$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

고분자 전해질 연료전지용 유.무기 복합막의 연구개발동향
Research Trend of Organic/Inorganic Composite Membrane for Polymer Electrolyte Membrane Fuel Cell 원문보기

멤브레인 = Membrane Journal, v.22 no.3, 2012년, pp.155 - 170  

김득주 (경상대학교 나노신소재공학과, 공학연구원, 아이큐브 사업단) ,  남상용 (경상대학교 나노신소재공학과, 공학연구원, 아이큐브 사업단)

초록
AI-Helper 아이콘AI-Helper

연료전지는 석유엔진과 비교하여 높은 전류밀도와 효율성, 그리고 친환경적이기 때문에 21세기 들어 대체 발전시스템으로서 각광받아왔다. 연료전지 시스템에서 고분자 전해질 막은 핵심부품으로써 현재 Nafion막이 연료전지시스템에서 사용 중이지만 높은 제조단가와 고온에서 낮은 전도도를 가지는 단점을 가지고 있다. 그러므로 많은 학자들이 낮은 제조단가, 높은 물리적 특성들을 달성하기 위한 연구를 진행하여 왔으며 연료전지의 상용화와 동시에 고성능의 연료전지의 개발을 위하여 많은 방법들이 개발되어 왔다. 그중, 유무기 복합막은 유기물과 무기물의 물성을 균일하게 조합할 수 있으므로 잠재성을 가지고 있는 제조방법이다. 본고에서는 다양한 무기물이 사용되어 제조된 유무기 복합막의 연구동향에 대하여 조사하였다.

Abstract AI-Helper 아이콘AI-Helper

Fuel cells have been considered as alternative power generation system in the twenty-first century because of eco-friendly system, high power density and efficiency compare with petroleum engine system. Proton exchange membranes (PEMs) are the key components in fuel cell system. Currently, Nafion ha...

주제어

참고문헌 (42)

  1. M. Rikukawa and K. Sanui, "Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers", Prog. Polym. Sci., 25, 1463 (2000). 

  2. D. J. Kim, H. Y. Hwang, and S. Y. Nam, "Characterization of hybrid membranes made from sulfonated poly(arylene ether sulfone) and vermiculite with high cation exchange capacity for DMFC applications", Membrane Journal, 21, 389 (2011). 

  3. M. A. Hickner, H. Ghassemi, Y. S. Kim, B. R. Einsla, and J. E. McGrath, "Alternative polymer systems for proton exchange membranes (PEMs)", Chem. Rev., 104, 4587 (2004). 

  4. J. Y. Park, J. k. Choi, K. J. Choi, T. S. Hwang, H. J. Kim, and Y. T. Hong, "Effects of Mixed Casting Solvents on Morphology and Characteristics of Sulfonated Poly (aryl ether sulfone) Membranes for DMFC Applications", Membrane Journal, 18, 282 (2008). 

  5. K. D. Kreuer, "On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells", J. Membr. Sci., 185, 29 (2001). 

  6. K. S. Yoon, J. H. Choi, J. K. Choi, S. K. Hong, Y. T. Hong, and H. S. Byun, "Fabrication and characteristics of partially covalent-crosslinked polys (arylene ether sulfone) for Use in a Fuel Cell", Membrane Journal, 18, 274 (2008). 

  7. S. J. Hamrock and M. A. Yandrasits, "Proton exchange membranes for fuel cell applications", J. Macromol. Sci., Part C: Polymer Reviews, 46, 219 (2006). 

  8. M. Amjadi, S. J. Peighambardoust, S. Rowshanzamir, and S. Sedghi, "Preparation, characterization and cell performance of durable Nafion/ $SiO_2$ hybrid membrane for high-temperature polymeric fuel cells", J. Power Sources, 210, 350 (2012). 

  9. T. Xu, J. J. Woo, S. J. Seo, and S. H. Moon, "In situ polymerization: A novel route for thermally stable proton-conductive membranes", J. Membr. Sci., 325, 209 (2008). 

  10. J. Joseph, C. Y. Tseng, and B. J. Hwang, "Phosphonic acid-grafted mesostructured silica/Nafion hybrid membranes for fuel cell applications", J. Power Sources, 196, 7363 (2011). 

