다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Smart structures and systems, v.11 no.3, 2013년, pp.299 - 314
Yan, Ruqiang (School of Instrument Science and Engineering, Southeast University) , Qian, Yuning (School of Instrument Science and Engineering, Southeast University) , Huang, Zhoudi (School of Instrument Science and Engineering, Southeast University) , Gao, Robert X. (Department of Mechanical Engineering, University of Connecticut)
AI-Helper
This paper presents a nonlinear time series analysis technique for evaluating machine defect severity, based on the Recurrence Plot (RP) entropy. The RP entropy is calculated from the probability distribution of the diagonal line length in the recurrence plot, which graphically depicts a system's dy...
Asok, K., Rafal, S.L., Grzegorz, L. and Krzysztof, G. (2008), "Analysis of cycle-to-cycle pressure oscillations in a diesel engine", Mech. Syst. Signal Pr., 22(2), 362-373.
Donner, R., Scholz-Reiter, B. and Hinrichs, U. (2008), "Nonlinear characterization of the performance of production and logistic networks", J. Manuf. Syst., 27(2), 84-99.
Eckmann, J.P., Kamphorst, S.O. and Ruelle, D. (1987), "Recurrence plots of dynamic-systems", Europhys. Lett., 4(9), 973-977.
Fraser, A.M. and Swinney, H.L. (1986), "Independent coordinates for strange attractors from mutual information", Phys. Rev. A., 33(2), 1134-1140.
Gao, J.B. (1999) "Recurrence time statistics for chaotic systems and their applications", Phys. Rev. Lett., 83(16), 3178-3181.
Gao, J.B. and Cai. H.Q. (2000), "On the structures and quantification of recurrence plots", Phys. Lett. A., 270(1-2), 75-87.
Grassberger, P. and Procaccia, I. (1983), "Measuring the strangeness of strange attractors", Physica D, 9(1-2), 189-208.
Grzegorz, L., Tomasz, K., Jacek, C. and Dariusz, Z. (2007), "Cycle-to-cycle oscillations of heat release in a spark ignition engine", Meccanica, 42(5), 423-433.
Inoue, E., Mitsuoka, M. and Rabbani, M. (2011), "Investigation of nonlinear vibration characteristics of agricultural rubber crawler vehicles", Ama-Agricultural Mechanization in Asia Africa and Latin America, 42(1), 89-93.
Janjarasjitt, S., Ocak, H. and Loparo, K.A. (2008), "Bearing condition diagnosis and prognosis using applied dynamical analysis of machine vibration signal", J. Sound Vib., 317(1-2), 112-126.
Jardine, A.K.S., Lin, D.M. and D Banjevic (2006), "A review on machinery diagnostics and prognostics implementing condition-based maintenance", Mech.Syst. Signal Pr., 20(7), 1483-1510.
Kantz, H. and Schreiber, T. (1997), Nonlinear Time Series Analysis, Cambridge University Press, UK.
Kennel, M.B., Brown, R. and Abarbanel, H.D. (1992), "Determining embedding dimension for phase-space reconstruction using a geometrical construction", Phys. Rev. A., 45(6), 3403-3411.
Koebbe, M. and Mayer-Kress, G. (1992), "Use of recurrence plots in the analysis of time-series data, in: (Eds. M. Casdagli and S. Eubank)", Proceedings of the SFI Studies in the Science of Complexity, vol. XXI, Redwood City, Addison-Wesley, Reading, MA, 361-378.
Kim, H.S., Eykholt, R. and Salas, J.D. (1999), "Nonlinear dynamics, delay times and embedding windows", Physica D, 127(1-2), 48-60.
Li, X., Ouyang, G., Yao, X. and Guan, X. (2004), "Dynamical characteristics of pre-epileptic seizures in rats with recurrence quantification analysis", Phys. Lett. A., 333(1-2), 164-171.
Loparo, K.A. (2011), http://www.eecs.cwru.edu/laboratory/bearing/, (Accessed 2011).
Marwan, N., Wessel, N., Meyerfeldt, U., Schirdewan, A. and Kurths, J. (2002), "Recurrence plot-based complexity and their application to heartrate variability data", Phys. Rev. E. , 66(2), 026702.
