최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.25 no.3, 2013년, pp.119 - 125
유성연 (충남대학교 기계설계공학과) , 김태호 (충남대학교 대학원)
IInsulation material is generally used for preventing heat loss from heat transport fluids, and water absorption severely reduces the insulation property. The purpose of this study is to evaluate the amount of water absorption supplied by the pouring method and spraying method, to investigate the ef...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
단열재 선정에 있어서 가장 중요한 요소는 무엇인가? | 단열재 선정에 있어서 가장 중요한 요소는 열전도계수와 내구성이며, 사용 중 수분의 흡수는 단열재의 단열성과 내구성에 큰 영향을 미친다. 일반적으로 물의 열전도계수는 유리솜의 약 15배이며, 단열재에 수분이 흡수되면 단열성능이 저하되고 배관, 장치 혹은 마감재의 부식을 조장하거나 단열재 처짐 현상을 야기한다. | |
단열재에 수분이 흡수되는 방법에는 어떤 것들이 있는가? | 단열재에 수분이 흡수되는 방법에는 직접적인 수분과의 접촉, 대기 중의 수분과의 접촉, 수증기의 응축 등이 있으며 이때의 수분 분포는 흡수 또는 접촉된 수분과 단열재 내 수분 유동의 복합적인 현상에 의해 이루어진다.(3) 섬유계 단열재의 경우 90%의 상대습도에서 2% 혹은 그 미만(질량기준)의 수분 흡수가 이루어진다고 보고된 바 있다. | |
수분 흡수량이 단열성능에 미치는 영향을 규명하기 위해 본 연구에서 수행한 방법은? | 본 연구의 목적은 단열재의 수분 흡수성을 분석하고 모델을 개발하여 수분 흡수량이 단열성능에 미치는 영향을 규명하는 것이다. 이를 위해 수분 흡수가 잘되는 E-glass와 수분 흡수가 잘 되지 않는 HYPERLITE 단열재를 비교⋅평가하였다. 또한 수분 공급방법으로 단열재 중앙에 물을 직접 쏟아 붓는 Pouring 방법과 단열재 전체에 물을 골고루 분무시키는 Spraying 방법을 사용하여 결과를 비교하였다. |
Kim, J. S., 2011, Effective application of insulating material for green plant, NICE, Vol. 29, No. 1, pp. 77-84.
Park, S. B., 2005, An experimental study on thermal conductivity characteristics of a composite insulation by heat flux method, M.S. thesis, Seoul National University of Science and Technology, Seoul, Korea.
Fan, J., Cheng, X. and Chen, Y. S., 2003, An experimental investigation of moisture absorption and condensation in fibrous insulations under low temperature, Experimental Thermal and Fluid Science, Vol. 27, pp. 723-729.
Langlais, C., Hyrien, M. and Klarsfeld, S., 1982, Moisture migration in fibrous insulating materials under the influence of a thermal gradient and its effect on thermal resistance, ASTM STP 779, pp. 191-206.
Thomas, W. C., Bal, G. P. and Onega, R. J., 1983, Heat and moisture transfer in a glass roof-insulating material, ASTM STP 789, pp. 582-601.
Wijeysundera, N. E., Hawlader, M. N. A. and Tan Y. T., 1989, Water vapor diffusion and condensation in fibrous insulations, Int. J. Heat Mass Transfer, Vol. 32, No. 10, pp. 1865-1878.
Murata, K., 1995, Heat and mass transfer with condensation in a fibrous insulation slab bounded on one side by a cold surface, Int. J. Heat Mass Transfer, Vol. 38, No. 17, pp. 3253-3262.
Kim, S. H., Park, J. I., Lee, M. W. and Hong, J. K., 2006, The estimation on the insulation performance of thermal insulation materials according to water vapor permeance, Proceedings of Summer Annual Meeting of SAREK, pp. 1012-1018.
Bang, L. B. and Oh, M. D., 2002, Performance evaluation of insulation materials, Proceedings of Summer Annual Meeting of SAREK, pp. 761-766.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.