최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, v.18 no.3, 2012년, pp.224 - 229
곽동훈 (인하대학교 로봇공학과) , 김태한 (인하대학교 로봇공학과) , 이영삼 (인하대학교 로봇공학과)
In this paper, we propose a correction method for astronomical telescope using recursive least square method. There are two ways to move a telescope : equatorial operation and altazimuth operation. We must align polar axis of a equatorial telescope with the north celestial pole and adjust the horizo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
천체 망원경을 구동하는 방식에 따른 특징은 무엇인가? | 천체 망원경을 구동하는 방식에는 적도의식과 경위대식이 있다. 적도의식 망원경은 적도 좌표계를 이용하며, 천구상의 각 천체의 적위와 적경을 따라 구동된다. 경위대식 망원경은 지평 좌표계를 이용하며, 관측자의 위치에 따른 각 천체의 고도와 방위각을 따라 구동된다[1]. 추적 정밀도를 높이기 위해서 두 가지 방식 모두, 관측을 시작하기 전에 관측 시의 천체 좌표계와 망원경 좌표계를 일치시켜야 하는 보정 작업을 수행해야 한다. 현재 시중에 판매되고 있는 천체 망원경은 보정을 위해 지자기 센서와 가속도 센서, 극축 망원경을 별도로 제공한다. | |
천체 망원경이란 무엇인가? | 천체 망원경은 지구 외의 천체를 관측하는 장비로서 행성 관측, 항성 관측, 소행성 탐사 등에 이용된다. 대부분의 천체는 낮은 광도를 가지고 있기 때문에, 안시 관측으로는 천체의 변화를 관측하기 어렵다. | |
천체 망원경을 구동하는 방식은 무엇이 있는가? | 천체 망원경을 구동하는 방식에는 적도의식과 경위대식이 있다. 적도의식 망원경은 적도 좌표계를 이용하며, 천구상의 각 천체의 적위와 적경을 따라 구동된다. |
D. Scott Birney, Observational Astronomy, Cambridge University Press, 1991.
Y. Yang, N. Rees, and T. Chuter, "Reduction of encoder measurement errors in UKIRT telescope control system using a Kalman filter," IEEE Trans. of Control Systems Technology, vol. 10, no. 1, pp. 149-157, Jan. 2002.
W. S. Jeong, "Development of control softwares for improvement of tracking efficiency of the 16" telescope of seoul national university observatory," Publications of The Korean Astronomical Society (in Korean), vol. 14, no. 1, pp. 47-56, Sep. 1999.
T. Erm and S. Sandrock, "Adaptive correction of periodic errors improves telescope performance," Proc. 2005 American Control Conference, vol. 6, pp. 3776-3777, Jun. 2005.
Y. W. Kang, "Automation of astronomical telescope: development of techniques, equipments and softwares for remote control of telescope," Publications of The Korean Astronomical Society (in Korean), vol. 11, no. 1, pp. 57-73, Jul. 1996.
H. S. Kim, "Development of remote control system for KNUO 16" reflector telescope," Jour. Korean Earth Science Society (in Korean), vol. 24, no. 5, pp. 456-466, Aug. 2003.
I. W. Han, "Development of a telescope control system, MS-TCS," Publications of The Korean Astronomical Society (in Korean), vol. 13, no. 1, pp. 85-98, Dec. 1998.
J. H. Lee, "Automatic control of equatorial mount using a CCD camera," Journal of the Institute of Industrial technology (in Korean), vol. 13, pp. 97-102, 2005.
Edwin K. P. Chong, An Introduction to Optimization 3rd Ed., Wiley-Interscience, 2008.
Atmel Corporation 2009, ATmega128A Datasheet
Z. Zhang, "A flexible new technique for camera calibration," IEEE Trans. on Pattern Analysis and Machine Intelligence, vol. 13, no. 4, pp. 376-380, Apr. 1991.
S. Umeyama, "Least-square estimation of transformation parameters between two point patterns," Microsoft Research Technical Report MSR-TR-98-71, Dec. 1998.
M. D. Shuster and S. D. Oh, "Three-axis attitude determination from vector observations," Journal of Guidance, Control and Dynamics, vol. 4, no. 1, pp. 70-77, Jan. 1981.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.