Marwan, N. (2003), Encounters with neighbors: current developments of concepts based on recurrence plots and their applications, Ph.D. Thesis, University of Potsdam, Potsdam.
Marwan, N. and Meinke, A. (2004), "Extended recurrence plot analysis and its application to ERP data", Int. J. Bifurcat. Chaos, 14(2), 761-771.
Marwan, N., Carmen Romano, M., Thiel, M. and Kurths, J. (2007), "Recurrence plots for the analysis of complex systems", Phys. Report, 438(5-6), 237-329.
Mhalsekar, S.D., Mohan, G., Rao, S.S. and Gangadharan, K.V. (2009), "Determination of transient and steady state cutting in face milling operation using recurrence quantification analysis", ARPN J. Eng. Appl.Sci., 4(10), 36-46.
Nichols, J.M., Trickey, S.T. and Seaver, M. (2006), "Damage detection using multivariate recurrence quantification analysis", Mech. Syst. Signal Pr., 20(2), 421-437.
Schreiber, T. and Schmitz, A. (2000), "Surrogate time series", Physica D., 142(3-4), 346-382.
Shi, D.F., Tsung, F. and Unsworth, P.J. (2004), "Adaptive time-frequency decomposition for transient vibration monitoring of rotating machinery", Mech. Syst. Signal Pr., 18(1), 127-141.
Sinha J.K. (2006), "Bi-spectrum for identifying crack and misalignment in shaft of a rotating machine", Smart Struct. Syst., 2(1), 47-60.
Takens, F. (1981), "Detecting strange attractors in turbulence", Dynamical Systems and Turbulence, Lecture Notes in Mathematics, (Eds. Rand, D. A. and Young, L.S ), Springer-Verlag, Berlin, 366-381.
Tao, X., Du, B. and Xu, Y. (2007) "Bearing fault diagnosis based on GMM model using Lyapunov exponent spectrum", Proceedings of the 33rd Annual Conference of the Industrial Electronics Society, Nov. 5-8.
Theiler, J., Eubank, S., Longtin, A., Galdrikian, B. and Farmer, J.D. (1992), "Testing for nonlinearity in time series: the method of surrogate data", Physica D., 58(1-4), 77-83.
Thiel, M., Romano, M.C., Kurths, J., Meucci, R., Allaria, E. and Arecchi, F.T. (2002), "Influence of observational noise on the recurrence quantification analysis", Physica D. ,171(3), 138-152.
Wang, S., Huang, W. and Zhu, Z.K. (2011), "Transient modling and parameter identification based on wavelet and correlation filtering for rotating machine fault diagnosis", Mech. Syst. Signal Pr., 25(4), 1299-1320.
Wang, X.S., Hu, J. and Gao, J.B. (2006), "Nonlinear dynamics of regenerative cutting processes-comparison of two models". Chaos, Soliton. Fract., 29(5), 1219-1228.
Webber, C.L. and Zbilut, J.P. (1994), "Dynamical assessment of physiological systems and states using recurrence plot strategies", J. Appl. Physiol., 769(2), 965-973.
Yan, R. and Gao, R. (2004), "Complexity as a measure for machine health evaluation", IEEE T. Instrum. Meas., 53(4), 1327-1334.
Yan, R. and Gao, R. (2007), "Approximate entropy as a diagnostic tool for machine health monitoring", Mech. Syst. Signal Pr., 21(2), 824-839.
Yan, R., Liu, Y. and Gao, R. (2010), "Correlation dimension analysis: a non-linear time series analysis for data processing", IEEE T. Instrum. Meas., 13(6), 19-25.
Zbilut, J.P. (1998), "Detecting deterministic signals in exceptionally noisy environments using cross-recurrence quantification", Phys. Lett. A., 246(1-2), 122-128.
Zbilut, J.P. and Webber, C.L. (1992), "Embeddings and delays as derived from quantification of recurrence plots", Phys. Lett. A., 171(3-4), 199-203.
Zbilut, J.P., Zaldivar-Comenges, J.M. and Strozzi, F. (2002), "Recurrence quantification based Liapunov exponents for monitoring divergence in experimental data", Phys. Lett. A., 297(3-4), 173-181.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.