최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국농공학회논문집 = Journal of the Korean Society of Agricultural Engineers, v.54 no.4, 2012년, pp.29 - 38
남원호 (서울대학교 생태조경.지역시스템공학부) , 최진용 (서울대학교 조경.지역시스템공학부, 농업생명과학연구원) , 최순군 (서울대학교 생태조경.지역시스템공학부) , 홍은미 (서울대학교 생태조경.지역시스템공학부) , 전상호 (농촌진흥청 국립농업과학원 토양비료관리과) , 허승오 (농촌진흥청 연구정책과)
Drip irrigation is a affordable irrigation under structured cultivation. Drip irrigation system with high uniformity can be achieved through effective design, maintenance and management of irrigation systems. Nevertheless the design guidelines have not been established for the drip irrigation system...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국내의 시설농업 현황은? | 우리나라의 시설농업은 연중 고품질의 농산물 생산 및 생산자의 고수익 창출을 목적으로 재배 면적이 증가하고 있으며 (Lee et al., 1998; Lee et al., 2008), 농업용수의 공급 측면에서 점적관개의 활용이 보편화 되고 있다. 점적관개는 점적호스 및 점적테이프를 이용하여 작물의 근군역에 필요한 수량을 공급함으로써 관개용수를 고효율로 사용할 수 있는 미소관개 (微小灌漑, Micro-irrigation) 기법이다. | |
점적관개란 무엇인가? | , 2008), 농업용수의 공급 측면에서 점적관개의 활용이 보편화 되고 있다. 점적관개는 점적호스 및 점적테이프를 이용하여 작물의 근군역에 필요한 수량을 공급함으로써 관개용수를 고효율로 사용할 수 있는 미소관개 (微小灌漑, Micro-irrigation) 기법이다. 점적관개는 미세 또는 점적 라인을 이용하여 작물 근권부 주변에만 물을 공급할 수 있기 때문에 토양 증발 및 지하 배수에 의한 손실을 줄이고 작물 생육에 필요한 적정 양을 투입할 수 있는 장점이 있으며 (Kim et al. | |
시설 재배를 위한 관개에 필요한 물관리가 이루어지기 위해 필요한 것은? | , 1998). 시설재배 작물의 합리적인 물관리가 이루어지기 위해서는 공학적인 이해와 평가를 통해 관개 시스템 설계에 의한 충분한 용수를 확보하고 지역 특성과 재배 작물에 적합한 관개시설이 설치되어야 한다. 또한 작물에 필요한 수량을 각 지점에 균일하게 관개할 수 있도록 관리 ․ 운영되는 것이 중요하다. 따라서 시설재배지의 점적관개 시스템 설계를 위해서는 점적기의 특성과 관개시설의 규모 및 관개방식에 따라 관망을 설계하고 관개균일도 및 관개효율의 검토가 요구된다. |
American Society of Agricultural Engineers, 1996. Field evaluation of microirrigation systems. ASAE Standards, 43rd Edition, St. Joseph, Mich. ASAE EP458.: 756-761.
American Society of Agricultural Engineers, 2010. Design and Installation of Microirrigation Systems. ASAE Standards, St. Joseph, Mich. ASAE EP405.1. APR1988.
Barragan, J., V. Bralts and I. P. Wu, 2006. Assessment of emission uniformity for micro-irrigation design. Biosystems Engineering 93(1): 89-97.
Bralts, V. F., I. P. Wu and H. M. Gitlin, 1981. Manufacturing variation and drip irrigation uniformity. Transactions of the American Society of Agricultural Engineers 24(1): 113-119.
Bralts, V. F. and C. D. Kesner, 1983. Drip irrigation field uniformity estimation. Transactions of the American Society of Agricultural Engineers 26(5): 1369-1374.
Burt, C. M., A. J. Clemmens, T. S. Strelkoff, K. H. Soilomon, R. D. Bliesner, L. A. Hardy, T. A. Howell and D. E. Eisenhauer, 1997. Irrigation performance measures: efficiency and uniformity. Journal of Irrigation and Drainage Engineering 123(6): 423-442.
Camp, C. R., E. J. Sadler and W. J. Busscher, 1997. A comparison of uniformity measures for drip irrigation systems. Transactions of the American Society of Agricultural Engineers 40(4): 1013-1020.
Christiansen, J. E., 1942. Hydraulics of sprinkling systems for irrigation. Transactions of the American Society of Civil Engineers 107: 221-239.
Chung, S. O., 1993. An anlysis of the effects of turbotape drip irrigation system on chinese cabbage. Journal of the Korean Society of Agricultural Engineers 35(4): 31-37 (in Korean).
Clemmens, A. J. and K. H. Solomon, 1997. Estimation of global irrigation distribution uniformity. Journal of Irrigation and Drainage Engineering 123(6): 454-461.
Fares, A. and A. K. Alva, 2000. Evaluation of capacitance probes for optimal irrigation of citrus through soil moisture monitoring in an entisol profile. Irrigation Science 19: 57-64.
Jensen, M. E., 1983. Design and operation of farm irrigation systems. An ASAE Monograph No. 3 St. Joseph, Mich.: ASAE.
Karmeli, D., G. Peri and M. Todes, 1985. Irrigation systems: design and operation. Ch. 3. Design of laterals, manifold and sub-units, Oxford University Press, UK.
Keller, J. and D. Karmeli, 1974. Trickle irrigation design parameters. Transactions of the American Society of Agricultural Engineers 17(4): 678-684.
Kim, H. J., D. W. Son, S. O. Hur, M. Y. Roh, K. Y. Jung, J. M. Park, J. Y. Rhee and D. H. Lee, 2009. Comparison of wetting and drying characteristics in differently textured soils under drip irrigation. Journal of Bio-Environment Control 18(4): 309-315 (in Korean).
Lee, N. H., H. C. Hwang, S. W. Nam, S. G. Hong and W. J. Jeon, 1998. A study on the utilization of irrigation systems for greenhouse farming. Journal of the Korean Society of Agricultural Engineers 40(6): 37-45 (in Korean).
Lee, N. H., 1999. Performance and hydraulic characteristics of drip emitters. Journal of the Korean Society of Agricultural Engineers 41(3): 33-40 (in Korean).
Nam, S. W. and Y. S. Kim, 2007. Discharge variation of perforated hoses and drip irrigation systems for protected cultivation. Journal of Bio-Environment Control 16(4): 297-302 (in Korean).
Ortega, J. F., J. M. Tarjuelo and J. A. de Juan, 2002. Evaluation of irrigation performance in localized irrigation system of semiarid regions (Castilla-La Mancha, Spain). Agricultural Engineering International, CIGR Journal of Scientific Research and Development 4: 1-17.
Pedra, C. M. G., L. S. Pereira and J. M Goncalves, 2009. MIRRIG: A decision support system for design and evaluation of microirrigation systems. Agricultural Water Management 96: 691-701.
Thompson, R. B., M. Gallardo, T. Aguera, L. C. Valdez and M. D. Fernandez, 2006. Evaluation of the watermark sensor for use with drip irrigated vegetable crops. Irrigation Science 24: 185-202.
Wu, I. P., 1997. An assessment of hydraulic design of micro-irrigation systems. Agricultural Water Management 32: 275-284.
Yoo, D. H., Y. S. Wun and K. S. Yoon, 1996. Pipe network analysis according to friction factor of commercial pipe. Journal of the Korean Water Resources Association 29(5): 161-172 (in Korean).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.