최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주거학회 논문집 = Journal of the Korean Housing Association, v.23 no.1, 2012년, pp.27 - 41
성윤복 (한국건설교통기술평가원) , 여명석 (서울대학교 건축학과) , 구소영 (서울대학교 건설환경종합연구소) , 김광우 (서울대학교 건축학과)
The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradi...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
건물에서 유리를 이용한 외피 개구 면적의 증가의 긍정적 효과는? | 건물에서 유리를 이용한 외피 개구 면적의 증가는 건물 내부로의 주광과 복사열 유입을 증가시킴으로써 건물환경 성능에 긍정적·부정적인 효과를 동반한다. 긍정적인 효과로는 실내의 주광 유입과 조도 증가로 인한 조명 에너지 절약, 외부로의 시야확보 및 개방감 향상, 자연 광원의 도입으로 인한 재실자의 심리적 안정감 향상, 실내 태양 복사열 유입 증가로 난방기 난방 부하 저감을 기대할 수 있다. 반면, 부정적인 효과로는 재실공간에서 직접적인 태양광 유입으로 과도한 휘도 차에 따른 현휘 발생, 냉방기 태양 복사열 유입 증대로 인한 냉방 부하 증가의 문제를 초래하게 된다. | |
태양 프로파일각이란? | 태양 프로파일각은 태양 고도, 태양 방위각, 건물의 향, 시간의 정보가 종합적으로 고려되어 실제 면에 유입되는 태양 입사각으로, 기존 문헌(Kim, 2007; Tzempelikos, 2008; 金會瑞, 1986)에 따르면 건물 수직면에서의 태양광의 유입 여부는 이를 기준으로 판단함이 타당한 것으로 보고되고 있다. 태양 프로파일각이 0o에서 90o 사이의 범위에 나타나는 구간에서만 블라인드를 제어할 필요성이 있으며 나머지 시간대에서는 블라인드를 모두 올려 최대한 주광과 일사를 활용하는 것이 바람직하다. | |
블라인드가 일정한 시간 간격의 스텝 제어로 운전되는 이유는? | 블라인드는 모터 및 기기동작 특성으로 인하여 일정한 시간 간격의 스텝 제어로 운전된다. 제어시간간격이 짧아질수록 동작량은 작아져 외부로의 개방 면적이 증가하여 주광·일사 유입이 증가하지만, 재실자는 잦은 동작으로 인한 심리적 불안감을 느낀다. |
Bulow-Hube, H. (2001). Energy-efficient window systems: Effects on energy use and daylight in buildings. Ph. D. dissertation, Lunds University, Sweden.
Chauvel, P., Collins, J.B. Dogniaux, R. Longmore, J. (1982). Glare from windows: current views of problem. Lighting Research and Technology 14(1), 31-46.
Guillemin, A. and Morel, S. (2002). An energy-efficient controller for shading devices self-adapting to the user wishes. Building and Environment, 37(11), 1091-1097.
Kim, B., & Kim, J. (2006). Automatic control strategy of venetian blind for improvement of environmental performance in office buildings. Conference Proceeding of the Korea Institute of Ecological Architecture and Environment, 237-241.
Kim, J. (2007). Automatic control strategy of venetian blind for improvement of environmental performance in office buildings. Ph. D. dissertation, Seoul National University, Seoul.
Koo, S. (2011). Optimum Blind Control to Maximize Solar Heat Gain Preventing Glare on Workplane. Ph. D. dissertation, Seoul National University, Seoul.
Koo, S., Yeo, M., & Kim, K. (2010). Automated blind control to maximize the benefits of daylight in buildings. Building and Environment, 45(6), 1508-1520.
Ku, H. (2009). Automated blind control algorithm from control frequency based on user preference. Master's thesis, Seoul National University, Seoul.
Lindsay, C.R.T. & Littlefair, P.J. (1992). Occupant Use of Venetian Blinds in Offices. Building Research Establishment (BRE).
Osterhaus, W.K.E. (2005). Discomfort glare assessment and prevention for daylight applications in office environments. Solar Energy, 79(2), 140-158.
Paik, J., Kim, J., Yeo, M., & Kim, K. (2006). A study on the occupants use of the blinds in office building. Journal of the Architectural Institute of Korea: Planning & Design, 22(12), 311-318.
Raja, I.A., Nicol, J.F., McCartney, K.J., & Humphreys, M.A. (2001). Thermal comfort: Use of controls in naturally ventilated buildings. Energy and Buildings, 33(3), 235-244.
Rea, M. (1984). Window blind occlusion: a pilot study. Building and Environment, 19(2), 133-137.
Reinhart, C. F. (2004). Lightswitch-2002: a model for manual and automated control of electric lighting and blinds. Solar Energy, 77(1), 15-28.
Tzempelikos, A. (2008). The impact of venetian blind geometry and tilt angle on view, direct light transmission and interior illuminance. Solar Energy, 82(12), 1172-1191.
金會瑞. (1986). ル一バ一型日射遮蔽裝置の採光特性に關する硏究. 博士論文, 國立京都大學.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.