참고문헌 (40)

1. International Journal of Refrigeration L. O. S. Buzelina 28 165 2005 10.1016/j.ijrefrig.2004.08.013 L. O. S. Buzelina, S. C. Amicoa, J. V. C. Vargasa and J. A. R. Parise, Experimental development of an intelligent refrigeration system, International Journal of Refrigeration, 28 (2005) 165-175. 

   상세보기

2. 10.6028/NIST.IR.5606 P. A. Domanski, Theoretical evaluation of the vapor compression cycle with a liquid-line/suction-line heat exchanger, economizer, and ejector, NIST Report: NISTIR5606 (1995). 

   

3. International Journal of Air-Conditioning and Refrigeration J. H. Heo 16 77 2008 J. H. Heo, M. W. Jeong, J. U. Jeon and Y. C. Kim, Effects of gas injection on the heating performance of a two-stage heat pump using a twin rotary compressor with refrigerant charge amount, International Journal of Air-Conditioning and Refrigeration, 16 (2008) 77-82. 

4. E. Dirik, C. Inan and M. Y. Tanes, Numerical and experimental studies on adiabatic and non-adiabatic capillary tubes with R-134a, International Refrigeration Conference at Purdue, West Lafayette, Indiana, USA (1994). 

5. M. M. Mezavila and C. Melo, CAPHEAT: a homogeneous model to simulate refrigerant flow through non-adiabatic capillary tubes, International Refrigeration Conference at Purdue, West Lafayette, Indiana, USA (1996). 

6. Int J Refrigeration P. K. Bansal 19 497 1996 10.1016/S0140-7007(96)00044-8 P. K. Bansal and A. S. Rupasinghe, An empirical model for sizing capillary tubes, Int J Refrigeration, 19 (1996) 497-505. 

   상세보기

7. International Journal of Air-Conditioning and Refrigeration J. M. Choi 12 192 2004 J. M. Choi, Y. H. Jang and Y. C. Kim, A generalized correlation and rating charts for mass flow rate through capillary tubes with several alternative refrigerants, International Journal of Air-Conditioning and Refrigeration, 12 (2004) 192-197. 

   원문보기 상세보기

8. Appl Thermal Eng G. Valladares 22 173 2002 10.1016/S1359-4311(01)00074-6 G. Valladares, C. D. Perez-Sagarra and A. Oliva, Numerical simulation of capillary expansion devices behaviour with pure and mixed refrigerants considering metastable region, Part I: mathematical formulation and numerical model, Appl Thermal Eng, 22 (2002) 173-182. 

   상세보기

9. Appl Thermal Eng B. Xu 22 1801 2002 10.1016/S1359-4311(02)00110-2 B. Xu and P. K. Bansal, Non-adiabatic capillary tube flow: A homogeneous model and process description, Appl Thermal Eng, 22 (2002) 1801-1819. 

   상세보기

10. Internal Journal of Energy Research S. Wongwises 27 93 2003 10.1002/er.860 S. Wongwises and M. Suchatawut, A simulation for predicting the refrigerant flow characteristics including metastable region in adiabatic capillary tubes, Internal Journal of Energy Research, 27 (2003) 93-109. 

    상세보기

11. International Journal of Refrigeration G. Valladares 30 642 2007 10.1016/j.ijrefrig.2006.08.015 G. Valladares, Numerical simulation of non-adiabatic capillary tubes considering metastable region, Part I: Mathematical formulation and numerical model, International Journal of Refrigeration, 30 (2007) 642-653. 

    상세보기

12. Appl Thermal Eng P. K. Bansal 25 3187 2005 10.1016/j.applthermaleng.2005.03.005 P. K. Bansal and C. Yang, Reverse heat transfer and recondensation phenomena in non-adiabatic capillary tubes, Appl Thermal Eng, 25 (2005) 3187-3202. 

    상세보기

13. C. C. Hiller and L. R. Glicksman, Improving heat pump performance via compressor capacity control-Analysis and test, MIT EL 76-001. Energy Laboratory, Massachusetts Institute of Technology, Vol. I and II (1976). 

