최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.37 no.3, 2013년, pp.295 - 302
문창선 (서강대학교 기계공학과) , 김낙수 (서강대학교 기계공학과)
The two cross-roll straightening process at room temperature is a manufacturing method for improving the straightness of a drawn wire. The distribution and magnitude of the internal and surface residual stresses of the drawn wire are changed after the wire-drawing process through the two cross-rolls...
Mutrux, A., Berisha, B., Hochholdinger, B. and Hora, P., 2008, "Numerical Modelling of Cross Roll Straightening," LS-DYNA Anwenderforum.
Mutrux, A., Berisha, B. and Hora, P., 2010, "FE Simulation of Cross Roll Straightening: a Strain Tensor Field Approach," American Institude of Physics, Vol. 1252, pp. 941 -948.
Mutrux, A., Berisha, B., Hora, P., 2011, "Prediction of Cyclic Softening in a Medium Carbon Steel During Cross Roll Straightening," Journal of Materials Processing Technology, Vol. 211, pp. 1448 - 1456.
Kim, Y., Lee, S. W., Han, D. S. and Han, G. J., 2007, "The Influence on the Bar Straightness and Plastic Deformation the Roll intersection angle of a Two Roll Straightener," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, pp. 76-80.
Talukder, N. K. D., Singh, A.N. and Johnson, W., 1990, "Cross-Roll Straighteners and their Performance," Journal of Materials Processing Technology, Vol. 21, pp. 101 - 109.
Wu, B. J., Chanb, L. C., Leeb, T.C. and Ao, L. W., 2000, "A Study on the Precision Modeling of the Bars Produced in Two Cross-Roll Straightening," Journal of Materials Processing Technology, Vol. 99, pp. 202 - 206.
Nastran, M. and Kuzman, K., 2002, "Stabilisation of Mechanical Properties of the Wire by Roller Straightening," Journal of Materials Processing Technology, Vol. 125-126, pp. 711 - 719.
Wang, M. T., Li, X. T. and Du, F. S., 2009, "Analysis of Metal Forming in Two-Roll Cress Wedge Rolling Process Using Finite Element Method." Journal of Iron and Steel Research, International, Vol. 16, pp. 38 - 43.
Srimani, S. L., Pankaj, A. C. and Basu, J., 2005, "Analysis of End Straightness of Rail During Manufacturing," International Journal of Mechanical Science, Vol. 47, pp. 1874-1884.
Kim, W. K., Sin, H. G., Kim, B. H. and Kim, H. Y., 2007, "Straightening of Micro Wires Using the Direct Wire Heating and Pulling Method," International Journal of Machine Tools & Manufacture, Vol. 47, pp. 1046 - 1052.
Balica, J. and Nastran, M., 2002, "An on-line Predictive System for Steel Wire Straightening Using Genetic Programming," Engineering Applications of Artificial Intelligence, Vol. 15, pp. 559 -565.
Yamashita, T. and Yoshida, K., 2005, "Tensile Straightening of Superfine Wire and Residual Stress Measurement Using Focused Ion Beam," The Japan Society of Mechanical Engineer, Vol. 48, pp. 322 -328.
Lu, H., Zhang, X., Leopold, J., Ling, H. and Changqiao Guo, 2008, "Straightening Model and Prediction of Straightening Stroke of Precision Linear Guide Rail," In Proceedings of ICIRA(2), pp. 321 -328.
Dvorkin, E. N. and Medina, F. M., 1991, "Finite Element Models for Analyzing the Straightening of Steel Seamless Tubes," Trans. American Society of Mechanical Engineer, Vol. 133, pp. 224 - 232.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.