참고문헌 (53)

1. M. A. Rodriguez-Perez, "Crosslinked polyolefin foams: production, structure, properties, and applications", Adv. Polym. Sci., 184, 97 (2005). 

   상세보기

2. J. I. Velasco, M. Antunes, O. Ayyad, J. M. Lopez-Cuesta, P. Gaudon, C. Saiz-Arroyo, M. A. Rodriguez-Perez, and J. A. de Saja, "Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites", Polymer, 48, 2098 (2007). 

   상세보기

3. M. Antunes, V. Realinho, and J. I. Velasco, "Foaming Behaviour, Structure, and Properties of Polypropylene Nanocomposites Foams", J. Nanomater., doi:10.1155/2010/306384 (2010). 

   상세보기

4. L. J. Lee, C. Zeng, X. Cao, X. Han, J. Shen, and G. Xu, "Polymer nanocomposite foams", Compos. Sci. Technol., 65, 2344 (2005). 

   상세보기

5. M. Antunes, V. Realinho, and J. I. Velasco, "Foaming Behaviour, Structure, and Properties of Polypropylene Nanocomposites Foams", J. Nanomater., 2010, 1 (2010). 

6. C. Zeng, X. Han, L. J. Lee, K. W. Koelling, and D. L. Tomasko, "Polymer-clay nanocomposite foams prepared using carbon dioxide", Adv. Mater., 15, 1743 (2003). 

   상세보기

7. Y. Di, S. Iannace, E. Di Maio, and L. Nicolais, " Poly(lactic acid)/organoclay nanocomposites: thermal, rheological properties and foam processing", J. Polym. Sci. B, 43, 689 (2005). 

   상세보기

8. X. Han, C. Zeng, L. J. Lee, K. W. Koelling, and D. L. Tomasko, "Extrusion of polystyrene nanocomposite foams with supercritical $CO_{2}$ ", Polym. Eng. Sci., 43, 1261 (2003). 

   상세보기

9. M. Okamoto, P. H. Nam, P. Maiti, T. Kotaka, T. Nakayama, M. Takada, M. Ohshima, A. Usuki, N. Hasegawa, and H. Okamoto, "Biaxial flowinduced alignment of silicate layers in polypropylene/clay nanocomposite foam", Nano Lett., 1, 503 (2001). 

   상세보기

10. A. E. Lawindy, K. M. A. El-Kade, W. E. Mahmoud, and H. H. Hassan, "Physical studies of foamed reinforced rubber composites Part I. Mechanical properties of foamed ethylene propylene-diene terpolymer and nitrile-butadiene rubber composites", Polym. Int., 51, 601 (2002). 

    상세보기

11. H. M. Da Costa, L. L. Y. Visconte, R. C. R. Nunes, and C. R. G. Furtado, "Use of Rice Husk Ash as Filler in Natural Rubber Vulcanizate: In comparison with Other Commercial Fillers", J. Appl. Polym. Sci., 83, 2331 (2002). 

    상세보기

12. P. L. The, Z. A. Mohd Ishak, A. S. Hashim, J. Karger-Kocsis, and U. S. Ishiaku, "On the potential of organoclay with respect to conventional fillers (carbon black, silica) for epoxidized natural rubber compatibilized natural rubber vulcanizates", J. Appl. Polym. Sci., 94, 2438 (2004). 

    상세보기

13. N. Nagata, T. Sato, T. Fujii, and Y. Saito, "Structure and mechanical properties of hydrogenated NBR/zinc dimethacrylate vulcanizates", J. Appl. Polym. Sci. symp., 53, 103 (1994). 

14. Y. Lu, L. Liu, C. Yang, M. Tian, and L. Zhang, "The morphology of zinc dimethacrylate reinforced elastomers investigated by SEM and TEM", Eur. Polym. J., 41, 577 (2005). 

    상세보기

15. J. W. Lee, H. S. Joo, S. C. Kang, and Y. W. Chang, "Effect of zinc dimethacrylate on mechanical properties of dynamically vulcanized polypropylene(PP) and nitrile rubber(NBR) blends", Elastomer, 41, 245 (2006). 

16. Y. Lu, L. Liu, D. Shen, C. Yang, and L. Zhang, "Infrared study on in situ polymerization of zinc dimethacrylate in poly ( ${\alpha}$ -octylene-co-ethylene) elastomer", Polym. Int., 53, 802 (2004). 

