최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.21 no.2, 2012년, pp.316 - 323
박영준 (한국기계연구원 시스템엔지니어링연구본부) , 이근호 (한국기계연구원 시스템엔지니어링연구본부) , 송진섭 (한국기계연구원 시스템엔지니어링연구본부) , 남용윤 (한국기계연구원 시스템엔지니어링연구본부) , 박성하 ((주)삼양감속기 기술연구소)
In order to meet the service life of planetary gearbox, a planet bearing, well known as the component with the highest failure rate, is designed. To predict the bearing fatigue life, ISO standard(ISO/TS 16281) is used, and the design parameters of the bearing are optimized using a parametric method....
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
베어링의 피로 수명은 어떤 형상이 일어나는 시점까지를 의미하는가? | 베어링의 피로 수명은 베어링 궤도면 혹은 전동체 표면의 일부가 반복 접촉 응력에 의한 박리현상(flanking)이 발생되는 시점까지를 의미하며, 이 현상은 발생하는 지점에 따라 주원인이 최대전단응력인 표면 아래(subsurface) 박리와, 윤활제, 이물질 및 표면 거칠기와 같은 간접 영향에 의한 표면(surface) 박리로 구분된다(11,12) . 베어링 설계 관점에서 일반적으로 사용되는 베어링의 수명 계산식(2,3)은 표면 아래 박리 이론에 근거하고 있다. | |
유성 기어박스의 장점은 무엇인가? | 최근 들어 부피가 크고 무거운 일반 평행축 기어박스를 대체할 목적으로 동력밀도(power density)가 높고, 소형, 경량화 제작이 가능한 유성 기어박스의 사용이 늘고 있는 추세이다. 그러나 유성 기어박스의 높은 동력밀도로 인하여 핵심 구성요소인 선기어, 유성기어, 링기어 및 유성기어를 지지해주는 유성기어 베어링에 큰 하중이 작용하게 된다. |
Hong, S. O., and Cho, G. J., 1999, "A Study on Preload and Arragement of Combined bearing on Feed Drive System," Proc. of KSMTE Autumn conference, pp. 440-445.
ISO, 2007, Rolling Bearings - Dynamic Load Ratings and Rating Life, ISO 281, International Organization for Standardization, Geneva.
ISO, 2008, Rolling Bearings - Methods for Calculating the Modified Reference Rating Life for Universally Loaded Bearings, ISO/TS 16281, International Organization for Standardization, Geneva.
James, B., and Harris, O., 2002, "Predicting Unequal Planetary Load Sharing due to Manufacturing Errors and System Deflections, with Validation Against Test Data," SAE 2002 World Congress, SAE Technical Paper: 2002-01-0699.
Lee, C. H., 2010, "Optimization of Spindle Units Considering the Decrease of Bearing Stiffness at High Speed Revolution," Journal of the Korean Society of Machine Tool Engineers, Vol. 19, No. 6, pp. 717-723.
Lee, S. P., Lee, I. H., Kim, Y. C., Kim, H, W., Bae, H. U., and Park, J. Y., 2010, "Structural Design and Analysis of Automotive Wheel Bearing using Parametric Method," Proc. of KSME Autumn conference, pp. 574-577.
Lundberg, G., and Palmgren, A., 1952, "Dynamic Capacity of Roller Bearings," ACTA Polytechnica, Mechanical Engineering Series, Vol. 2, No. 4, pp. 1-32.
Pears, J., Curtis, S., Poon, A., Smith, A., Poon, D., and Palmer, D., 2005, "Investigation of Methods to Predict Parallel and Epicyclic Gear Transmission Error," 2005 SAE World Congress, SAE Technical Paper: 2005-01-1818.
Pears, J., Smith, A., Platten, M., Willson, B., Cheng, Y., and Felice, M., 2007, "Predicting Variation in the NVH Characteristics of an Automatic Transmission using a Detailed Parametric Modeling Approach," SAE 2007 Noise and Vibration Conference and Exhibition, SAE Technical Paper: 2007-01-2234.
Yoh, E. G., Kim, Y. R., Han, K. K., Park, M. W., Lee, Y. S., and Yoo, H. I., 1998, "A Study on the Effects of the Bearing Parameters on the Main Spindle Design of Machine Tool," Journal of the Korean Society of Machine Tool Engineers, Vol. 7, No. 2, pp. 119-125.
Yoon, J. C., Choi, D. H., and Hyun, J. S., 1999, "A Design of an Automotive Wheel Bearing Unit for Long Life," Proc. of KSME spring conference(A), pp. 506-511.
Yoon, J. C., Choi, D. H., and Hyun, J. S., 2000, "A Design of an Automotive Wheel Bearing Unit for Long Life", Trans. of the KSME (A), Vol. 24, No. 2, pp. 319-328.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.