 (College of Information and Communication Eng., Sungkyunkwan Univ.)
In this paper, in order to use module integrated converter using cascaded buck-boost converter for a low battery charger in stand-alone system, a charging algorithm which considers photovoltaic and battery status and PWM controllers which are changed according to charging modes are proposed. The pro...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MIC의 장점은? | MIC의 경우 각각의 태양광 모듈 출력을 독립적으로 제어하기 때문에 각 모듈의 최대전력점 (Maximum Power Point, MPP)을 추종할 수 있는 장점을 가지며, 크게 MIC는 출력이 교류인 AC-MIC 또는 Micro Inverter와 직류 출력인 DC-MIC로 나뉜다 [2]. 이 중 독립형의 경우 태양광이 없는 경우 부하로 전력 공급을 해주기 위해 2차 배터리가 반드시 추가된다. | |
Cascaded Buck-Boost 컨버터 구조의 MIC를 이용한 태양광 발전 시스템의 저전압 배터리 충전을 위한 알고리즘과 제어기를 제안하였고 150W 하드웨어설계를 통해 시작품을 제작하였다, 연구 결과는 어떤가? | 본 논문은 Cascaded Buck-Boost 컨버터 구조의 MIC를 이용한 태양광 발전 시스템의 저전압 배터리 충전을 위한 알고리즘과 제어기를 제안하였고 150W 하드웨어설계를 통해 시작품을 제작하였다. 제안한 알고리즘은 태양광 발전 특성을 고려하여 충전 모드가 결정되고 이에 따라 배터리를 최적으로 충전할 수 있다. 또한 하드웨어 설계를 통해 최고 효율 96.6%를 얻을 수 있었다. 이에 따라 기존의 승압 또는 강압 조건으로 동작하는 저전압 배터리 충전시스템보다 다양한 조건에서 적용가능하며 각각의 조건에 따른 최적의 충전 모드가 결정되어 PV 모듈과 배터리를 최적으로 선정할 수 있다. 개발된 시스템은 독립된 섬 지역, 가로등 및 안내판 등의 LED에 적용하게 되면 최적으로 배터리를 충전하여 운영할 수 있을 것으로 판단된다. | |
태양 에너지 발전의 한계점은? | 태양광 (Photovoltaic, PV) 발전 시스템은 에너지 사용에 대한 규제와 그리드 패리티 (Grid Parity) 도달에 따라 점점 더 청정 에너지원으로 각광받고 있으며 이에 따라 많은 연구들이 진행되고 있다[1],[2]. 하지만 태양 에너지 특성상 주변 환경의 변화에 따라 발전이 종속되며, 직병렬로 구성된 태양광 모듈간의 일사량 불균형(Mismatching) 문제나 모듈에 음영이 생기는 현상이 발생할 경우, 기존의 하나의 PCS (Power Conditioning System)로 태양광 발전을 제어하는 중앙 PCS는 각각의 태양광 모듈의 발전을 최대로 제어할 수 없다. 이를 극복하기 위해 각각의 태양광 모듈에 전력변환장치를 추가하여 주변 환경의 변화에 능동적으로 대응하여 발전량을 극대화 할 수 있는 모듈 집접형 컨버터 (Module Integrated Converter, MIC)에 관한 연구가 활발히 진행 되고 있다[3]-[5]. |
R. Alonso, P. Ibanez, V. Martinez, E. Roman, A. Sanz, "Analysis of performance of new distributed MPPT architectures," IEEE International Symposium on Industrial Electrinics (ISIE), pp. 3450-3455, 2010.
M. Rogol, S. Doi, and A. Wilkinson, "Sun screen: Investment opportunities in solar power," Solar Power Sector Outlook, CLSA Asia-Pacific Markets, 2004 July.
Perry Tsao, "Simulation of PV systems with power optimizers and distributed power electronics," IEEE Photovoltaic Specialists Conference, pp. 389-393, 2010.
R. Orduz, J. Solorzano, M. A. Egido, E. Roman, "Analytical study and evaluation results of power optimizers for distributed power conditioning in photovoltaic arrays," Progress in Photovoltaic: Research and Applications, Nov. 2011.
Q. Li, P. Wolfs, "A review of the single phase photovoltaic module integrated converter topologies with three different dc link configurations," IEEE Transactions on Power Electronics, Vol. 23, No. 3. pp. 1320-1333, May. 2008.
H. J. Chiu, Y. K. Lo, C. J. Yao, T. P. Lee, J. M Wang, J. X. Lee, "A modular self-controlled photovoltaic charger with interintegrated circuit (I2C) interface," IEEE Transactions on Energy Conversion, Vol. 26, No. 1, pp. 281-289, March. 2011.
Y. C. Chuang, H. S. Chuang, Y. L. Ke, "design and implementation of battery charger with zero-voltage-switching resonant converter for photovoltaic arrays," IEEE Industrial and Commercial Power Systems Technical Conference, pp. 1-6, 2006.
K. Liu, J. Makaran, "Design of a solar powered battery charger," IEEE Electrical Power & Energy Conference, pp. 1-5, 2009.
C. C. Hua, P. K. Ku, "Implementation of a stand-alone photovoltaic lighting system with MPPT, battery charger and high brightness LEDs," IEEE Power Electronics and Drives Systems, pp. 1601-1605, 2005.
V. R. Vladimir, B. Simone, S. Giorgio, "Low-complexity MPPT technique exploiting the PV module MPP locus characterization," IEEE Transactions on Industrial Electronics, Vol. 56, No. 5, pp. 1531-1538, May. 2009.
R. Alonso, P. Ibanez, V. Martinez, E. Roman, A. Sanz, "Analysis of Performance of New Distributed MPPT Architectures," IEEE International Symposium on Industrial Electronics, pp. 3450-3455, 2010.
S. J. Chiang, H. J. Shieh, M. C. Chen, "Modeling and control of PV charger system with sepic converter," IEEE Transactions on industrial electronics, Vol. 56, No. 11, pp. 4344-4353, Nov. 2009.
B. S. Manju, R. Ramaprabha, B. L. Matur, "Modeling and control of standalone solar photovoltaic charging system," International Conference on Emerging Trends in Electrical and Computer Technology, pp. 78-81. 2011.
N. K. Gautam, N. D. Kaushika, "An efficient algorithm to simulate the electrical performance of solar photovoltaic arrays," Centre for Energy Studies, Indian Institute of Technology, Hauz Khas, New Delhi, India; 2002.
A. Radic, A. Prodic, "Buck converter with merged active charge-controlled capacitive attenuation," IEEE Transactions on Power Electronics, Vol. 27, No. 3, pp. 1049-1054, Mar. 2012.
E. C. Nho, G. B. Jung, N. S. Choi, "Power Electronics 3rd edition," Munundang, Korea, 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.