    상세보기

17. Y. Lu, L. Liu, M. Tian, H. Geng, and L. Zhang, "Study on mechanical properties of elastomers reinforced by zinc dimethacrylate", Eur. Polym. J., 41, 589 (2005). 

    상세보기

18. A. Du, Z. Peng, Y. Zhang, and Y. Zhang, " Polymerization conversion and structure of magnesium methacrylate in ethylene- vinyl acetate rubber vulcanizates", J. Appl. Polym. Sci., 93, 2379 (2004). 

    상세보기

19. W. S. Jin, H. S. Lee, and C. Nah, "Preparation and physical properties of acrylonitrile-butadiene rubber nanocomposites filled with zinc dimethacrylate", Polymer (Korea), 28, 185 (2004). 

20. J. H. Won, H. S. Joo, and Y. W. Chang, "Preparation and Properties of EPDM/Zinc Methacrylate Hybrid Composites", Elastomer, 40, 59 (2005). 

21. Z. Peng, X. Liang, Y. Zhang and Y. Zhang, "Reinforcement of EPDM by in situ prepared zinc dimethacrylate", J. Appl. Polym. Sci., 84, 1339 (2002). 

    상세보기

22. X. Yuan, Z. Peng, Y. Zhang, and Y. Zhang, "In situ preparation of zinc salts of unsaturated carboxylic acids to reinforce NBR", J. Appl. Polym. Sci., 77, 2740 (2000). 

    상세보기

23. X. Yuan, Y. Zhang, Z. Peng, and Y. Zhang, "In situ preparation of magnesium methacrylate to reinforce NBR", J. Appl. Polym. Sci., 84, 1403 (2002). 

    상세보기

24. A. Du, Z. Peng, Y. Zhang, and Y. Zhang, "Polymerization conversion and structure of magnesium methacrylate in ethylene- vinyl acetate rubber vulcanizates", J. Appl. Polym. Sci., 93, 2379 (2004). 

    상세보기

25. T. Ikeda, S. Sakurai, K. Nakano, and B. Yamada, "Copolymerization of zinc methacrylate and perfluoroalkyl acrylate in hydrocarbon medium", J. Appl. Polym. Sci., 59, 781 (1996). 

    상세보기

26. T. Ikeda and B. Yamada, "Simulation of the in situ copolymerization of zinc methacrylate and 2-(N-ethylperfluoro-octanesulphonamido) ethyl acrylate in hydrogenated nitrile-butadiene rubber", Polym. Int., 48, 367 (1999). 

    상세보기

27. K. Horiuchi and A. Hamada, "Golf ball", Europe Patent, 0,582,487 A1, September 2, 1994. 

28. D. S. Granatowicz, M. T. Morris, M. V. Pilkington, and G. R. Tompkin, "High modulus belt compostion and belts made therewith", Europe Patent, 0,864,607 A1, September 16, 1998. 

29. Y. Keisaku, I. Kiyoshi, and K. Junichi, "Rubber composition", Europe Patent, 0,589,701 A1, March 30, 1994. 

30. R. M. Freeman, W. L. Hergenrother, and F. J. Ravagnani, "High modulus low hysteresis rubber compound for pneumatic tires", US Patent, 5,464,899 A, November 7, 1995. 

31. Z. M. Ariff, Z. Zakaria, L. H. Tay, and S. Y. Lee, "Effect of foaming temperature and rubber grades on properties of natural rubber foams", J. Appl. Polym. Sci., 107, 2531 (2008). 

    상세보기

32. J. H. Kim, K. C. Choi, J. M. Yoon, and S. Y. Kim, "Effects of Foaming temperature and carbon black content on the cure behaviors and foaming characteristics of the natural rubber foams", Elastomer, 41, 147 (2006). 

33. E. S. Park, "Mechanical properties and antibacterial activity of peroxide-cured silicone rubber foams", J. Appl. Polym. Sci., 110, 1723 (2008). 

    상세보기

34. G. Li and M. John, "A Crumb Rubber Modified Syntactic Foam", Mater. Sci. Eng. A, 474, 390 (2008). 

    상세보기

35. G. Li and N. Jones, "Development of Rubberized Syntactic Foam", Composites Part A, 38, 1483 (2007). 

    상세보기

36. R. Maharsia, N. Gupta, and H. D. Jerro, "Investigation of flexural strength properties of rubber and nanoclay reinforced hybrid syntactic foams", Mater. Sci. Eng. A, 417, 249 (2006). 