14. S. K. Fischer and C. K. Rice, The oak ridge heat pump models: 1 A steady-state computer design model for air to air heat pumps, ORNL/CON-80/R1, Oak Ridge National Lab (1980). 

15. P. A. Domanski, Computer modeling and prediction of performance of an air source heat pump with a capillary tube, Ph.D. Dissertation, The Catholic Univ. of America (1982). 

16. Energy Conservation Management J. W. MacArthur 24 49 1984 10.1016/0196-8904(84)90051-7 J. W. MacArthur, Theoretical analysis of the dynamic interactions of vapor compression heat pumps, Energy Conservation Management, 24 (1984) 49-66. 

    상세보기

17. Appl Thermal Eng J. M. Gonçalves 29 1622 2009 10.1016/j.applthermaleng.2008.07.021 J. M. Gonçalves, C. Melo and C. J. L. Hermes, A semiempirical model for steady-state simulation of household refrigerators, Appl Thermal Eng, 29 (2009) 1622-1630. 

    상세보기

18. International Journal of Refrigeration C. Zhang 27 17 2004 10.1016/S0140-7007(03)00117-8 C. Zhang and G. Ding, Approximate analytic solutions of adiabatic capillary tube, International Journal of Refrigeration, 27 (2004) 17-24. 

    상세보기

19. International Journal of Refrigeration C. J. L. Hermes 31 1358 2008 10.1016/j.ijrefrig.2008.04.002 C. J. L. Hermes, C. Melo and J. M. Gonçalves, Modeling of non-adiabatic capillary tube flows: A simplified approach and comprehensive experimental validation, International Journal of Refrigeration, 31 (2008) 1358-1367. 

    상세보기

20. Int. J. of Air-Conditioning and Refrigeration D. Sarker 18 131 2010 10.1142/S201013251000023X D. Sarker, L. Kim, K. Son and J. H. Jeong, An evaluation of constituent correlations for predicting refrigerant characteristics in adiabatic capillary tubes, Int. J. of Air-Conditioning and Refrigeration, 18 (2010) 131-139. 

    원문보기 상세보기

21. Heat and Mass Transfer L. Kim 47 163 2011 10.1007/s00231-010-0697-0 L. Kim, K. Son, D. Sarker, J. H. Jeong and S. H. Lee, An assessment of models for predicting refrigerant characteristics in adiabatic and non-adiabatic capillary tubes, Heat and Mass Transfer, 47 (2011) 163-180. 

    상세보기

22. ASHRAE Trans A. E. Dabiri 87 771 1981 A. E. Dabiri and C. K. Rice, A compressor simulation method with corrections for the level of suction gas superheat, ASHRAE Trans, 87 (1981) 771-782. 

23. ASHRAE Trans P. A. Domanski 98 793 1991 P. A. Domanski, Simulation of an evaporator with nonuniform one-dimensional air distribution, ASHRAE Trans, 98 (1991) 793-802. 

24. International Journal of Refrigeration T. H. Lee 44 1767 2001 T. H. Lee, J. Y. Yun, J. S. Lee, J. J. Park and K. S. Lee, Determination of airside heat transfer coefficient on wire-ontube type heat exchanger, International Journal of Refrigeration, 44 (2001) 1767-1776. 

25. A. Zukauskas 1985 Heat transfer of a cylinder in cross flow A. Zukauskas and J. Ziugzda, Heat transfer of a cylinder in cross flow, Hemisphere Publishing, Washington DC (1985). 

26. International Journal of Chemical Engineering V. Gneilinski 16 359 1976 V. Gneilinski, New equations for heat and mass transfer in turbulent pipe and channel flow, International Journal of Chemical Engineering, 16 (1976) 359-368. 

27. M. K. Dobson, J. C. Chato, J. P. Wattelet, J. A. Gaibel, M. Ponchner, P. J. Kenney, R. L. Shimon, T. C. Villanueva, N. L. Rhines, K. A. Sweeney, D. G. Allen and T. T. Hershberger, Heat transfer and flow regimes during condensation in horizontal tubes, TR-57, ACRC (1994). 