  11. M. Linlin, A. K. Mishra, N. H. Kim, and J. H. Lee, "Poly (2, 5-benzimidazole)-silica nanocomposite membranes for high temperature proton exchange membrane fuel cell", J. Membr. Sci., 411, 91 (2012). 

  12. Y. N. Chang, J. Y. Lai, and Y. L. Liu, "Polybenzimidazole (PBI)-functionalized silica nanoparticles modified PBI nanocomposite membranes for proton exchange membranes fuel cells", J. Membr. Sci., 403, 1 (2012). 

  13. S. Y. So, Y. J. Yoon, T. H. Kim, K. Yoon, and Y. T. Hong, "Sulfonated poly(arylene ether sulfone)/ functionalized silicate hybrid proton conductors for high-temperature proton exchange membrane fuel cells", J. Membr. Sci., 381, 204 (2011). 

  14. U. Thanganathan, Y. Nishina, K. Kimura, S. Hayakawa, and R. Bobba, "Characterization of hybrid composite membrane based polymer/precursor/ $SiO_2$ ", Mater. Lett., 81, 88 (2012). 

  15. T. Uma and M. Nogami, "Synthesis of mixed composite membranes based polymer/HPA : electrochemical performances on low temperature PEMFCs", J. Membr. Sci., 411, 109 (2012). 

  16. J. R. Lee, J. H. Won, N. Y. Kim, M. S. Lee, and S. Y. Lee, "Hydrophilicity/porous structure-tuned, $SiO_2$ /polyetherimide-coated polyimide nonwoven porous substrates for reinforced composite proton exchange membranes", J. Colloid Interface Sci., 362, 607 (2011). 

  17. R. Padmavathi, R. Karthikumar, and D. Sangeetha, "Multilayered sulphonated polysulfone/silica composite membranes for fuel cell applications", Electrochim. Acta., 71, 283 (2012). 

  18. N. N. Krishnan, D. Henkensmeier, J. H. Jang, H. J. Kim, V. Rebbin, I. H. Oh, S. A. Hong, S. W. Nam, and T. H. Lim, "Sulfonated poly (ether sulfone)- based silica nanocomposite membranes for high temperature polymer electrolyte fuel cell applications", Int. J. Hydrogen Energy., 36, 7152 (2011). 

  19. S. K. Bhattacharya, "Metal-filled polymers : properties and applications", vol. 11 : CRC (1986). 

  20. F. J. Pinar, P. Canizares, M. A. Rodrigo, D. Ubeda, and J. Lobato, "Titanium composite PBIbased membranes for high temperature polymer electrolyte membrane fuel cells. Effect on titanium dioxide amount", RSC Adv., 2, 1547 (2012). 

  21. J. Lobato, P. Canizares, M. A. Rodrigo, D. Ubeda, and F. J. Pinar, "A novel titanium PBI-based composite membrane for high temperature PEMFCs", J. Membr. Sci., 369, 105 (2011). 

  22. Q. Li, C. Xiao, H. Zhang, F. Chen, P. Fang, and M. Pan, "Polymer electrolyte membranes containing titanate nanotubes for elevated temperature fuel cells under low relative humidity", J. Power Sources, 196, 8250 (2011). 

  23. J. Jaafar, A. F. Ismail, and T. Matsuura, "Effect of dispersion state of $Cloisite15A^{(R)}$ on the performance of SPEEK/Cloisite15A nanocomposite membrane for DMFC application", J. Appl. Polym. Sci., 124, 969 (2012). 

  24. S. Ghosh, A. Sannigrahi, S. Maity, and T. Jana, "Role of clays structures on the polybenzimidazole nanocomposites : potential membranes for the use in polymer electrolyte membrane fuel cell", J. Phys. Chem. C, 115, 11474 (2011). 

  25. V. T. Magalad, S. S. Pattanashetti, G. S. Gokavi, M. N. Nadagouda, and T. M. Aminabhavi, "Proton conducting properties of nanocomposite membranes of chitosan", Chem. Eng. J., 189, 1 (2012). 

  26. D. J. Kim, H. Y. Hwang, S. Y. Nam, and Y. T. Hong, "Characterization of a composite membrane based on SPAES/Sulfonated montmorillonite for DMFC application", Macromol. Res., 20, 21 (2012). 

