최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합신소재구조학회 논문집 = Journal of the Korean Society for Advanced Composite Structures, v.3 no.3, 2012년, pp.9 - 21
박지웅 (인천대학교 건설환경공학과) , 이두재 (대림산업) , 장성수 ((주) 콘프라) , 허종완 (인천대학교 건설환경공학과)
Concrete filled steel tube (CFT) columns have been widely used in moment resisting frame structures both in seismic zones. This paper discusses the design of such members based on the advanced methods introduced in the 2005 AISC Specification and the 2005 Seismic Provisions. This study focuses parti...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
AISC Specification (2005). "Specification for Structural Steel Buildings." (ANSI/AISC 360-05), Chicago
ASCE (2002). "Minimum Design Loads for Buildings and Other Structures." ASCE 7-05, USA.
Azizinamini, A. and Schneider, S. P. (2001). "Moment Connections to Circular Concrete-Filled Steel Tube Columns." J. Struc. Eng., ASCE, 130(2), pp. 213-222.
Deierlein, G. G. (1998). "Summary of SAC Case Study Building Analysis." J. Perform. Construc. Facil., ASCE, 12(4), pp 202-212.
El-Tawil, S., Kanno, R., and Deierlein, G. G. (1996). "Inelastic Models for Composite Moment Connections in RCS Frames, Composite Construction in Steel and Concrete III." ASCE Special Publication, Edited by Buckner, C. D and Shahrooz, B., SEI, American Society of Civil Engineers, pp. 197-210.
FEMA (1995). "NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Part 1 and 2, 1994 ed., Report FEMA 222A and 223A." Federal Emergency Management Agency, Washington, D.C., USA.
Galambos, T. V. (ed.) (1998). Guide to Stability Design Criteria for Steel Structures. Structural Stability Research Council, 5th edition, John Wiley and Sons, NewYork, NY.
Green, T. P., Leon, R. T. and Rassati, G. A. (2004). "Bidirectional Tests on Partially Restrained, Composite Beam-Column Connections." J. Struc. Eng., ASCE, 130(2), pp 320-327.
Hajjar, J. F. et. al. (1998). "Analysis of Mid-Rise Steel Frame Damaged in Northridge Earthquake." J. Perform. Construc. Facil., ASCE, 12(4), pp 221-231.
Hajjar, J. F. (2002). "Composite steel and concrete structural systems for seismic engineering." J. Construc. Steel Res. 58, pp 703-723
Kim, D. K. (2005). A Database for Composite Columns, Master Thesis in School of Civil and Environmental Engineering. Georgia Institute of Technology, Gerogia, USA.
Mazzoni, S., Mckenna, F., Fenves, G. L. (2005). Opensees Command Language Manual. Department of Civil Environmental Engineering, University of California, Berkley, CA, USA.
Rassati, G. A., Leon, R. T. and Noe, S. (2004). "Component Modeling of Partially Restrained Composite Joints under Cyclic and Dynamic Loading." J. Struc. Eng., ASCE. 130(2), pp 343-351.
Roeder, C. W. (2000). "Seismic Behavior of Steel Braced Frame Connections to Composite Columns." Connections in Steel Structure 4 (R. Leon and S. Easterling, eds.), AISC, pp. 51-62.
Seismic Provision (2005). "Seismic Provisions for Structural Steel Buildings." ANSI/AISC 341-05, Chicago, USA.
Tsai, K. C. et al. (2004). "Pseudo Dynamic Tests of a Full-Scale CFT/BRB Composite Frame." Proc. of the 2004 Structure Congress, ASCE.
Varma, A. H. et. al. (2004). "Seismic Behavior and Design of High-Strength Square Concrete-Filled Steel Tube Beam Columns." J. Struc. Eng., ASCE, 130(2), pp. 169-179.
Viest, I. M. et al. (1997). Composite Construction Design for Building. Co-published by ASCE, McGraw-Hill, Chapter 5.3., USA.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.