최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.29 no.8, 2012년, pp.824 - 833
안동규 (조선대학교 기계공학과) , 박민우 ((주)나라엠엔디 기술연구소) , 김형수 ((주)우성정공 기술연구소)
The shrinkage and the warpage of the moulded part are influenced by the design of the product and injection mould. In a flat part with a partly thick volume, the warpage of the flat part is created from the difference of the shrinkage between thin and thick regions. The warpage of the flat part with...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Spina, R., "Injection Moulding of Automotive Components: Comparison between Hot Runner System for a Case Study," Journal of Materials Processing Technology, Vol. 155-156, No. 12, pp. 1497-1504, 2004.
Park, K., Sohn, D. H., and Seo, Y. S., "Investigation of Weldline Strength with Various Heating Conditions," J. of the KSPE, Vol. 27, No. 1, pp. 105-112, 2010.
Dalgarno, K. W. and Stewart, T. D., "Manufacture of Production Injection Mould Tooling Incorporating Conformal Cooling Channels via Indirect Selective Laser Sintering," Proceedings of Institution of Mechanical Engineers Part B: Journal Engineering Manufacture, Vol. 215, No. 10, pp. 1323-1332, 2001.
Ahn, D. G., Park, M. W., Park, S. W., and Kim, H. S., "Design of the Conformal Cooling Channels of the Mould for the Plastic Part of the Refrigerator via Three-dimensional Injection Moulding Analysis," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 10, pp. 1487-1492, 2010.
Hong, M., Lee, J., and Shin, S., "A Study on the Improvement of Double Injection-molding Keypad Process," Journal of Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 5, pp. 659-665, 2011.
Akay, M. and Ozden, S., "Prediction of Process-Induced Warpage in Injection Molded Thermoplastics," Polymer Engineering and Science, Vol. 36, No. 13, pp. 1839-1846, 1996.
Yang, S. S. and Kwon, T. H., "Deformation Analysis of Injection Molded Articles due to In-mold Residual Stress and Cooling after Ejection," Proceedings of Spring Annual Meeting of Korean Society of Mechanical Engineers, pp. 251-256, 2001.
Kabanemi, K. K., Vailancourt, H., Wang, H., and Salloum, G., "Residual Stresses, Shrinkage, and Warpage of Complex Injection Molded Products: Numerical Simulation and Experimental Validation," Polymer Engineering and Science, Vol. 38, No. 1, pp. 21-37, 1998.
Choi, D. S. and Im, Y. T., "Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding," Composite Structures, Vol. 47, No. 1-4, pp. 655-665, 1999.
Chen, X., Lam, Y. C., and Li, D. Q., "Analysis of Thermal Residual Stress in Plastic Injection Molding," Journal of Materials Processing Technology, Vol. 101, No. 1-3, pp. 275-280, 2000.
Ferreira, J. C. and Mateus, A., "Studies of Rapid Soft Tooling with Conformal Cooling Channels for Plastic Injection Molding," Journal of Materials Processing Technology, Vol. 142, No. 2, pp. 508-516, 2003.
Hilton, P. D. and Jacobs, P. E., "Rapid Tooling: Technologies and Industrial Applications," Marcel Dekker Inc., 2000.
Sachs, E., Wylonis, E., Allen, S., Cima, M., and Guo, H., "Production of Injection Molding Tooling with Conformal Cooling Channels Using the Three Dimensional Printing Process," Polymer Engineering and Science, Vol. 40, No. 5, pp. 1232-1247, 1996.
Kuo, C. F. J. and Su, T. L., "Optimization of Injection Molding Processing Parameters for LCD Light-Guide Plates," Journal of Materials Engineering and Performance, Vol. 16, No. 5, pp. 539-548, 2007.
Wang, G., Zhao, G., Li, H., and Guan, Y., "Research on a New Variotherm Injection Molding Technology and Its Application on the Molding of a Large LCD Panel," Polymer-Plastic Technology Engineering, Vol. 48, No. 7, pp. 671-681, 2009.
Jacques, M. S., "An Analysis of Thermal Warpage in Injection Molded Flat Parts Due to Unbalanced Cooling," Polymer Engineering and Science, Vol. 22, No. 4, pp. 241-247, 1982.
Park, S. J. and Kwon, T. W., "Optimal Cooling System Design for the Injection Molding Process," Polymer Engineering and Science, Vol. 38, No. 9, pp. 1450-1462, 1998.
Huang, M. C. and Tai, C. C., "The Effective Factors in the Warpage Problem of an Injection-molded Part with a Thin Shell Feature," Journal of Materials Processing Technology, Vol. 110, No. 1, pp. 1-9, 2001.
Kim, C. H. and Youn, J. R., "Determination of Residual Stresses in Injection-moulded Flat Plate: Simulation and Experiments," Polymer Testing, Vol. 26, No. 7, pp. 862-868, 2007.
Yoon, G. S., Lee, J. W., Seo, T. I., Kim, Y. J., and Lee, J. B., "A Study on the Analysis of Multi-cavity Co-injection Molding Characteristics by CAE Method," Proceedings of Spring Annual Meeting of Korean Society of Precision Engineering, pp. 451-452, 2011.
Ahn, D. G., Park, M. W., and Kim, H. S., "Selection of Double Shot Moulding Conditions via Injection Moulding Analysis," Proceedings of Spring Annual Meeting of Korean Society of Precision Engineering, pp. 1195-1196, 2010.
Ahn, D. G., Park, M. W., and Kim, H. S., "Design of Cooling System for Multi-Sliced Mould with Volumetric Heat Sink via Three-Dimensional Injection Moulding Analysis," Proceedings of Autumn Annual Meeting of Korean Society of Precision Engineering, pp. 883-884, 2010.
Born, M. and Wolf, E., "Principles of Optics, 7th ed.," Cambridge University Press, pp. 517-521, 1990.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.