최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국해양환경ㆍ에너지학회지 = Journal of the Korean Society for Marine Environment & Energy, v.16 no.2, 2013년, pp.61 - 70
Hydrodynamic aspects on three-dimensional effects were investigated in this study for simple and convenient conversion of tidal stream energy using a Vertical-Axis Turbine (VAT). Numerical approach was made to reveal the differences of flow physics between 2-D estimation and rigorous 3-D simulation....
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
k-ω SST model은 k-ε model에 비해 어떤 장점을 지녔는가? | 3차원 터빈 해석시 격자 생성의 간편함을 위하여 스트럿은 제외하였다. 난류모델은 k-ω SST model을 사용하였는데 이는 k-ε model에 비해 아주 작은 y+가 요구되기 때문에 그에 따라 격자수가 증가하지만 회전하는 물체 해석에 적합한 장점을 가지고 있다. Fig. | |
조류발전용 수직축터빈의 3차원 효과를 일으키는 주된 원인은 무엇인가? | 수치해석은 2차원과 3차원으로 수행하였으며 이를 통해 물리적 유동현상의 차이를 파악하였다. 3차원 효과는 주로 날개 끝단에서 발생하는 날개끝 보오텍스가 주된 원인으로서, 이로 인해 터빈 날개가 내어주는 양력이 손실되고 회전하는 터빈은 토크가 감소하였다. 이러한 현상은 본 연구에서 채택한 통상적인 수직축 터빈의 스팬-직경비 범위에서 상당한 수준으로 나타남을 확인하였다. | |
슬라이딩 격자기법의 강점은 무엇인가? | [2010]이 적용하였던 슬라이딩 격자기법(Sliding mesh)을 사용하였다. 슬라이딩 격자기법을 적용하기 위해 회전영역과 회전하지 않는 영역의 경계면에 인터페이스 조건을 사용하였는데, 이는 터빈 로터와 그 주위 격자를 이어주면서 격자수를 감소시킬 수 있는 강점이 있다. 터빈의 회전은 시간 간격당 2. |
Abbott, H. I et al., 1959, "Theory of Wing Sections including a summary of airfoil data", 632-633.
Calcagno, G. and Moroso, A., 2006, "Experiment and Numerical investigation of an Innovative Technology for Marine Current Exploitation: the Kobold Turbine", Proc. of 16th International Offshore and Polar Engineering Conference, San Francisco, California, USA, May 28-June.
Castelli, M. R. et al., 2011, "The Darrieus wind turbine : Proposal for a new performance prediction model based on CFD", Energy, Vol.36, 4919-4934.
Han, J.S., Hyun, B.S., Choi, D.H., Mo, J.O., Kim, M.C. and Rhee, S.H., 2010, "Study on Design of Darrieus-type Tidal Stream Turbine Using Parametric Study", J. of the Korean Society for Marine Environmental Engineering, Vol.13, No.4, 241-248.
Howell, R. et al., 2010, "Wind tunnel and numerical study of a small vertical axis wind turbine", Renewable Energy, Vol.35, 412-422.
Hyun, BS et al., 2012, "Development of Standardized S/W System for the Integrated Design of Tidal Current Turbines", Final Report, Tidal Stream Energy Research Center, Busan, Korea.
Laneville, A. and Vittecoq, P., 1986, "Dynamic Stall: The Case of the Vertical Axis Wind Turbine", Journal of Solar Energy Engineering, Vol.108, 140-145.
Li, Y. and Calisal, S. M., 2010, "Three-dimensional effects and arm effects on modeling a vertical axis tidal current turbine", Renewable Energy, Vol.35, 2325-2334.
Mitsuhiro, S. et al., 2000, "An Experimental Study of the Characteristics of a Darrieus Turbine for Tidal Power Generation", J. of Electrical Engineering in Japan, Vol.132 (Translated from Denki Gakkai Ronbunshi, Vol.118-B, 781-787, 1988).
Paraschivoiu, I. et al., 1988, "Blade Tip, Finite Aspect Ratio, and Dynamic Stall Effects on the Darrieus Rotor", J. of Propulsion, Vol.4, No.1, 73-80.
Paraschivoiu, I., 2002, "Wind Turbine Design with Emphasis on Darrieus Concept", 177-188.
Sheldahl, R et al., 1981, "Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines", Technical Report SAND 80-2114, Sandia National Labs., Alberquerque, USA.
Winchester, J. D et al., 2009, "Torque ripple and variable blade force : A comparison of Darrieus and Gorlov-type turbines for tidal stream energy conversion", Proc. of 8th European Wave and Tidal Energy Conference, Uppsala, Sweden.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.