최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.33 no.2, 2013년, pp.226 - 231
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
시간-분해 펄스 열화상의 결과는 어떻게 구성되는가? | 수년간에 걸쳐 일반적으로 펄스열화상(pulse thermography; PT) - 으로 일컫는 시간 분해 열화상을 적용한 비파괴평가에 관해 많은 연구가 진행되어 왔다[1,2]. 진폭 또는 진폭 콘트라스트 영상에 의해 그 결과가 구성되는 시간-분해 펄스 열화상은 위상잠금열화상(locked-in thermography; LT)[3] - 과 펄스 또는 펄스 콘트라스트 위상으로 이어지는 펄스위상열화상(pulse phase thermography; PPT)[4]과 비교할 때 수용할 수 없을 정도로 취약한 것으로 인식되고 있다. 이러한 취약성이 발생하는 이유는 테스트 샘플의 광학적 상태량(흡수율과 방사율)의 공간 변동성에 따른 온도 상승 및 자극하는 열유속에 강력히 의존하기 때문이다. | |
펄스열화상을 이용하기 위해 필수적인 것은? | Fig. 1에 보여지는 것처럼 펄스열화상을 이용하기 위해서는 직교좌표계가 아닌 로그-로그 좌표계에서 서모그램을 플롯하는 것이 필수적이다. 한 예로 설정된 카메라로부터의 실험으로부터 살펴보도록 한다[9]. | |
시간-분해 펄스 열화상에 취약성이 발생하는 이유는 무엇인가? | 진폭 또는 진폭 콘트라스트 영상에 의해 그 결과가 구성되는 시간-분해 펄스 열화상은 위상잠금열화상(locked-in thermography; LT)[3] - 과 펄스 또는 펄스 콘트라스트 위상으로 이어지는 펄스위상열화상(pulse phase thermography; PPT)[4]과 비교할 때 수용할 수 없을 정도로 취약한 것으로 인식되고 있다. 이러한 취약성이 발생하는 이유는 테스트 샘플의 광학적 상태량(흡수율과 방사율)의 공간 변동성에 따른 온도 상승 및 자극하는 열유속에 강력히 의존하기 때문이다. 이 의존성은 효율적인 처리의 여부에 따라 사실이 아니기도 하다. |
D. L. Balageas, J. C. Krapez and P. Cielo, "Pulsed photothermal medelling of layered material," J. of Applied Physics, Vol. 59, No. 4, pp. 348-357 (1986)
D. L. Balageas, A. A. Deom and D. M. Boscher, "Characterization and non-destructive testing of carbon-epoxy composites by a pulsed photothermal method," J. of Materials and Evaluation, Vol. 45, No. 4, pp. 461-465 (1987)
G. Busse, D. Wu, W. Karpen, "Thermal wave imaging with phase sensitive modulated thermography," J. of Applied Physics, Vol. 71, No. 8, pp. 3962-3965 (1992)
X. Maldague and S. Marinetti, "Pulse phase thermography," J. of Applied Physics, Vol. 79, pp. 2694-2698 (1996)
S. G. Pickering and D. P. Almond "An evaluation of the performance of an uncooled microbolometer array infrared camera for transient thermography NDE," J. of Nondestructive Testing and Evaluation, Vol. 22, No. 22, pp. 63-70 (2002)
M. A. Omar and Y. Ahou, "Matched excitation energy comparison of the pulse and lock-in thermography NDE technique," Infrared Physics & Technology, Vol. 51, No. 4, pp. 300-306 (2008)
S. G. Pickering and D. P. Almond "An evaluation of the performance of an uncooled microbolometer array infrared camera for transient thermography NDE," NDT&E International, Vol. 69, No. 8, pp. 935-942 (2011)
T. Tazumi and Y. Takahashi, "Novel finite pulse-width correction in flash thermal diffusivity measurements," Review of Scientific Instruments, Vol. 52, No. 9, pp. 1411-1413 (1981)
D. L. Balageas, "Thickness or diffusivity measurements from front-face flash experiments using the TSR (thermographic signal reconstruction) approach," QIRT 2010 Proc., X. Maldague Ed., QC, Canada, pp. 873-880 (2010)
P. Cielo, "Pulse photothermal evaluation of layered materials," J. of Applied Physics, Vol. 56, No. 1, pp. 230-234 (1984)
J. C. Murphy, L. C. Aamodt and G. C. Wetsel, "Coating thickness determination using time dependent surface temperature measurements," Review of Progress in Quantitative Nondestructive Evaluation, Vol. 6A, pp. 277-284 (1987)
H. Schenck, "Theory of Engineering Experintation," 3rd Ed. Hemisphere Publishing Co., (1979)
S. M. Shepard, J. R. Lhota and T. Ahmed, "Measurements limits in flash thermogarphy," Thermosense XXXI, SPIE Proc., 2009-T-1, pp. 72990-72997 (2009)
V. Vavilov, "Nondestructive Testing Handbook," Vol. 5, Book 1: Thermal/infrared testing, Moscow-Specktr Publishing House (2009)
D. L. Balageas, P. Delpech, D. Boscher and D. Deom, "A new developments in stimulated infrared thermography applied to nondestructive testing of laminates," Review Progress in QNDE, Vol. 10A, pp. 1073-1081 (1991)
D. L. Balageas, B. Chapuis, G. Deban and F. Passilly, "Improvement of the detection of defects by pulse thermography thanks to TSR approach in the case of a smart composite repair patch," QIRT Journal, 2010b, Vol. 7, No. 2, pp. 167-187 (2010)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.