최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항공우주학회지 = Journal of the Korean Society for Aeronautical & Space Sciences, v.40 no.8, 2012년, pp.670 - 677
정재연 (충북대학교 대학원 토목시스템공학과) , 우경식 (충북대학교 토목공학부) , 이동주 (한국과학기술원 신소재공학과) , 홍순형 (한국과학기술원 신소재공학과) , 김연철 (국방과학연구소)
In this paper, mechanical property of biomorphic C/SiC composite was calculated by unit cell analysis. The microstructural arrangements of carbonized pine and radiata pine which were impregnated with silicon, were idealized as square and hexagonal arrays. Unit cell was then defined and equivalent el...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
바이오모프 복합재료의 제조 방법은 무엇인가? | 또한 최근에는 천연 목재를 이용하여 제조하는 바이오모프(Biomorphic) C/SiC 복합재료에 대한 연구가 활발히 진행되고 있다. 바이오모프 복합재료는 천연의 목재를 탄화시켜 저밀도 탄소 프리폼을 만들고 고온 진공로를 이용해 액상 실리콘을 함침하는 방법으로 만들어진다. 이 과정에서 C와 Si의 반응을 통해 생성된 SiC는 함침전의 Si와 C에 비해 매우 강한 물성치를 가지기 때문에 SiC의 비율이 증가하고 기공의 비율이 감소하여 복합재료의 강도가 증가하게 된다. | |
바이오모프 탄소 프리폼 제작에 사용되는 목재로 무엇이 있는가? | 바이오모프 탄소 프리폼 제작에 사용되는 목재에는 참나무, 단풍나무, 오동나무 등 활엽수와 소나무, 뉴송 등의 침엽수, 그리고 가공목재 MDF(Medium-Density Fibreboard)가 있다. 활엽수는 기공의 크기가 미세하지만 일부 큰 기공이 존재해 기공의 크기가 일정하지 않고 침엽수의 경우 기공의 크기는 활엽수에 비해 상대적으로 크지만 그 모양이나 크기가 균일하다는 특징이 있다. | |
바이오모프 복합재료는 제조과정에서 어떠한 현상을 통해 강도가 증가하게 되는가? | 바이오모프 복합재료는 천연의 목재를 탄화시켜 저밀도 탄소 프리폼을 만들고 고온 진공로를 이용해 액상 실리콘을 함침하는 방법으로 만들어진다. 이 과정에서 C와 Si의 반응을 통해 생성된 SiC는 함침전의 Si와 C에 비해 매우 강한 물성치를 가지기 때문에 SiC의 비율이 증가하고 기공의 비율이 감소하여 복합재료의 강도가 증가하게 된다. |
Hermann, H., "Operational limits for reusable space transportation systems due to physical boundaries of C/SiC materials", Aerospace Science and Technology, Vol. 7, 2003, pp. 551-559.
Park, H. S., Jang, J. J., Lee, K. H., Lim, K. H., Park, S. B., Kim, Y. C., and Hong, S. H., "Effects of microstructure on flexural strength of biomorphic C/SiC composites", International Journal of Fracture, Vol. 151, 2008, pp. 233-245.
Lee, Dong J., Jang, Jong J., Park, H. S., Kim, Y. C., Lim, K. H., Park, S. B. and Hong, S. H., "Fabrication of biomorphic SiC composites using wood preforms with different structures", Ceramics International, Vol. 38, 2012, pp. 3089-3095.
Vereda Alonso, E., Garcia de Torres, A., Siles Cordero, M. T. and Cano Pavon, J. M., "Multivariate optimization of the synthesis and of the microwave dissolution of biomorphic silicon carbide ceramics", Microchemical Journal, Vol. 97, 2011, pp. 101-108.
Cano Pavon, J. M., Vereda Alonso, E., Siles Cordero, M. T., Garcia de Torres, A. and Lopez-Cepero, J. M., "Use of spectroscopic techniques for the chemical analysis of biomorphic ilicon carbide ceramics", Analytica Chimica Acta, Vol. 528, 2005, pp. 129-134.
Gordic, M. V., Babic, B. M., Stasic, J. M., Trtica, M. S., Volkow Husovic, T., Posarac, M. B. and Matovic, B. Z., "Mechanical properties of biomorphic silicon carbide ceramics", Science of Sintering, Vol. 43, 2011, pp. 215-223.
Presas, M., Pastor, J. Y., LLorca, J., Arellano-Lopez, A. R., Martinez-Fernandez, J. and Sepulveda, R. E., "Mechanical behavior of biomorphic Si/SiC porous composites", Scripta Materialia, Vol. 53, pp. 1175-1180.
Greil ,P., Lifka, T. and Kaindl, A., "Biomorphic cellular silicon carbide ceramics from wood: I. Processing and microstructure", Journal of the European Ceramic Society, vol. 18, 1998, pp. 1961.1973.
Greil ,P., Lifka, T. and Kaindl, A., "Biomorphic cellular silicon carbide ceramics from wood: II. Mechanical properties", Journal of the European Ceramic Society, vol. 18, 1998, pp. 1975-1983.
Hoppe, R. H. W., Petrova, S. I., "Optimal shape design in biomimetics based on homogenization and adaptivity", Mathematics and Computers in Simulation, Vol. 65, 2004, pp. 257-272.
Hoppe, R. H. W., Petrova, S. I., "Optimal structural design of biomorphic composite materials", Lecture Notes in Computer Science, 2003, pp. 479-487.
Hoppe, R. H. W., Petrova, S. I., "Elasto-platicity model in strucural optimization of composite materials with periodic microstructures", Mathematics and Computers in Simulation, Vol. 74, 2007, pp. 468-480.
Bordas, S., Hoppe, R. H. W. and Petrova, S. I., "Mechanical failute in microstructural heterogeneous materials", Lecture Notes in Computer Science, 2007, pp. 533-541.
Hoppe, R. H. W., Petrova, S. I. and Vassilevski, Y. V., "Adaptive grid refinement for computation of the homogenized elasticity tensor", Lecture Notes in Computer Science, 2004, pp. 371-378.
김성준, 한수연, 신의섭, "미시역학적 유한 요소 모델을 이용한 다공성 복합재료의 기공 탄성 인자 산출", 한국복합재료학회지 25권 1호, 2012, pp. 1-8.
Klann, S. C., "Unit cell analysis of composite microstructures", Master Thesis, Michigan State University, 2008.
Whitcomb, J. D., "Three-dimensional stress analysis of plain weave composites", NASA TM 101672, 1989.
Gibson, R. F., "Principles of composite material mechanics", McGraw-Hill, 1994.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.