최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.25 no.12, 2013년, pp.654 - 659
유기정 (한양대학교 기계공학과) , 이관수 (한양대학교 기계공학과)
This paper presents a numerical optimization of louvered fins to enhance the JF factor in terms of the design parameters, including the fin pitch, the number of louvers, the louver angle, the fin thickness, and the re-direction louver length. We carried out a parametric study to select the three mos...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
루버휜은 무엇에 널리 사용되고 있는가? | 루버휜은 plate-fin 열교환기 및 fin-tube 열교환기에 널리 사용되고 있으며, 기하학적 형상에 의해 열전달 면적을 늘릴 뿐만 아니라 각 열마다 열경계층을 새로 생성하여 열전달량을 증가시킨다. 그러나 루버휜은 열교환기 내 압력강하를 증가시키므로 루버휜의 성능 향상은 열전달 증가와 압력강하 감소라는 상반된 물리 현상을 동시에 만족함으로써 이룰 수 있다. | |
루버휜의 성능 향상은 열전달 증가와 압력강하 감소라는 상반된 물리 현상을 동시에 만족함으로써 이룰 수 있는 이유는 무엇인가? | 루버휜은 plate-fin 열교환기 및 fin-tube 열교환기에 널리 사용되고 있으며, 기하학적 형상에 의해 열전달 면적을 늘릴 뿐만 아니라 각 열마다 열경계층을 새로 생성하여 열전달량을 증가시킨다. 그러나 루버휜은 열교환기 내 압력강하를 증가시키므로 루버휜의 성능 향상은 열전달 증가와 압력강하 감소라는 상반된 물리 현상을 동시에 만족함으로써 이룰 수 있다. 따라서 제한된 조건하에서 상반된 물리 현상을 극복하고 루버휜의 성능을 증가시키기 위해 루버휜의 최적화에 대한 연구가 필요하다. | |
루버휜의 형상 최적화를 진행하기 위한 루버휜 설계인자의 영향도를 분석에 사용된 설계 인자는 무엇인가? | 루버휜의 형상 최적화를 진행하기 위해 루버휜 설계인자의 영향도를 조사하였다. 본 연구에서 인자 영향도를 분석하기 위해 택한 설계 인자는 fin pitch, number of louver, louver angle, fin thickness 및 re-direction louver length이다. Table 2에서 2차원 모델과 3차원 모델의 JF수 오차가 작기 때문에 루버휜의 설계인자 중 3차원 형상에서 표현되는 tube pitch, louver height, louver length 및 tube depth는 설계인자에서 제하였다. |
Qi, Z. G., Chen, J. P., and Chen, Z. J., 2007, Parametric study on the performance of a heat exchanger with corrugated louvered fins, Applied Thermal Engineering, Vol. 27, pp. 539-544.
Hsieh, C. T. and Jang, J. Y., 2012, Parametric study and optimization of louver finned-tube heat exchangers by Taguchi method, Applied Thermal Engineering, Vol. 42, pp. 101-110.
Ameel, B., Degroote, j., T'Joen, C., Jaeger, P. D., Huisseune, H., Schampheleire, S. D., Vierendeels, J., and Paepe, M. D., 2013, Optimization of X-shaped louvered fin and tube heat exchangers while maintaining the physical meaning of the performance evaluation criterion, Applied Thermal Engineering, Vol. 58, pp. 136-145.
Yun, J. Y. and Lee, K. S., 2000, Influence of design parameters on the heat transfer and flow friction characteristics of the heat transfer with slit fins, International Journal of Heat and Mass Transfer, Vol. 43, pp. 2529-2539.
Kays, W. M. and London, A. L., 1950, Heat transfer and flow friction characteristics of some compact heat exchanger surfaces-part I:test system and procedure, Transactions of the ASME, Vol. 72, pp. 1075-1085.
Kim, M. H. and Bullard, C. W., 2002, Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchanger, International Journal of Refrigeration, Vol. 25, pp. 390-400.
David, C. W., 2004, Turbulence Modeling, DCW Industries.
Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J., 1995, A new k-epsilon eddy-viscosity model for high Reynolds number turbulent flows:model development and validation, Computers and Fluids, Vol. 24, pp. 227-238.
Kim, M. S. and Lee, K. S., 2010, The thermoflow characteristics of an oscillatory flow in offset-strip fins, Numerical Heat Transfer Part A, Vol. 58, pp. 835-851.
Davenport, C. J., 1983, Correlation for heat transfer and friction characteristics of louvered fin, AIChE Symposium Series, Vol. 79, pp. 19-27.
Chang, Y. J. and Wang, C. C., 1997, A generalized heat transfer correlation for louver fin geometry, International Journal of Heat and Mass Transfer, Vol. 40, pp. 533-544.
Chang, Y. J., Hsu, K. C., Lin, Y. T., and Wang, C. C., 2000, A generalized friction correlation for louver fin geometry, International Journal of Heat and Mass Transfer, Vol. 43, pp. 2237-2243.
Simpson, T. W., Mauery, T. M., Korte, J. J., and Mistree, F., 2001, Kriging models for global approximation in simulation-based multidisciplinary design optimization, AIAA Journal, Vol. 39, pp. 2233-2241.
Krishnakumar, K., 1989, Micro genetic algorithms for stationary and non-stationary function optimization, Intelligent Control and Adaptive Systems, Vol. 1196, pp. 289-296.
PIAnO(Process Integration, Automation and Optimization), 2011, User's manual, Version 3.3, Framax Inc.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.