28. 10.1201/9781420037579 R. Radermacher and Y. Hwang, Vapor compression heat pumps with refrigerant mixtures, CRC Press (2005). 

    

29. International Journal of Refrigeration J. R. Garcia-Cascales 33 135 2010 10.1016/j.ijrefrig.2009.08.013 J. R. Garcia-Cascales, F. Vera-Garcia, J. Gonzalvez-Macia, J. M. Corberan-Salvador, M. W. Johnson and G. T. Kohler, Compact heat exchangers modeling: condensation, International Journal of Refrigeration, 33 (2010) 135-147. 

    상세보기

30. Chemical Engineering S. W. Churchill 84 91 1977 S. W. Churchill, Friction equation spans all fluid flow regimes, Chemical Engineering, 84 (1977) 91-92. 

31. International Journal of Multiphase Flow S. Lin 17 95 1991 10.1016/0301-9322(91)90072-B S. Lin, C. C. K. Kwok, R. Y. Li, Z. H. Chen and Z. Y. Chen, Local frictional pressure drop during vaporization of R-12 through capillary tubes, International Journal of Multiphase Flow, 17 (1991) 95-102. 

    상세보기

32. I. E. Idelshik, Handbook of hydraulic resistance, 2nd ed., Hemisphere, New York (1986). 

33. International Journal of Refrigeration M. Padilla 32 1776 2009 10.1016/j.ijrefrig.2009.06.006 M. Padilla, R. Revellin and J. Bonjour, Prediction and simulation of two-phase pressure drop in return bends, International Journal of Refrigeration, 32 (2009) 1776-1783. 

    상세보기

34. L. Friedel, Improved friction pressure drop correlation for horizontal and vertical two-phase pipe flow, European Twophase Group Meeting, Paper E2, Ispra, Italy (1979). 

35. Proceedings 8th International Heat Transfer Conference D. L. Gary 6 2745 1986 D. L. Gary and R. L. Webb, Heat transfer and friction correlation for plate finned-tube heat exchangers having plain fins, Proceedings 8th International Heat Transfer Conference, 6 (1986) 2745-2750. 

36. Int J Heat Mass Transfer K. E. Gungor 29 351 1986 10.1016/0017-9310(86)90205-X K. E. Gungor and R.H.S. Winterton, A general correlation for flow boiling in tubes and annuli, Int J Heat Mass Transfer, 29 (1986) 351-358. 

    상세보기

37. 1st UK National Conference on Heat Transfer M. G. Cooper 2 785 1984 10.1016/B978-0-85295-175-0.50013-8 M. G. Cooper, Saturation nucleate pool boiling: a simple correlation, 1st UK National Conference on Heat Transfer, 2 (1984) 785-793 (International Chemical Engineering Symposium Series, 86 (1984) 785-793). 

    

38. Energia Nucl A. Cicchitti 7 407 1960 A. Cicchitti, C. Lombardi, M. Silvestri, G. Solddaini and R. Zavalluilli, Two-phase cooling experiments-pressure drop, heat transfer and burnout measurements, Energia Nucl, 7 (1960) 407-425. 

39. ASHRAE Transactions Z. H. Chen 96 550 1990 Z. H. Chen, R. Y. Li, S. Lin and Z. Y. Chen, A correlation for meta-stable flow of refrigerant 12 through capillary tubes, ASHRAE Transactions, 96 (1990) 550-554. 

40. International Journal of Multiphase Flow V. Feburie 19 541 1993 10.1016/0301-9322(93)90087-B V. Feburie, M. Giot, S. Granger and J. M. Seynhaeve, A model for choked flow through cracks with inlet subcooling, International Journal of Multiphase Flow, 19 (1993) 541-562. 

    상세보기

저자의 다른 논문 :

정지환 (25) 박상구 (4) Sarker, Debasish (1) 장근선 (27)