최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.25 no.3, 2012년, pp.227 - 235
정상엽 (연세대학교 토목환경공학과) , 한동석 (연세대학교 토목환경공학과) , 윤태섭 (연세대학교 토목환경공학과) , 염광수 (GS건설(주) 기술연구소) , 전현규 (GS건설(주) 기술연구소) , 강동훈 (연세대학교 토목환경공학과)
The void distribution in concrete materials strongly affects its material properties. Therefore, the identification of spatial distribution of void is important to understand and estimate material behavior. To examine and quantify the void distribution inside lightweight aggregates, CT(computed tomo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
경량 콘크리트의 공극 분포와 재료 물성치를 정량화하는 것이 필요한 이유는 무엇인가? | 콘크리트는 다상 재료임과 동시에 다공질 재료이기 때문에 육안으로 보이는 표면의 공극 이외에도 재료 내부에 많은 공극이 존재한다. 특히, 콘크리트 부재의 자중 감소 효과를 위해 제작되는 경량 콘크리트의 경우, 사용되는 경량 골재 내부에 많은 공극이 존재하기 때문에 재료의 효과적인 건전성 확보를 위해서는 공극 분포와 재료 물성치를 정량화하는 것이 필요하다. | |
경량 콘크리트는 무엇을 위해 제작되는가? | 콘크리트는 다상 재료임과 동시에 다공질 재료이기 때문에 육안으로 보이는 표면의 공극 이외에도 재료 내부에 많은 공극이 존재한다. 특히, 콘크리트 부재의 자중 감소 효과를 위해 제작되는 경량 콘크리트의 경우, 사용되는 경량 골재 내부에 많은 공극이 존재하기 때문에 재료의 효과적인 건전성 확보를 위해서는 공극 분포와 재료 물성치를 정량화하는 것이 필요하다. | |
경량 골재 내부의 공극의 문제점은 무엇인가? | 경량 골재에 존재하는 내부 공극은 육안으로 직접 관찰하기 어렵기 때문에 공극의 크기 및 분포 형태를 파악하는 것은 쉽지 않다. 본 연구에서는 육안으로 관찰할 수 없는 경량 골재 내부의 공극을 살펴보기 위하여 CT(computed tomography)를 사용하여 경량 골재 내부의 공극 구조를 살펴보았다. |
정상엽, 김영진, 윤태섭, 전현규 (2011) Micro CT 이미지 분석을 통한 경량 골재 콘크리트의 공극 분포 분석, 대한토목학회논문집, 31(2A), pp.121-127.
정상엽, 한동석 (2011) 2상 다결정 미세구조의 상 분포 위상에 따른 역학적 거동 분석, 한국전산구조공학회 논문집, 24(1), pp.9-16.
Chung. S.-Y., Han, T.-S. (2010) Reconstruction of Random Two-Phase Polycrystalline Solids using Low-Order Probability Functions and Evaluation of Mechanical Behavior, Computational Materials Science, 49, pp.705-719.
Coker, D.A., Torquato, S. (1995) Extraction of Morphological Quantities from a Digitized Medium, Journal of Applied Physics, 77, pp.6087-6099.
Corson, P.B. (1974) Correlation Functions for Predicting Properties of Heterogeneous Materials. I. Experimental Measurement of Spatial Correlation Functions in Multiphase Solids, Journal of Applied Physics, 45, pp.3159-3164.
Dorey, R.A., Yeomans, J.A., Smith, P.A. (2002) Effect of pore Clustering on the Mechanical Properties of Ceramics, Journal of the European Ceramic Society, 22, pp.403-409.
Gokhale, A.M., Tewari, A., Garmestani, H. (2005) Constraint on Microstructural Two-Point Correlation Functions, Scripta Materialia, 53, pp.989-993.
Han, T.-S., Dawson, P.R. (2005) Representation of Anisotropic Phase Morphology, Modelling and Simulation in Materials Science and Engineering, 13, pp.203-223.
Singh. H., Gokhale, A.M., Lieberman, S.I., Tamirisakandala, S. (2008) Image Based Computations of Lineal Path Probability Distributions for Microstructure Representation, Materials Science and Engineering A, 474, pp.104-111.
Tewari, A., Gokhale, A.M., Spowart, J.E., Miracle, D.B. (2004) Quantitative Characterization of Spatial Clustering in Three-Dimensional Microstructures using Two-Point Correlation Functions, Acta Materialia, 52, pp.307-319.
Torquato, S. (2002) Random heterogeneous materials, Springer, New York, p.701.
Underwood, E. (1970) Quantitative stereology, Addison-Wesley, Massachusetts, p.274.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.