최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기전자학회논문지 = Journal of IKEEE, v.16 no.4, 2012년, pp.328 - 334
홍익표 (Dept. of Information & Communication Engineering, Kongju National University) , 이인곤 (Dept. of Information & Communication Engineering, Kongju National University)
In this paper, we analyzed the electromagnetic characteristics of the spherical frequency selective surface with different arrangement of crossed dipole slot elements for reducing the RCS(radar cross section). The three dimensional MOM(method of moment) with RWG basis is used to analyze the proposed...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
주파수 선택적 표면(FSS, Frequency Selective Surface)구조란? | 도전성을 가지는 패치 또는 슬롯이 주기적으로 배열되어 특정 주파수만 투과시키거나 또는 반사시키는 특성이 있는 전자기구조를 주파수 선택적 표면(FSS, Frequency Selective Surface)구조라 한다. 이 주파수 선택적 표면 구조는 일반적으로 기본 단위요소의 형상과 크기, 배열 주기 및 배열 형상에 따라 전자기적 특성이 달라진다. | |
주파수 선택적 표면 구조의 전자기적 특성을 결정하는 인자들은 무엇인가? | 도전성을 가지는 패치 또는 슬롯이 주기적으로 배열되어 특정 주파수만 투과시키거나 또는 반사시키는 특성이 있는 전자기구조를 주파수 선택적 표면(FSS, Frequency Selective Surface)구조라 한다. 이 주파수 선택적 표면 구조는 일반적으로 기본 단위요소의 형상과 크기, 배열 주기 및 배열 형상에 따라 전자기적 특성이 달라진다. 특히, 이와 같은 주파수 선택적 표면 구조의 주파수 대역 통과 또는 차단 특성을 이용하면 특정한 레이더 신호를 흡수하거나 또는 반사시킬 수 있기 때문에 항공기, 미사일, 함정 등의 탐지가능성을 줄이기 위한 스텔스 기술과 관련하여 활발하게 연구가 이루어지고 있다. | |
RCS 저감 설계가 요구되는 표적에 적용하고자 하는 입체적인 형상에 따라서 RCS 특성의 변화 경향이 달라질 수 있다는 예측이 가능한 이유는? | 4GHz 이며, Type A와 Type B는 공진주파수와 통과대역에 대하여 차이를 보였으며, Type B, Type C는 통과대역에서 차이를 확인 할 수 있었다. 또한 그림 6 의 평면형 FSS 구조와 비교해보았을 때, 구형 FSS 구조는 공진주파수가 낮아지고, 통과대역이 좁아지는 경향을 보였다. 따라서 RCS 저감 설계가 요구되는 표적에 적용하고자 하는 입체적인 형상에 따라서 RCS 특성의 변화 경향이 달라질 수 있다는 예측이 가능하다. |
K. Y. Park, S. E. Lee, C. G. Kim and J. H. Han, "Fabrication and electromagnetic characteristics of electromagnetic wave absorbing sandwich structures," Compos. Sci. Technol. 66, pp. 576-584, 2006
T. Cwik and R. Mittra, "The effects of the Truncation and Curvature of Periodic Surfaces : A Strip Grating", IEEE Trans. on Antennas & Prop., Vol. 36, pp.612-622, May. 1988
B. Philips, E. A. Parker and R. J. Langley, "Ray Tracing Analysis of Transmission Performance of Curved FSS", IEE Proc. of Microwaves, Antennas & Prop., pp.193-200, 1995
D. Ding, S. Tao and R. Chen, "Fast analysis of finite and curved frequency selective surface using the VSIE with MLFMA", Int. J. Numer. Model., Vol.24, pp.425-436, 2010
Stupfel B., and Pion. Y, "Impedance Boundary Conditions for Finite Planar and Curved Frequency Selective Surfaces", IEEE Trans. on Antennas & Prop., Vol. 53, pp.1415-1425, 2005
Z. Sipus, Analysis of Curved Frequency Selective Surfaces, Final Report of EOARD, 2008
I. M. Ehrenberg, S. E. Sarma and B. I. Wu, "Fully Conformal FSS vis Rapid 3D Prototyping", 2012 IEEE APS International Symposium, 2012.
J. H. Lee, K. H. Cho, S. J. Oh, H. Y. Sim, I.S.Seo and K. H. Kim, "Study on Transmission and Reflection Characteristics of Curved Frequency Selective Surface", 2007 Korea Electronics Engineering Society Conference., pp.273-274, 2007.
J. H. Lee, S. J. Oh, I. S. Seo and K. H. Kim, "Measurement method of Curved FSS Screen and Analysis of Frquency Characteristics of Curved FSS Screen", 2007 Korea Electronics Engineering Society Conference., pp.271-272, 2007.
S. Rao, D. Wilton, and A. Glisson, "Electromagnetic scattering by surfaces of arbitrary shape", IEEE Trans. on Antennas & Prop., vol. 30, pp. 409-418, May. 1982
Walton C. Gibson, The Method of Moments in Electromagnetics, Chapman & Hall/CRC, 2008
E. Topsakal, R.Kindt, K. Sertel and J. Volakis, "Evaluation of the BICGSTAB(l) Algorithm for the Finite-Element/Boundary-Integral Method", IEEE Antennas and Propagation Magazine, Vol. 43, No.6, Dec. 2001
http://www.em-hobbies.com
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.