  27. D. J. Kim, H. Y. Hwang, and S. Y. Nam, "Sulfonated poly (arylene ether sulfone)/Laponite- $SO_3H$ composite membrane for direct methanol fuel cell", Journal of Industrial and Engineering Chemistry, 18, 556 (2012). 

  28. S. S. Madaeni, S. Amirinejad, and M. Amirinejad, "Phosphotungstic acid doped poly (vinyl alcohol)/ poly (ether sulfone) blend composite membranes for direct methanol fuel cells", J. Membr. Sci., 380, 132 (2011). 

  29. Y. Xiang, M. Yang, J. Zhang, F. Lan, and S. Lu, "Phosphotungstic acid (HPW) molecules anchored in the bulk of Nafion as methanol-blocking membrane for direct methanol fuel cells", J. Membr. Sci., 368, 241 (2011). 

  30. M. Amirinejad, S. S. Madaeni, E. Rafiee, and S. Amirinejad, "Cesium hydrogen salt of Heteropolyacids/ Nafion nanocomposite membranes for proton exchange membrane fuel cells", J. Membr. Sci., 377, 89 (2011). 

  31. Z. Cui, W. Xing, C. Liu, J. Liao, and H. Zhang, "Chitosan/heteropolyacid composite membranes for direct methanol fuel cell", J. Power Sources, 188, 24 (2009). 

  32. A. C. Cole, J. L. Jensen, I. Ntai, K. L. T. Tran, K. J. Weaver, D. C. Forbes, and J. H. Davis Jr, "Novel Bronsted acidic ionic liquids and their use as dual solvent-catalysts", J. Am. Chem. Soc., 124, 5962 (2002). 

  33. T. Sato, T. Maruo, S. Marukane, and K. Takagi, "Ionic liquids containing carbonate solvent as electrolytes for lithium ion cells", J. Power Sources, 138, 253 (2004). 

  34. E. A. Mistri, A. K. Mohanty, and S. Banerjee, "Synthesis and characterization of new fluorinated Poly (ether imide) copolymers with controlled degree of sulfonation for proton exchange membranes", J. Membr. Sci., 119, 117 (2011). 

  35. J. T. W. Wang and S. L. C. Hsu, "Enhanced high-temperature polymer electrolyte membrane for fuel cells based on polybenzimidazole and ionic liquids", Electrochim. Acta., 56, 2842 (2011). 

  36. W. Li, F. Zhang, S. Yi, C. Huang, H. Zhang, and M. Pan, "Effects of casting solvent on microstructrue and ionic conductivity of anhydrous sulfonated poly (ether ether ketone)-inoic liquid composite membranes", Int. J. Hydrogen Energy, 37, 748 (2012). 

  37. F. Chu, B. Lin, F. Yan, L. Qiu, and J. Lu, "Macromolecular protic ionic liquid-based proton-conducting membranes for anhydrous proton exchange membrane application", J. Power Sources, 196, 7979 (2011). 

  38. T. W. Kim, M. Sahimi, and T. T. Tsotsis, "Hybrid hydrotalcite-sulfonated poly(ether ether ketone) cation exchange membranes prepared by in situ sulfonation", Ind. Eng. Chem. Res., 50, 3880 (2011). 

  39. L. Nie, J. Wang, T. Xu, H. Dong, H. Wu, and Z. Jiang, "Enhancing proton conduction under low humidity by incorporating core-shell polymeric phosphonic acid submicrospheres into sulfonated poly (ether ether ketone) membrane", J. Power Sources, 213, 1, (2012). 

  40. V. S. Rangasamy, S. Thayumanasundaram, N. De Greef, J. W. Seo, and J. P. Locquet, "Preparation and characterization of composite membranes based on sulfonated PEEK and $AlPO_4$ for PEMFCs", Solid State Ionics, 216, 83 (2012). 

  41. Y. Gao, W. Li, W. C. L. Lay, H. G. L. Coster, A. G. Fane, and C. Y. Tang, "Characterization of forward osmosis membranes by electrochemical impedance spectroscopy", Desalination, In Press. 

  42. F. Xu, S. Mu, and M. Pan, "Mineral nanofibre reinforced composite polymer electrolyte membranes with enhanced water retention capability in PEM fuel cells", J. Membr. Sci., 377, 134 (2011). 

저자의 다른 논문 :

LOADING...
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로