최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국섬유공학회지 = Textile science and engineering, v.49 no.6, 2012년, pp.429 - 434
오도향 (KPX케미칼(주)) , 백영미 (부산대학교 한국전통복식연구소) , 안승국 (부산대학교 유기소재시스템공학과)
The purpose of this study is to improve interfacial adhesion strength of carbon fiber reinforced hybrid composites by physical and chemical treatment. Ultrasonic irradiation was used as physical and chemical treatment relatively. The morphologies of fracture-section and surface of carbon fiber fabri...
S. R. Na and J. S. Park, "The Influence of Stacking Sequences of Carbon Fiber/Glass Fiber/PEEK Hybrid Composites on the Mechanical Properties", J Korean Fiber Soc, 2003, 40, 232-237.
W. K. Choi, B. J. Kim, B. G. Min, K. M. Bae, and S. J. Park, "Effects of Sizing Treatment of Carbon Fibers on Mechanical Interfacial Properties of Nylon 6 Matrix Composites", Elastomers and Composites, 2010, 45, 2-6.
G. C. Huang, C. H. Lee, and J. K. Lee, "Thermal and Mechanical Properties of Short Fiber-Reinforced Epoxy Composites", Polymer(Korea), 2009, 33, 530-536.
S. K. Cheong, "Interlaminar Fracture Toughness of CFRP Laminates with Carbon Non-Woven Tissue Having Different Weights", The Korean Soc Compos Mater, 2009, 22, 43-48.
M. L. Benzeggagh and S. Benmedakhene, “Residual Strength of a Glass/Polypropylene Composite Material Subjected to Impact”, Compos Sci Technol, 1995, 55, 1-11.
S. Y. Fu, X. Hu, and C. Y. Yue, “The Flexural Modulus of Misaligned Short-fiber-reinforced Polymers”, Compos Sci Technol, 1999, 59, 1533-1542.
Y. Thomas, J. P. Parisi, and B. Boutevin, “Improvement of Fibre/Matrix Bonding in Carbon-fibre/Acrylic Composites by Electron-irradiation: Concept of Difunctional Chemical Coupling Agent”, Compos Sci Technol, 1994, 52, 299-307.
J. W. Kong, S. S. Chung, J. S. Park, and T. W. Kim, "Manufacture and Mechanical Properties of Carbon Nanofiber Reinforced Hybrid Composites", The Korean Soc Compos Mater, 2005, 18, 1-6.
J. Shi, Y. Wang, Y. Gao, and H. Bai, “Effects of Coupling Agents on the Impact Fracture Behaviors of T-ZnOw/PA6 Composites”, Compos Sci Technol, 2008, 68, 1338-1347.
A. P. Mouritz, J. Gallagher, and A. A. Goodwin, “Flexural Strength and Interlaminar Shear Strength of Stitched GRP Laminates Following Repeated Impacts”, Compos Sci Technol, 1997, 57, 509-522.
C. Li and T. W. Chou, “Multiscale Modeling of Compressive Behavior of Carbon Nanotube/Polymer Composites”, Compos Sci Technol, 2006, 66, 2409-2414.
Z. Zhou, S, Wang, L. Lu, Y. Zhang, and Y. Zhang, “Functionalization of Multi-wall Carbon Nanotubes with Silane and Its Reinforcement on Polypropylene Composites”, Compos Sci Technol, 2008, 68, 1727-1733.
A. H. Perez, F. Aviles, A. M. Pat, A. V. Gonzalez, P. J. Franco, and P. B. Perez, “Effective Properties of Multiwalled Carbon Nanotube/Epoxy Composites Using Two Different Tubes”, Compos Sci Technol, 2008, 68, 1422-1431.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.