최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.33 no.1, 2013년, pp.181 - 194
정승원 (한국지질자원연구원 지구환경연구본부) , (교토대학교 방재연구소) , 송영석 (한국지질자원연구원 지구환경연구본부)
Landslides are known as gravitational mass movements that can carry the flow materials ranging in size from clay to boulders. The various types of landslides are differentiated by rate and depositional features. Indeed, flow characteristics are observed from very slow-moving landslides (e.g., mud sl...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
산사태는 무엇인가? | 산사태는 토사, 거석, 유목 등 산사태 물질의 중력사면 이동현상이다. 산사태는 수리학적, 지형학적, 지반공학적 요인에 따라 다양한 흐름 및 퇴적특성을 보인다. | |
산사태는 어떠한 요인에 따라 흐름 및 퇴적특성을 보이는가? | 산사태는 토사, 거석, 유목 등 산사태 물질의 중력사면 이동현상이다. 산사태는 수리학적, 지형학적, 지반공학적 요인에 따라 다양한 흐름 및 퇴적특성을 보인다. 흐름특성은 아주 느리게 움직이는 산사태(활동, 이류 등)에서 아주 빠르게 움직이는 산사태(토석사태, 토석류 등)까지 다양하다. | |
비배수 전단강도 측정용 링 전단시험장치는 어떠한 기능을 갖춘 시험장치인가? | 비배수 전단강도 측정용 링 전단시험장치는 기존에 개발된 링 전단시험기의 수정보완형으로 '포화-압밀-배수-전단' 순으로 시험조건을 자유롭게 조절할 수 있다. 링 전단상자내 흙 시료의 전단강도의 정확한 측정을 위해 미끄럼 방지, 밀폐성 및 회전성 향상 기능을 갖춘 시험장치이다. 링 전단시험장치는 모래와 자갈 시료에 대한 예비실험을 수행하였으며 기존 시험결과와 비교하여 신뢰할 만한 결과를 확인하였다. |
Korea Institute of Geoscience and Mineral Resources (2011) Development of practical technologies for countermeasures for hazards in steep slope and abandoned mine areas, Ministry of Knowledge Economy, GP2009-020-2011(3), 306p.
Bishop, A.W., Green, G.E., Garga, V.K., Andersen, A. and Brown, J.D. (1971) A new ring-shear apparatus and its application to the measurement of residual strength, Geotechnique, Vol. 21, pp. 273-328.
Comegna, L., Picarelli, L., Urciuoli, G. (2007) The mechanics of mudslides as a cyclic undrained-drained process, Landslides, Vol. 4, pp. 217-232.
Coussot, P., Tocquer, L., Lanos, C., and Ovalez, G. (2009) Macroscopic vs. local rheology of yield stress fluids, Journal of Non-Newtonian Fluid Mechanics, Vol. 158, pp. 85-90.
Hungr, O., and Morgenstern, N.R. (1984) High-velocity ring-shear tests on sand, Geotechnique, Vol. 34, No. 3, pp. 415-421.
Hvorslev, M.J. (1939) Torsion shear tests and their place in the determination of the shearing resistance of soils. Proc. Am. Soc. Test Mater, Vol. 39, pp. 999-1022.
Jongmans, D., Bievre, G., Schwartz, S., Renalier, F., Beaurez, N., Orengo, Y. (2009) Geophysical investigation of a large landslide in glaciolacustrine clays in the Trieves area (French Alps), Engineering Geology, Vol. 109, pp. 45-56.
Jeong, S.W., Locat, J., Leroueil, S. and Malet, J.-P. (2010). Rheological properties of fine-grained sediments: the roles of texture and mineralogy, Canadian Geotechnical Journal, Vol. 47, pp. 1085-1100.
Jeong, S.W. (2010) Grain size dependent rheology on the mobility of debris flows, Geosciences Journal, Vol. 14, pp. 359-369.
Leroueil, S. (2001) Natural slopes and cuts: movement and failure mechanisms, Geotechnique, Vol. 51, No. 3, pp. 197-243.
Locat, J. and Demers, D. (1988) Viscosity, yield stress, remoulded strength, and liquidity index relationships for sensitive clays, Canadian Geotechnical Journal, Vol. 25, pp. 799-806.
Locat, J. (1997) Normalized rheological behaviour of fine muds and their flow properties in a pseudoplastic regime, Proc. 1stInt. Conf. on Debris-Flow Hazards Mitigation, San Francisco. ASCE, New York, pp. 260-269.
Malet, J.-P., Laigle, D., Remaitre, A., Maquaire, O. (2005) Triggering conditions and mobility of debris flows associated to complex earthflows, Geomorphology, Vol. 66, pp. 215-235.
Ovalez, G., Rodts, S., Chateau, X., Coussot, P. (2009) Phenomenology and physical origin of shear localization and shear banding in complex fluids, Rheologica Acta, Vol. 48, pp. 831-844.
Picarelli, L., Urciuoli, G., Ramondini, M., Comegna, L. (2005) Main features of mudslides in tectonised highly fissured clay shales, Landslides, Vol. 2, pp. 15-30.
Sadrekarimi A., and Olson, S.M. (2010) Particle damage observed in ring shear tests on sands, Canadian Geotechnical Journal, Vol. 47, pp. 497-515.
Sassa, K. (1992) Access to the dynamics of landslides during earthquakes by a new cyclic loading high-speed ring-shear apparatus, Proc. 6th International Symposium on Landslides, Christchurch, Vol. 3, pp. 1919-1937.
Sassa, K. (1997) A new intelligent-type dynamic-loading ring-shear apparatus. Landslide News, No. 10, p. 33.
Sassa, K., Fukuoka, H., Wang, G., Ishikawa, N. (2004) Undrained dynamic-loading ring-shear apparatus and its application to landslide dynamics, Landslides, Vol. 1, pp. 7-19.
Stark, T.D., and Vettel, J.J. (1992) Bromhead ring shear test procedure, Geotechnical Testing Journal, ASTM, Vol.15, No.1, pp. 24-32.
Rodts, S., Baudez, J.C., and Coussot, P. (2005) From discrete to continuum flow in foams, Europhysics Letters, Vol. 69, No. 4, pp. 636-642.
Tika, T.E., Vaughan, P.R., and Lemos, L.J. (1996) Fast shearing of pre-existing shear zones in soil, Geotechnique, Vol. 46, No. 2, pp. 197-233.
Tika, T.E. and Hutchinson, J.N. (1999) Ring shear tests on soil from the Vaiont landslide slip surface, Geotechnique, Vol. 49, No. 1, pp. 59-74.
Van Asch, Th.W.J., Malet, J.-P., Van Beek, L.P.H., and Amitrano, D. (2007) Techniques, issues and advances in numerical modeling of landslide hazard, Bulletin de la Societe Geologique de France, Vol. 178, No. 2, pp. 65-88.
Van Asch, Th.W.J., Van Beek, L.P.H., and Boggard, T.A. (2007) Problems in predicting the mobility of slow-moving landslides, Engineering Geology, Vol. 91, pp. 46-55.
Wang. F.W., Sassa, K., and Wang, G. (2002) Mechanism of a longrunout landslide triggered by the August 1998 heavy rainfall in Fukushima Prefecture, Japan, Engineering Geology, Vol. 63, pp. 169-185.
WP/WLI. (1995) A suggested method for describing the rate of movement of a landslide. International Union of Geological Sciences Working Group on Landslides: Bulletin of the International Association of Engineering Geology, Vol. 52, No. 1, pp. 75-78.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.