최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.50 no.3, 2012년, pp.562 - 566
윤의진 (한국에너지기술연구원 연료전지연구센터) , 이종원 (한국에너지기술연구원 연료전지연구센터) , 이승복 (한국에너지기술연구원 연료전지연구센터) , 임탁형 (한국에너지기술연구원 연료전지연구센터) , 박석주 (한국에너지기술연구원 연료전지연구센터) , 송락현 (한국에너지기술연구원 연료전지연구센터) , 신동렬 (한국에너지기술연구원 연료전지연구센터) , 한규승 (충남대학교 바이오 응용화학과)
A novel design of tubular segmented-in-series(SIS) solid oxide fuel cell (SOFC) sub module was presented in this paper. The tubular ceramic support was fabricated by the extrusion technique. The NiO-YSZ anode and the yttria-stabilized zirconia (YSZ) electrolyte were deposited onto the ceramic suppor...
Tompsett, G. A., Finnerty, C., Kendall, K., Alston, T. and Sammes, N. M., "Novel Applications for Micro SOFCs," J. Power Sources, 86, 376-382(2000).
Singhal, S. C., "Solid Oxide Fuel Cells for Stationary, Mobile, and Military Applications," Solid State Ionics, 152, 405(2002).
Wang, J., Lu, Z., Huanga, X., Chena, K., Ai, N., Hua, J. and Su, W., "YSZ Films Fabricated by a Spin Smoothing Technique and Its Application in Solid Oxide Fuel Cell," J. Power Sources, 163, 957(2007).
Sammes, N. M., Du, Y. and Bove, R., "Design and Fabrication of a 100W Anode Supported Micro-tubular SOFC Stack," J. Power Sources, 145, 428(2005).
Gardner, F. J., Day, M. J., Brandon, N. P., Pashley, M. N. and Cassidy, M., "SOFC Technology Development at Rolls-Royce," J. Power Sources, 86, 122-129(2000).
Costamagna, P., Selimovic, A., Borghi, M. D. and Agnew, G., "Electrochemical Model of the Integrated Planar Solid Oxide Fuel Cell (IP-SOFC)," Chem. Eng. J., 102, 61-69(2004).
Lai, T. S., Scott, A. and Barnett, "Design Considerations for Segmented-in-series Fuel Cells," J. Power Sources, 147, 85-94(2005).
Yun, U. J., Lee, J. W., Lee, S. B., Lim, T. H., Park, S. J., Song, R. H. and Han, K. S., "Evaluation of Properties and Fabrication of Tubular Supports Segmented-in-series Solid Oxide Fuel Cell (SOFC)," Korean Hydrogen and New Energy Society, 21, 214-219(2010).
Lee, D. S., Lee, J. H., Kim, J., Lee, H. W. and Song, H. S., "Tuning of Microstructure and Electrical Properties of SOFC Anode Via Compaction Pressure Control During Forming," Solid State Ionics., 166, 13-17(2004).
Wanzenberg, E., Tietz, F., Kek, D., Panjan, P. and Stver, D., "Infuence of Electrode Contacts on Conductivity Measurements of Thin YSZ Films and Impact on Solid Oxide Fuel Cells," Solid State Ionics., 164, 121-129(2003).
Serincan, M. F., Pasaogullari, U. and Sammes, N. M., "Effects of Operating Conditions on the Performance of a Micro-tubular Solid Oxide Fuel Cell(SOFC)," J. Power Source, 192, 414-422(2009).
Ding, J. and Liu, J., "A Novel Design and Performance of Cone-shaped Tubular Anode-supported Segmented-in-series Solid Oxide Fuel Cell Stack," J. Power Source, 193, 769-773(2009).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.