    상세보기

37. J. H. Kim, K. C. Choi, and J. M. Yoon, "The Foaming Characteristics and Physical Properties of Natural Rubber Foams: Effects of Carbon Black Content and Foaming Pressure", J. Ind. Eng. Chem., 12, 795 (2006). 

38. H. Jin, W. Y. Lu, S. Scheffel, M. K. Neilsen, and T. D. Hinnerichs, "Characterization of Mechanical Behavior of Polyurethane Foams using Digital Image Correlation", 2005 ASME International Mechanical Engineering Congress & Exposition, Nov. 5-11, Orlando, FL, USA. 

39. Z. Xiao, R. Guan, Y. Jiang, and Y. Li, "Tensile property of thin microcellular PC sheets prepared by compression molding", eXPRESS Polym. Lett., 1, 217 (2007). 

    

40. S. M. Kang, S. J. Lee, and B. K. Kim, "Shape memory polyurethane foams", eXPRESS Polym. Lett., 6, 63 (2012). 

    

41. Z. Wang and T. J. Pinnavaia, "Nanolayer reinforcement of elastomeric polyurethane", Chem. Mater., 10, 3769 (1998). 

    상세보기

42. J. H. Chang and Y. U. An, "Nanocomposites of polyurethane with various organoclays: thermomechanical properties, morphology, and gas permeability", J. Polym. Sci. Part B Polym. Phys., 40, 670 (2002). 

    상세보기

43. Y. I. Tien and K. H. Wei, "High-tensile-property layered silicates/ polyurethane nanocomposites by using reactive silicates as pseudo chain extenders", Macromolecules, 34, 9045 (2001). 

    상세보기

44. T. K. Chen, Y. I. Tien, and K. H. Wei, "Synthesis and characterization of novel segmented polyurethane/clay nanocomposites", Polymer, 41, 1345 (2000). 

    상세보기

45. X. Cao, L. J. Lee, T. Widya, and C. Macosko, "Polyurethane/ clay nanocomposites foams: processing, structure and properties", Polymer, 46, 775 (2005). 

    상세보기

46. Y. Lu, L. Liu, D. Shen, C. Yang, and L. Zhang, "Infrared study on in situ polymerization of zinc dimethacrylate in poly ( ${\alpha}$ -octylene-co-ethylene) elastomer", Polym. Int., 53, 802 (2004). 

    상세보기

47. Z. Peng, X. Liang, Y. Zhang, and Y. Zhang, "Reinforcement of EPDM by in situ prepared zinc dimethacrylate", J. Appl. Polym. Sci., 84, 1339 (2002). 

    상세보기

48. H. D. Chae, U. Basuli, J. H. Lee, C. I. Lim, R. H. Lee, S. C. Kim, N. D. Jeon, and C. Nah, "Study on Mechanical and Thermal Properties of Rubber Composites Reinforced by Zinc Methacrylate and Carbon Black", Polym. Compos., 2012, DOI 10.1002/pc.22242. 

    상세보기

49. S. Kaang, W. Jin, M. A. Kader, C. Nah, "Effects of blend composition and mixing method on mechanical and morphological properties of zinc dimethacrylate-reinforced acrylonitrile- butadiene copolymer nanocomposites.", Polym. Plast. Technol., 43, 1517 (2004). 

50. W. S. Kim, W. D. Kim, and S. I. Hong, "Fatigue life prediction of automotive rubber component subjected to a variable amplitude loading", Elastomer, 42, 209 (2007). 

51. C. Park and S. R. Nutt, "PM synthesis and properties of steel foams", Mater. Sci. Eng. A, 288, 111 (2000). 

    상세보기

52. T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi, T. G. Nieh, and K. Higashi, "Experimental study of energy absorption in a close-celled aluminum foam under dynamic loading", Scripta Mater., 40, 921 (1999). 

    상세보기

53. C. J. Yu, H. H. Eiferet, J. Banhart, and J. Baumeister, "Metal foams", Adv. Mater. Processes, 11, 45 (1998). 

저자의 다른 논문 :

이기쁨 (3) 허양일 (10) 나창운 (43)