참고문헌 (11)

1. Journal of the Japan Society for Precision Engineering H Itagaki 78 2 168 2012 10.2493/jjspe.78.168 Itagaki, H., Tsutsumi, M., and Iwanaka, H., “Improvement of vibration damping of linear roller guides using grease lubrication film,” Journal of the Japan Society for Precision Engineering, Vol. 78, No. 2, pp. 168-172, 2012. 

   상세보기

2. Journal of Acoustic Emission K Bollas 28 215 2010 Bollas, K., Papasalouros, D., Kourousis, D., and Anastasopoulos, A., “Acoustic emission inspection of rail wheels,” Journal of Acoustic Emission, Vol. 28, pp. 215-228, 2010. 

3. Tribology International N Tandon 32 8 469 1999 10.1016/S0301-679X(99)00077-8 Tandon, N. and Choudhury, A., “A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings,” Tribology International, Vol. 32, No. 8, pp. 469-480, 1999. 

   상세보기

4. Int. J. Precis. Eng. Manuf. Y Chen 13 3 357 2012 10.1007/s12541-012-0045-z Chen, Y., He, Z., and Yang, S., “Research on on-line automatic diagnostic technology for scratch defect of rolling element bearings,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 3, pp. 357-362, 2012. 

   원문보기 상세보기

5. Mechanical Systems and Signal Processing A M Al-Ghamd 20 7 1537 2006 10.1016/j.ymssp.2004.10.013 Al-Ghamd, A. M. and Mba, D., “A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size,” Mechanical Systems and Signal Processing, Vol. 20, No. 7, pp. 1537-1571, 2006. 

   상세보기

6. Journal of Japan Society for Precision Engineering Y Sakai 78 7 599 2012 10.2493/jjspe.78.599 Sakai, Y. and Tsutsumi, M., “Resonance frequency of carriages for linear roller guides,” Journal of Japan Society for Precision Engineering, Vol. 78, No. 7, pp. 599-604, 2012. 

   상세보기

7. Journal of Acoustic Emission A J Brunner 28 59 2010 Brunner, A. J., Tannert, T., and Vallee, T., “Waveform analysis of acoustic emission monitoring of tensile tests on welded wood-joints,” Journal of Acoustic Emission, Vol. 28, pp. 59-67, 2010. 

8. Journal of Acoustic Emission K Ono 28 256 2010 Ono, K., Cho, H., and Matsuo, T., “New characterization methods of AE sensors,” Journal of Acoustic Emission, Vol. 28, pp. 256-277, 2010. 

9. Journal of Acoustic Emission V Barat 28 109 2010 Barat, V., Borodin, Y., and Kuzmin, A., “Intelligent AE signal filtering methods,” Journal of Acoustic Emission, Vol. 28, pp. 109-119, 2010. 

10. Journal of Acoustic Emission E Castro 28 120 2010 Castro, E., Piotrkowski, R., Antolino, C., and Climent, A. B., “Discrimination of acoustic emission hits from dynamic tests of a reinforced concrete slab, Journal of Acoustic Emission, Vol. 28, pp. 120-128, 2010. 

11. Mechanical Systems and Signal Processing C S Park 38 2 534 2013 10.1016/j.ymssp.2013.02.017 Park, C. S., Choi, Y. C., and Kim, Y. H., “Early fault detection in automotive ball bearings using the minimum variance cepstrum,” Mechanical Systems and Signal Processing, Vol. 38, No. 2, pp. 534-548, 2013. 

    상세보기