최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.14 no.12, 2013년, pp.6072 - 6081
In this study, experiments were performed on air heater samples with three different shapes (chevron, wave and dimple type) to reduce the plumes from cooling towers. The tests were conducted for a range of frontal air velocities of 1~3 m/s and water flow rate 0.19~0.33 kg/s. The results showed that ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
냉각탑은 무엇으로 구성되는가? | 산업설비 및 공조설비에서 발생되는 열부하는 주로 냉각탑을 사용하여 외부로 방출된다. 냉각탑은 공기의 흐름을 형성하는 송풍기와 물의 흐름을 가이드하는 충진재로 구성된다. 송풍기로는 프로펠러 팬 또는 원심식 송풍기가 사용된다. | |
백연이란? | 최근 들어 환경에 대한 관심이 높아지며 냉각탑의 백연 문제가 사회적으로 이슈가 되고 있다. 백연이란 냉각탑 출구에서 방출되는 습공기가 주위의 차가운 대기와 혼합되는 과정에서 수증기의 재응축에 의해 생성되는 과포화 상태의 안개와 같은 액적을 말한다. 백연을 방지하기 위해서는 냉각탑 출구 공기의 상대습도를 낮춰 차가운 외기와 접하더라도 포화선을 넘지 않도록 하면 된다. | |
금속 재질의 핀-튜브 형상의 문제를 보완하기 위해 어떠한 열교환기를 사용하는가? | 하지만 핀-튜브 형상의 경우 가격이 고가이고 부식과 관내 스케일 부착 등의 문제가 있다. 이러한 문제는 판형의 플라스틱 열교환기를 사용하면 완화될 수 있다[5]. |
S. M. Zivi and B. B. Brand, An Analysis of the Cross-flow Cooling Tower, Refrigeration Engineering, Vol. 64, pp. 31-34 and 90-92, 1956.
D. R. Baker and H. A. Shryock, A Comprehensive Approach to the Analysis of Cooling Tower Performance, J. Heat Transfer, Vol. 83, pp. 339-349, 1961.
J. C. Campbell, The Prevention of Fog from Cooling Towers, Annual Meeting of the Cooling Tower Institute, Houston, 1976.
C. K. Choi., Y. K. Choi., and H. Y. So., A Numerical Study on the Performance Analysis of the Plume Abatement NWD Cooling Tower, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 11. pp. 1049-1058. 2001.
Clearflow Application, Users Manual, Marley Cooling Technologies Inc, 2005.
A. Cooper and J. D. Usher, Plate Heat Exchangers, in Heat Exchanger Design Handbook, Hemisphere Publisher, New York, Chap. 3.7, 1983.
M. Ciafalo, J. Stasiek and M. W. Collins, Investigation of Flow and Heat Transfer in Corrugated Passages, Int. J. Heat Mass Transfer, Vol. 39, pp. 165-192. 1996.
B. Sunden, Flow and Heat Transfer Mechanisms in Plate-Frame Heat Exchangers, in Heat Transfer Enhancement of Heat Exchangers, Kluwer Academic Pub., pp. 185-206, 1999.
K. H. Lee, W. Y. Choi, J. H. Lee and H. Y. So, Comparison of performance of cooling water with various shape of packings, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 10, pp. 358-367, 1998.
S. Y. Yoo, M. H. Chung, K. H. Kim and J. M. Lee, An Experimental Study on the Performance of Plastic Plate Heat Exchanger, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 17, pp. 117-124, 2005.
S. Y. Yoo, M. H. Chung and Y. M. Lee, A Study on the Factors Affecting the Performance of Plastic Plate Heat Exchanger, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 17, pp. 839-848, 2005.
M. H. Chung, S. Y. Yoo, K. H. Han and H. I. Yoon, A Numerical Study on the Flow and Heat Transfer Characteristics of Plastic Plate Heat Exchanger, Proceedings of the Summer Annual Conference, SAREK, pp. 1366-1371, 2008.
M. Kim, J.-H. Lee, S. R. Park, H. S. Ra, J. H. Jeong and H. Lim, Experimental Investigation of an Cross-Flow Air-Cooled Heat Exchanger with Single-Wave and Double-Wave Plates, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 21, pp. 347-354,
H. J. Ahn, S. H. Lee, N. Hur, H. J. Park and H. S. Ryu, 2010, A Numerical Simulation of Flow and Heat Transfer in a Dimpled-Type Plate Heat Exchanger, Korean J. Air-Conditioning and Refrigeration Engineering, Vol. 22, pp. 149-155, 2009.
R. L. Webb and N. H. Kim, 2005, Principles of Enhanced Heat Transfer, Taylor and Francis Pub.
ASHRAE Standard 41.1, Standard Method for Temperature Measurement, ASHRAE, 1986.
ASHRAE Standard 41.2, Standard Method for Laboratory Air-Flow Measurement, ASHRAE, 1987.
ASHRAE Standard 41.5, Standard Measurement Guide, Engineering Analysis of Experimental Data, 1975.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.